After creating a series of grid lines. when i try to select any one of them, it automatically shifts the grid line up several feet (in the plan view) and shifts it over to make it an even distance from the next gridline. therefore it is no longer in the correct position (or aligned with the rest of the grid lines). is there a snap setting or something i am missing when i just want to select a grid line without moving it? even with snaps off, it still happens.
Is there a way to create a coordinate system which will have a projection with a shift grid. I want to create a coordinate system with a seven parameter datum transformation an a trnsverse Mercator projection in whichi want to use a shift grid file
I am attempting to query some mapdata from a NAD27 drawing to a NAD83 drawing and when I do a quick view or a query, Map3D 2012 ( a new installation on Windows 7) crashes. I have the NTV2_0.GSB in the c:ProgramDataAutodeskGeospatial Coordinate SystemCanada directory and have edited the NAD27toNAD83.gdc file accordingly but to no avail.
This setup has been working on my previous Map installations (Map3D 2007 on XP, Map3D 2010 on XP & Map3D 2010 on Windows 7) so I know I have working configuration files.
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
If I go to Edit and choose "Select none", they are deselected for a a few brief seconds and then highlighted again. If I go to another photo, it leaves one of the previous photos selected and also selects the second photo. I've tried restartting Lightroom, restarting Windows 8.1, all to no avail.
I can scroll through a bunch of photos while in grid view with the right side slider when I am looking at a folder with 15,000 images or less, but when I click the All Photographs, there is no little slider button. The slider tray is visible, but no button to drag. The catalog has 180,000 images now.
I tried using a text search within my All Photographs which brought up 71,000 images. The slider showed up fine with that many images.
[URL] How is it possible that I place an aligned dimension between two paralel grids and the dimensions changes as I drag it up and down? First of all, in order to be able to place an aligned dimensions the objects have to be absolutely paralel to each other, so I don't get why when I move the dimension it changes. If the grids were really not paralel to each other Revit shouldn't allow me to place the aligned dimension in the first place, isn't that right?
I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
I'm trying to put some lines or grid to a part of my layout (header) in PS. Even a header is on separate layer I can't do it. I can put lines (or pattern) on whole picture but cant on part when select. I did try mask and all I can remember. Is this posible?
I am getting a problem that whenever i exported corel file to pdf. It's showing grid lines on pdf file whereas corel file doesn't showing any gridlines nor i checked "show grid lines".
I know what's causing the problem. The problem is when i updated my CD X5 to X6, In each file a popup palette came saying "to update the text, click update". I clicked on update. Since then this problem is occurring only those file on which i clicked update.Making a new file with copy paste option is last choice.
I'm just trying to do the same job I've been doing for years but have a sudden problem seeing which lines I've selected. I suspect I've switched something on or off somewhere. I select a single line and it is highlighted. I tselect more than one and there's just a great box which also encompasses lines I was not selecting. The individual lines are not highlighted (as they used to be) so I can't see what really has been selected.
I know the grid creation by View->Show->Grid, but I cannot find how to change the distance between grid lines. I need it since they are too close, I can hardly see the picture.
PS pat files are patterns? how used, applied & imported to PS? How appear Grid lines(eg 960 grid system; how configure?) when designing a mockup with PS cc or cs6?
PS cs6 -to-> PS cc needed uninstall/reinstall... or can use upon update (no uninstall)?
I remember being able to select 'Print Grid' back when I used AutoCAD 2000, but never needed to print the grid lines until about a year ago. AutoCAD and AutoCAD LT cannot do this. It seems only AutoCAD Civil 3D users have this option. Basically I need to print the drawing with a grid on paper and/or a mobile device so a field technician can draw conditions to scale easily and accurately. I realize this must not be in high demand, but there are a number of users who have asked about this. They are told that it is only a 'drawing aid' and they should array their construction lines to print their own grid. This is not a good solution for repetition of printing scaled field drawings, and certainly not 'state of the art' technology. Is this feature removed so we will have to search out the higher priced product? It seems like 'Print Grid' could be easily returned to all AutoCAD. Probably just a system variable that was removed when we weren't looking.
I am having a problem with my grid lines F7 coming back on, there is no consistency or reason that I can see that might be turning them back on, I can be zooming in and out, stretching something, dimensioning something?
i open a new picture i have to first ctr h to turn off the extra grid lines in order to view my pcitures , is there a way to turn off the extra grid lines permanently so i dont have to do it every time i open a new picture?
Is there an easier way to create gridlines as a design element? I know you can set/adjust the grid in the preferences, but I would like to be able to have the gridlines as something editable (changing colors/scale, etc.) and as an element in the piece (as opposed to just a guide overlay that's not integrated).
Up til now I've been doing this the hard way, using guides and the line tool to create/copy/move each line, etc. building it piece by piece...while this works,
Any way to create NE grid lines or ticks and labels around the perimeter of a viewport. I found a VBA program online, but I'm using 2011 and it uses .net. Is there a way to convert VBA to .net?
I want a grid where a grid line is drawn every 10mm, with division lines every 1mm.
When I set this up in illustrator the grid lines (major) render fine but I am not seeing any division (minor) lines at all. Is this the defauld behaviour in illustrator?
