Possible to create a Detail item with Instance Parameters contraints so that I can adjust to get both solutions?I guess the solution could go along some diagonal stretch of the diagonal lines?
View 2 Replies
I want to create an Egress path that automatically shows me the total length and also works through multiple levels. Cadastrophe had provided a method to do that with details. This gives good results. however, I didn't see a way to use it on stairs and multiple levels (for total length inc. mezzanines etc.)
I created a method with railings that seems to work including multiple floors and I also could schedule it (s. attached screenshot that shows me the lower floor and also the dashed Egress path on mezzanine). The way I did it was to create balusters that are shaped like arrows, and place them every 4 ft along the railing. So yes it is a bit cheating and a workaround, but works for Egress purposes.
I learned the hard way that railings aren't really families like windows etc. that I can save elsewhere, but more like walls that are not saved and manipulated separately. This also seems to apply to "handrail type", Railing", and "top Rail type". So I only could play with baluster families. However, those couldn't get shared parameters. So I'm a bit limited. I also wasn't able to create subcategories for balusters. So all the railing families are not as flexible as other families.
My concern with using railings is, how do I include actual railing on the stairs when the stair already has the "Egress railing"? And since I can't create subcategories, my views would show the "Egress railings" whenever I show normal railings. The only workaround seems to be to manually hide the railing I don't want to show in each view.
I know of the Stafford Egress method, but think what Cadastrophe provided is much better (and also what my railing does so far).
Wonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
I'm trying combine a Move and Stretch Action such that the same handle MOVES the detail UP/DOWN and STRETCHes the detail RIGHT/LEFT while maintaining the base of the detail line at the reference line. Sounds confusing maybe but this is the most intuitive and elegant way to design it. However, I can't get it to work.
The attached detail achieves the same functionality but is a little clunky.
I had this working just fine, then made some changes (including deleting some reference planes) and now I can't get it to work. I need to lock a diagonal reference plane to the intersection of 2 orthogonal reference planes, so that my door (on an angle) will slide toward the fixed corner, instead of the corner moving toward the door. It must be something simple I did the first time that I'm just not thinking of this time around...
View 5 Replies View RelatedWe work on a double-monitor setup!
Is there a limit for how much you can strech a toolbar.
I keep all my toolbars on a dedicated screen, from the bottom of the screen to the top but they stop streching at about 1035pixels.
The screen has 1680px vertical. As you can see on the SCREEN-SHOT bellow there is a loot of space to strech them but they wont go beyond those 1035px.
In Revit, how can I stretch a building in one direction, including all floors, in either plan or elevation? Let's say a wing of a 3-story building is 20' long, and I want to make it 24' long.
In ACAD, there is the stretch command that uses a fence.
Granted I would have to use stretch on each plan & elevation drawing, but all elements within the fence are sretched.
Do I have to move a grid, and hope that I've locked all walls on all floors to that grid so they move when the grid is moved?
Is it possible to create a View Title Family which have objects which stretch? I know I single line can, but I need to have more that moves to match our graphics standards.
View 2 Replies View RelatedI'd like to create a 3D view of an element to be able to use in different projects. The best logical way I can think of would be to create such element in a project just for that purpose, create 3D views with annotation and then somehow import only those 3D views to the project i'm working on...
I think it can't be done this way but it shows what I want to achieve.
What's the best way to reuse a 3D detail with annotations?
I'm trying to make a layoout on Revit. I have done sections and plans made on Revit and all is ok. But when I try to create a rectangular detail, such as in Plan, which contains a CAD file, I noticed that since the center of Revit is not aligned with the center of the dwg, the detail is moved and takes up a very large rectangle . When I try to drag the window "detail of Plan" within the table layout, the rectangle occupies the entire sheet.
View 2 Replies View RelatedNeed to get rid of a couple of CAD links from a detail view, and only that view. How do I do this without potentially deleting the links from other views?
View 3 Replies View RelatedI put in building section targets and detail targets. When i opened it the next day some were missing from the drawing but the building section and detail views still exist. Where did the targets go/
View 1 Replies View RelatedThere are other people working on details that I need to do callouts for on my plans in Revit-how do I manually manipulate the callout tag without it being associated with anything?
View 9 Replies View RelatedThe project I am working on includes revit data produced from a point cloud. The file I was given has two levels. The first level is fine however; the second level is set 1 foot too high. When I adjust the level elevation (drop it down by 1 foot), all of the elements associated with level two move with it. What I want to do is move the level line without adjusting the associated revit items.
View 3 Replies View RelatedI am making a detail library for the company. When I make my own detail components my element keynote doesn't staywith the component even though I have done new entries to the keynote text and updating everything with the new path gone into the materials and assigned the keynote and the main library file uses the new path to the keynotes. Yet everytime I bring in something new that I have created. I have to resassign the keynote. But if I bring in one of revits detail components, the keynote is right there.
View 1 Replies View RelatedI'm having trouble editing a family I've made. It's a profiled rim for a crate that needs room for a latch. So I need to create a small spacing in the rim so that the latch can fit. I've tried to cut geometry, and edit the family (rim) itself, but I need to edit it in an elevation view and not floor plan.
View 1 Replies View RelatedIs there any option to show all the data of a family according to the attached jpg?
View 3 Replies View RelatedI am having a problem getting my the line weights to upate when I re-load a Revit Detail component back into a project file. The item on the left is the detail component in the family editor and the image on the right is the detail component.
There are no overides set in the visibility setting for detail items-> [name of the line work], however, when I do overide the line weight in the view for the line work, it doe change.
On a view of a wall detail, I added a flashing with a Detail Line which shows only on that view specific detail. The flashing is at the bottom of a wood stud and brick wall in which the brick was added with a repeating detail. Now I want to move slightly the flashing a little lower from where I originally put it, but by doing so the brick also moves and I do not want the brick to move.
I assume something is locked or joined there. My question; How to detach the flashing from the brick so only the flashing line moves?
My firm has tasked, yours truly, with transferring the CAD Detail Library to our new Revit Standards. I started out by converting our CAD details to Revit and saving them in one file in individual Detail Views. The next step is to convert the line weights to the new company standard styles and widths. I thought it would be as simple as selecting an old detail line type then “Selecting All Instances in Entire Project” and converting all of those line styles to the new standard in one fell swoop (rinsing and repeating until all the old line styles were up to date). However, Revit doesn’t allow you to “Select All Instances” of Detail Lines (oops). We have about 500 standard details that need to be converted.
View 2 Replies View RelatedDetail lines have global view settings - you cannot change appearance with a View Template. The Detail Items V/G category doesnt seem to include detail lines.
It is often necessary to use detail lines to avoid the chore of mading up a family to represent simple objects in plan or section - eg complex fixed furnishings like counters and shelves. Then when it comes to doing a schematic electrical layout where I want everything greyed out except the electrical content, I can use V/G overrides on all family content but not the linework. I have to pick all this invidually and then Override Graphics in View.
As with V/G template overrides, I dont want these overrides to permeate globally hence not changing line styles.
Should we be able to right click on a detail callout and choose insert on sheet?
View 1 Replies View RelatedIs it possible to show the exterior walls at a different detail level than the interior walls in the same view? Keep in mind they are all apart of the basic wall system family so there is no editing the family visibility at this point.
View 1 Replies View RelatedOur company prefers to call out Sections and Elevations with a letter and Details as numbers. How can I make this happen in Revit? Can it happen in Revit.
View 2 Replies View RelatedRevit 2013: Was playing around with sketching symbolic lines in a Generic Model family. I added a line and changed its LOD to be visible in fine only. Nevertheless, it was still visible in the family editor even when the view was set to coarse.
1) How can we verify visual behavior of a family while in the family editor if the objects visibility is not governed by LOD settings? (BTW: The family performs correctly when loaded in the project, just not in the family editor).
2) Is the fact that LOD is ignored in the family editor by design or a bug?
3) Is there any visual cue that tells us that a particular line will be not visible at a LOD?
4) Should we be duplicating Ref. Level views in the family to keep things straight?
Is there any way to show my detail views in my elevations?
In autocad we use a little line with the detail number, but I can't find anything like that in revit. I've attached an example.
I have a contractor that created several families for us, and they left all the ref. planes full length, and I what them nearer to the objects. When I open the family all I see is ref. planes, I need to see them, I just want the closer to the parts not stick extremely far away. I can pick them one at a time, but sure would be nice to grab them at once.
View 4 Replies View RelatedWhat governs the location/distance from the object of the "object move symbol" when an item is selected? See attached image. I have selected the blue view reference text but the four way arrow/move symbol is way below it. This isn't using the move command. The arrows can be hard to find in a crowded sheet if it's very far from the item selected.
For reference I have added an image showing the location of the object move symbol for a text item. It's in the upper left corner of the text outline.
Is it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
I working on a project in Revit Architecture and I have the Mechanical (MEP) and Structural (Structure) models linked into my model. I need to reference a detail in the structural model/sheet set. Is there a way to do that without creating a false callout tag with linework?
View 1 Replies View RelatedI have made up furniture for layout views using the metric detail item template. Probably too many in this model category but it was a short cut to achieving presentation layouts. How can I now filter out certain detail items without zapping the rest. In this case it will be loose furniture but some fixed furniture is needed to remain visible in the next stage construction layout views. I want to do this by view template so that a) the view on sheet can be switched back to the presentation layout and b) keep the sheet as a revision rather than a new sheet.
Its not my preferred way of dong this but I am adapting to another architectural practices standard where sheet numbers are fixed and the layouts (GA's) retain the same number through sketch - tender - construction - as built stages (using a status sheet parameter and revision sequence)
