I was using CarelDraw 12 and had an output problen when I purchased a new printer (HP Laserjet 1525) The page is set for portrait, 8 1/2 x 11, as it always has been, the printer prints the top half OK, but shoves the bottom half of the document up so that the final copy printed is 8 1/2 x 8 1/2? I have downloaded a trial version of X5 and it does the same thing so I am assuming it is a printer/driver issue?
View 2 Replies
I am on a mac using CS5.5
I am making a short 10 second sequence to be displayed as a new years promo on two digital billboards. The requirements are that it is in .wmv format which doesnt pose much of an issue but is still relevent, and I need a copy in 880x256 and one in 448x160.
I have tried so many different avenues to get this to work over the course of a few hours and cannot seem to find a way for this to work out in my favor.
I started two seperate sequences each of custom settings with the specified resolution (880x256 and 448x160). I create the sequence for each and fit the frames accordingly.
i'm using a canon BJC-210 SP bubble jet printer. i try to print a colored image. the output wasn't the same as the original image. try to fix it in the printer prerferences but to no avail. the image is in jpg. format at 100% resolution.
View 7 Replies View RelatedEvery time i print pdf or print to the printer machine, the output is black color no matter what object i print.
View 3 Replies View RelatedI am editing and saving pictures from a original size from the camera width 2623 pixel( 8.73in) X 4166 pixel(13.887in). I need to make prints as 5x7in and 4x6in. It seems that no matter how I size them in adobe CS6 they will not print in correct size at either URL.... which I use for prints. I also have pictures from my new camera, canon 7d and it's picture size is 3456 poixel(48in) X 5184 pixel(72in) , also can't get these sized correctly.
View 3 Replies View Related[URL]
The 8x12 pixel size is 768x1152 and the 8x6 pixel size is 768x576. As to the need of being 11.5 I knew that, but I had this plan to work larger in order to downsize it and not lose any detail of clarity. If I'm understanding some of the other things I read you get a 100 pix per inch, but paint.nets is 96 per inch?
But let me throw a couple more things at you as well. I've made some scrapbook pages in what I had hoped were 10x13's to be printed out for framing...however, when taken to the Walmart printer it cuts off half of one side like the pic is too big..this is even when going for a 11x14 and larger size. I resized them, still cuts them off. Yet I make a 6x4 canvas and try to use it for my desktop background and it's too big for it in the "fill screen" mode, not mention the distortion.
Is there just a simple, cut and dried formula for image, canvas size that will come out the print dimensions I need? I'm sure I'm missing something basic, but my mind only works in basic mode!!
I have a problem with the file name of my pdf, after i publish drawings with DWG To PDF.pc3...I used to be: "the file name of dwg drawing"
+
" - "
+
"the name of the sheet"
--> in my case:
V10.350-05 + - + A4
--> V10.350-05-A4.pdf
But now it becomes always V10_350-05-A4.pdf...how i get the underscore back to a point?
The prepping process should be really simple right? Separate colour layers, using Illustrator, then print each layer onto transparency sheets. Well I'm about to loose my mind.
The image is CMYK, its a single spot colour (I think) which is red and the outlines are black. Printer is a Canon ix6500.
I can't seem to separate the colours in Illustrator CS3?! Why?! When selecting Print > Output > Mode > it won't allow me to select Colour Separations.
I've tried to overcome this by selecting Printer > Adobe Postscript and PPD > Canon ix6500 series. This allows me to select Colour Separations, but then it won't print, it only saves it as a PDF, and prints it as is.
if the print module sends srgb data to the printer by default?
The reason is I use a rip (it controls the printing) and the input needs to be matched so srgb > srgb this is the setting I have at the moment, but then someone meantion it was prophoto rgb which has me thinking?
how to tell photoshop what measurements my image are. But how do I ensure that these measurements will be used when printing?
HOw can I know ahead of time that a certain portion of my image will print.
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
I've been asked to do a poster A2 size 594mm x 420mm 300dpi but when i enter these dimensions my pc is slowing down dramatically. whats the best way to achieve better performance?
View 7 Replies View RelatedColor Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal / vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
With Mac OS10.6.8, Photoshop CS4, and Epson 2880, the correct media profile is not available in the print dialogue box. I have matte black ink installed in the printer, but get only glossy paper options available for media type in the print dialogue.
View 2 Replies View RelatedOur local agency has come up with a requirement that CAD-generated drawings be submitted to them as 200 dpi TIF files, of between 300kb and 900kb. They do not accept dwg, dwf, or even pdf.
When we create a new plotter in AutoCAD, using any of the raster file formats, setup for the format only allows 100dpi. You can create larger numbers of pixels, 1024x768 vs 1600x1200, for example, but that is not translating into higher resolution.
We have tried the route of printing to pdf, then converting to TIF, but the file sizes are coming out far too large.
If we are unable to find a solution, I guess we can always print to hardcopy and then scan to tif. In 1996 I would have been happy to do that, but not now.
Our specific version of AutoCAD is AutoCAD Civil 3D 2013, but I am sure this is more a generic AutoCAD issue.
I'm having problems with printing a color seperation. I'm working with CS5 and it won't allow me to print seperations to a pdf-file. I tried to print to an Adobe PostScript file, but also this won't allow me to select the Separations (Host-Based) or In‑RIP Separations Mode as that option is greyed out.
I followed: [URL]
I made sure all colours are in cmyk and already unsuccessfully checked google for solutions, but i'm sure that i'm just missing a simple option.
Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies View RelatedI am creating colage images in Photoshop CS4. I sometimes use scanned vintage daguerreotypes or other small snapshots. They are often small sized at 3.5" x 4.5" or 4.25" x 5.5". My Epson 835 scanner can scan in at 300, 400, up to 800 dpi. If I intend to print these scans at 8x10, 11x14 or a larger size within the overall collage, should I scan in at the highest dpi allowed by my scanner? Does this make a real difference after 300 in resolution/clarity?
Also, Does Photoshop CS4, in the enlarging process, as I bring the smaller image into my composite and stretch size it up with (T) tool, end up just making "junk pixels" using "Bicubic" or "Bicubic smoother" in the printing from flattened PS file, even tho I scanned in at a high dpi? scan in at best dpi so that the image won't be pixelated, lose resolution as it is used larger inside the final composite collage.
I have a file with multiple externally-linked bitmaps. When I chose "Collect for Output" and check "Automatically gather all files associated with this document", it is not including those bitmaps. I had no problems with X3 or X4 with the same sorts of files.
View 14 Replies View RelatedI have never had to add crop marks to a file for printing. I output to a PDF at full bleed and it gets cut. Period.
Now, on a new project, it has to have the crop marks. Problem is, When I add those, I get marks like the black lines shown in each corner here. Obviously, this is NOT the cut line. The cutline should be more like the ones I have added after the fact in green.
How do I make the marks show up further in to the document (like th green lines) versus showing up at the full bleed's edge?
I have produced some artwork for my the printers in X5 Corel.
The artwork includes two fills using radial fill with two grey colours from the Corel CMYK metalic palette to produce a simulation of a metal finish.
If I output as JPG the moirè is eliminated but as a PDF, even with complex fills going to BITmaps I end-up with the moirè.
This is the output as a JPEG:
and this is the PDF:
Using CorelDraw X5 with Roland ColorRip 2.2?
I'm having trouble with my print/cutable files not exporting properly into ColorRip 2.2. When I open the EPS file I see the art but the cut lines aren't the "marching ants" that normally show up. The lines appear to be part of the art. It was working when I saved in PDF but now thats not working either. This has worked for years, since iv'e used both. This appears to be a new problem. (I rebooted my computer. But to no avail.)I wonder if I have to re-enstall CD X5?
I'm trying to print something 2" tall, but it comes out 1.875" tall on paper. I'm using CorelDraw x4, and a Dell 968 printer.
why it won't print the item 2" tall?
What is the correct way to print a 16" x 20" print on 17" x 22" paper using LR5.
In LR4, using 17" x 22" paper, I used to set the cell size to 16" x 20" and print. Doing the same thing in LR5 gives me a slightly larger print.
Microsoft OLE doesn't seem to work flawlessly in CorelDRAW:
Create a new CorelDRAW file
Select menu item "Edit > Insert New Object ..."
Select "Microsoft Excel Worksheet" from the dialog box. This creates an Excel Worksheet within the CorelDRAW file.
Edit the Excel Worksheet to contain some text in the Worksheet's cells.
Alter the font for some of the cells.
Select menu item "File > Publish to PDF ..."
You will notice that in the PDF file the text is all rubbish:
I have added a CorelDRAW X6 file to this post. Unfortunately this forum doesn't allow for file attachments being bigger than 256k. So I had to upload the CorelDRAW file as an "image" by renaming its file extension. ... Please right-click on above image to download the CorelDRAW file and delete the ".png" file extension from the name in order to download the CorelDRAW file correctly. The correct file name should be "CorelExcelImport.cdr" on your hard disk.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
what version on dxf/ dwg does X4 read and output? I have ver 12 and am thinking about upgrading to latest, but still working through the changes.
View 7 Replies View RelatedI'm trying to output B&W art for offset and can't get a .tif, .pdf, or .eps to look as good as the Draw version. Even ran the .tif up to 2400 resolution, making for a 160+MB file; not bad, but still rough by comparison.
Then I turned View/Enhanced to View/Normal: they look the same now. Is Draw, when View is set to Enhanced, smoothing out my artwork in a way that can never be reproduced in real life? Would explain why my printer is always letting me down.
I get the "Out of Memory" error when I'm trying to collect for output, tired re installing but the same erorr continues
View 5 Replies View RelatedIt looks as if custom spot colours created in X6.3 are not being correctly named in exported EPS or when pubishing to PDF.
Example:
I create a new, blank palette in My Palettes. I add a colour named with a screen colour of C=10 M=20 Y=30 K=40 and save it. I cannot name it at this stage (typing anything in the name box changes the CMYK value) so I leave it blank for the moment I mark it to be treated as a spot colour and change the name to NondescriptBrown
Next I create a document with one object, and I assign 100% NondescriptBrown outline to it. Good so far -- it shows correctly as 100% NondescriptBrown on the status line.
Export to EPS without a preview image -- making sure convert spot colours is off.
Open the EPS file in a text editor and look at the line: %%DocumentCustomColors: (C10 M20 Y30 K40)
That's right, the export has named the colour C10 M20 Y30 Y40 and searching confirms that the correct name NondescriptBrown does not appear anywhere in the EPS.
Looking at the palette's XML file I see:
So, it seems that X6.3 should be looking up the proper name in colors>page>color.name and using that for the export, but is instead exporting with the internal colorspaces>cs.name which is a purely arbitrary name that is not for external use.
I can fix the problem by manually editing the XML file by changing colorspaces>cs.name and colors.page.cs both to NondescriptBrown, so that the internal name is already the same as the correct export name, but clearly that should not be necessary -- and if CorelDraw can display the correct name on screen in the status line, it ought to be able to export it correctly too.
Exactly the same applies when publishing to PDF, but is harder to prove, because its compression renders the file unreadable in a text editor.
I was given a CMYK TIF file that has two added spot color channels. CMYK channels are empty. Bringin this into Draw X6 64 bit shows nothing but a white box and when attempting to print separations the print dialog says "nothing selected to print." So I opened the file in Photoshop, deleted the CMY&K channels, saved it as a PSD and imported to Draw which labels it as a Bitmap (Multichannel DeviceN). The two spot colors appear in the document color palette and it displays and appears to separate properly in the print preview.
View 2 Replies View Related
