Premiere Pro :: Getting The Correct Output Resolution?
Dec 20, 2013
I am on a mac using CS5.5
I am making a short 10 second sequence to be displayed as a new years promo on two digital billboards. The requirements are that it is in .wmv format which doesnt pose much of an issue but is still relevent, and I need a copy in 880x256 and one in 448x160.
I have tried so many different avenues to get this to work over the course of a few hours and cannot seem to find a way for this to work out in my favor.
I started two seperate sequences each of custom settings with the specified resolution (880x256 and 448x160). I create the sequence for each and fit the frames accordingly.
View 4 Replies
ADVERTISEMENT
Mar 7, 2011
I was using CarelDraw 12 and had an output problen when I purchased a new printer (HP Laserjet 1525) The page is set for portrait, 8 1/2 x 11, as it always has been, the printer prints the top half OK, but shoves the bottom half of the document up so that the final copy printed is 8 1/2 x 8 1/2? I have downloaded a trial version of X5 and it does the same thing so I am assuming it is a printer/driver issue?
View 2 Replies
View Related
Dec 6, 2012
When applying CFX to the clip it ignores resolution of the project and the time line and creates a resolution of the whole CFX based on clip.
In other words 1080 clip in 720 timeline creates CFX with 1080 out node, ( all action creates in 1080 swell) and only then send 1080 output to timeline where it applying resize soft effect. I know i can change resolution of action, but a can't change resolution of output node ( the las node that feeds output to timeline.) Is there an easy way to work around to feed lets say 720 to escape resizing in timeline.
View 2 Replies
View Related
Aug 18, 2011
I am trying to create a 30" 24" poster that contains (12) 3" x 4" photos. I have resized all of the photos from 2.5MB, but the completed poster is only 850kb. I do not think that if I were to print this out to 30" x 24" that it would be 'poster quality'.
when I have the file open I noticed that at the bottom left it has (53.8MB) in parenthesis. create the correct resolution that I need to make sure this poster looks like an actual poster?
View 3 Replies
View Related
Jan 25, 2014
on my system Premiere Pro CC is only using GPU rendering with AVI output formats.
All other formats like MPEG2, Quicktime, H.264 are unfortunatly fully CPU rendered (=slow).
I just upgraded from trial to payed mode and when Premiere started the CUDA was already enabled (might have activated it during trial already).
But anyway I checked if my card was in the support txt file and also used the cuda.zip auto tool to make sure I had no typo.I did this for Premiere Pro CC and also copied the list into the Adobe Media Encoder directory.
So I started playing with input and output formats. It turned out that CUDA is currently only working with AVI output. I installed GPU-Z to check my GPU usage vs CPU usage in the task manager.
As soon as I pick any other output format than AVI - CPU usage during rendering is up to 80-90 and GPU at 0%.
With AVI output GPU ist around 30 and CPU in the 40ties or less as it should be.One of my old applications Cyberlink Power Produces 11 is doing the h264 rendering in half the time.
My System is running on:
Asus P8Z77-V Deluxe with 16GB Ram
Nvidia GeForce GTX 660 Ti (with current Driver - 332.21 )
Windows 8.1 Pro 64-Bit (with Media Center) and latest updates
Current entry in CUDA*.txt file (as printed by Adobe GPUSniffer):
GeForce GTX 660 Ti
And already tried:
GeForce GTX 660Ti
GeForce GTX 660
View 4 Replies
View Related
Feb 6, 2014
I'm editing with RAW RED files straight from camera. Looking good but just want to know what my best possible output file and quality scheme should be.
I want to send out REDlog Film Gamma space for my color session and I've selected that for all my clips but is there any quality debayering setting I should select before output? And to what file extension output? DPX max bit depth? Uncompressed 10-bit?
View 1 Replies
View Related
Jan 27, 2014
I am working with MTS files (AVCHD, 1920x1080, interlaced, 25 fps) in Premiere CS 6, Windows, and want to render my project with the same properties as h.264.
[URL]
A common misconception is that CUDA/OpenCL processing is only used for rendering for previews. That is not true. CUDA/OpenCL processing can be used for rendering for final output, too.
But where/what are the options/settings to use CUDA not only for preview purposes, but for accelerating the rendering of the final output, too?
View 4 Replies
View Related
Jan 29, 2014
how do i crop a video clip to correct the horizon?
View 1 Replies
View Related
Dec 22, 2013
I'm experiencing an interesting issue in Premiere Pro CC. When using Mercury Playback Engine with either CUDA or OpenCL acceleration, the SDI output from my Blackmagic Design Decklink Extreme 3D+ card exhibits a noticable gamma shift towards the dark. When I switch to Software Only playback, the image appears as it should. The image in the viewer window inside Premiere is not affected in any way, just the SDI output. I've confirmed this behavior at multiple frame rates, resolutions and codecs, including ProRes, XDCam and RED. The "Linear Processing" checkbox in sequence settings makes no difference.
It makes the MPE acceleration unusable, and Premiere is very slow without MPE.
View 3 Replies
View Related
Nov 17, 2012
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
View 2 Replies
View Related
Mar 17, 2013
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies
View Related
Aug 25, 2007
I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies
View Related
Feb 18, 2013
I'm trying to create a swatch in Illustrator with our company's colors. I already succeedid in creating a palet with the RGB and CMYK colors, but I also want to do this with the PMS colors.However, I can't seem to find the correct color book in which to locate the correct PMS color.
I only have the number of the PMS color, I don't know which color book to choose?
View 2 Replies
View Related
Oct 23, 2004
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
View 5 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
Feb 17, 2014
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
View 1 Replies
View Related
Apr 14, 2014
Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
View 1 Replies
View Related
May 17, 2011
I am very new to 3DS max design and I am having what I hope is a user problem.
There is a single frame I am rendering and wanting to output to a .png file (I want a transparent background).
The output when saving as a jpg is fine. I have a black object and a white background.
The output when saving as a png is not fine. I have no objects and only the transparent background. The thumbnail preview in Windows shows a solid black image, and opening the image in gimp shows only the background - no objects.
I have also tried saving this as a TGA, but it yields the same results as the PNG.
View 6 Replies
View Related
Aug 30, 2013
I need to output an illustrator file to a 10x10 rasterized jpg. but when I output it as a jpeg it ends up being 1502x1502 (which is 8x8 inches unless I am wrong?) The image is a series of patterns which needs to end up being 10x10.
View 3 Replies
View Related
Sep 17, 2013
When purchasing AI CS6 I was told that I'd be able to export vector only drawings as DXF files. How to do this starting at the very beginning. I've used CAD programs for years and also have experience with Corel Draw however to date most of what I've found posted on the internet having to do with AI dxf export tells me people have difficulty doing this and even when they can the results are messy. I realize AI produced drawings may need to be optimized to reduce the number of points but aside from this any way, from the very beginning including where to look for the necessary commands .
View 1 Replies
View Related
Aug 15, 2013
I've some problems with Adobe Brigde, it's the first time using that an I wanna export some photos but I don't have the tool Output or extract (I don't know the excatlly name in English, I'm working with the french version).
I tried with Ctrl+K ->bootscript but I cannot find the Output took inside.
Another problem with Adobe Extention Manager CC, it's impossible to install new extention, I rode the tutorial but it doesn't work, I want to install some brush for exemple.
View 12 Replies
View Related
Feb 15, 2011
In creating a video output I am looking for WMV Frame Width 720 Frame Height 480. I have created outputs with WMV HD 720 30p that is 1280 by 720... My issue when I stream that wireless over to my game systems or even my laptop. I am getting lagg. I get no lag on video outputs with WMV 720 by 480. Those video I created with Microsoft MM. I just got VideoStudio and its great! , but my issue I would like to output to WMV 720 by 480 and I do not see that option.
I have been on game forums and wireless forums, and since the WMV 720 by 480 and still working. I am trying to use VS3 to output to that for testing.
My setup is that my game systems and laptop are connected to TV in the house so I stream our events to them for people to see.
WMV HD 720 30p that is 1280 by 720 - is causing the lagg...
WMV 720 by 480 - no lagg...
View 3 Replies
View Related
Apr 15, 2011
I use the VideoStudio Pro X4 to edit my videos.
This time I have some problems with the quality of my finished projects. I have tried to burn my project as both DVD and AVCHD. On DVD the quality was really poor with grainy picture.
The AVCHD disc was much better but there was lots of "strobe" in the movie. Especially where I have added transitions and text fields.
My raw video-files is HD video (MTS-files). I also use the proxy tools to make the editing go smoother. I think my computer should handle this without the Roxy, but it doesn't.
I use this settings for my project: Settings --> Project Properties:
Edit File Format: MPEG
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Create Disc --> AVCHD:
MPEG files
24 bits, 1920 x 1080, 25 fps
Lower Field First
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 16000 kbps)
LPCM Audio, 48000 Hz, Stereo
Create Disc --> DVD:
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 14 Replies
View Related
Mar 1, 2012
Is it possible to edit a video, and have the output format, frame rate, etc r3epeat the input? So edit scenes etc, but not alter the quality from input.
View 8 Replies
View Related
Feb 22, 2012
I am working on a simple video with two (3 second) overlay video clips. In the preview window everything looks great. After compressing the overlay clips shrink in height revieling the top & bottom of the main clip. If I over-stretch the overlay clips they still shrink down. I have gotten it to work once (don't know why) but that rendering the audio dropped off when the overlay started and never came back. That's a separate issue.
I saw where one person trying to solve a different issue mentioned to streach the overlay clip by the corners only? Is that important? I also tried turning on and off the "stretch to fit" option. I am not seeing a patern? I have also tried keeping the aspect ration on and off but that does not seem to give consistant results. I am sure it is a combination of some type.
Main clip:
Data rate: 9421 kbps
Video: Windows Media Video 9
24 bit, 1920x1080, 29.970 frames/sec
Aspect Ratio: 1.78:1.00
Overlay clips:
Data rate: 1309 kbps
Video: Windows Media Video 9
24 bit, 1280x720, 25 frames/sec
Aspect Ratio: 1.78:1.00
View 1 Replies
View Related
Feb 10, 2013
I have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
View 5 Replies
View Related
Jan 8, 2012
Is there a way that you can convert a 4.3 import to a 16.9 output? I have imported a musical from a disc which is recorded in 4.3. I would like to output this as a widescreen video. I have tried putting in on the overlay track which gives a better output result but still has the borders each side.
View 5 Replies
View Related
Oct 22, 2012
I recently upgraded from VS Pro X4 to VS Pro X5 and was shocked to see that there is no option to output a project to FLV under '3 Share > Create Video File'. Is this a feature removal or am I cursed with a defective copy of VS Pro X5?
As you can see in the screen above, the option (which was located at the bottom of the menu in VS Pro X4) is absent in VS Pro X5.
View 3 Replies
View Related
Mar 13, 2012
I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703
5.1 Sound - viewtopic.php?f=1&t=41984
View 2 Replies
View Related
Nov 6, 2013
Nowadays, MP4 is widely used video format in our daily life and slowly it became the best popular video format. For some DIY lovers, It believes that you always edit your movies using a video editor like Sony Platinum Suite, Magi Movie Edit Pro Plus and Corel Video Studio Pro, etc. to make a your own style video.
Really happened, I am also a DIY lover and I always to edit my video with Corel Video Studio Pro X6 for playback on my portable device or burn movie to DVD. For example, I am an office worker and I always take much time on my way to work. So I rip the DVD to MP4 on Mac and then edit it with Video Studio Pro X6 for a better enjoyment.
Now let’s cut to the chase! It is really a big and exacting Serendipity. Yesterday I rip and convert my DVDs to my Mac computer and then edit it with my Corel Video Studio Pro X6. To my surprise, Seven minutes HD mp4 video, it just takes 9 minutes to output it. Then suddenly I got an idea, have a test with the entire popular video editor and Make a comparison.
After the test，I found that The same material, the same color and then same configuration，Corel Video Studio Pro X6 is obviously faster than Magi Movie Edit Pro Plus, Premiere CC、EDIUS7.0 and Vegas12, etc. Then I Immediately the video to my MOTOROLA ME865 SD CARDS and then play it with my smartphone, it is very smooth; then I copy the video to my U disk, and inserted it into my hisense flat-panel TV, it works well, too.
Seven minutes of hd MP4, the volume is 592 MB, and then a minute within 100 m on average, that is, an ordinary DVD, hd can hold 45 minutes MP4, convenient to keep the family film. The Conclusion is that ulead video studio has a bright spot, the new version of their X6 version described output hd MP4 has unique advantage! That’s all!
View 1 Replies
View Related
Aug 28, 2007
What settings do I have wrong that I see certain colours in PS, then either 'Save as', a jpg (for web use).. Or even 'Save for web'..
And when I compared the colours to PS, they are different?
Usually more red/magenta in jpg format.
View 7 Replies
View Related
