I have a file with multiple externally-linked bitmaps. When I chose "Collect for Output" and check "Automatically gather all files associated with this document", it is not including those bitmaps. I had no problems with X3 or X4 with the same sorts of files.
View 14 RepliesI use "Collect Files" all the time. I collaborate with other people and this function is obviously vital.I'm currently having an issue with it collecting comps that are not selected. I choose "For Selected Comps" and I check off "Reduce Project." The new file has the comp I want, but also others. And if I try another comp, it will collect the same additional ones each time. And In the generated report, it is listing the comps I don't want as collected.
It seems to be specific though, collecting comps that are from other .aep files that I've imported. And only comps from .aep files that where generated with Collect Files. In other words, basically anything I've round-tripped using Collect Files and imported after a collaborator has finished their work.
I'm using AE 12.0.0.404 and I'm on OSX 10.8.4.
I get the "Out of Memory" error when I'm trying to collect for output, tired re installing but the same erorr continues
View 5 Replies View RelatedWhen this bug is going to be repaired?
CorelDRAW X6
I modified the "Prepress" pdf preset to show crop marks and saved this pdf preset as "Cropmarks". However when I use the "Collect for Output" wizard, the new pdf preset (i.e. "Cropmarks") does not show up as an option in the dropdown.
Is there a way to make it available/show up in the "Collect for Output" wizard?
The code works to collect fonts in an open Illustrator document. The issue I am having is that it only collects one font. Or sometimes it will collect a whole font family. But I haven't been able to get it to collect all of the fonts in the document.
function getUsedFonts (doc){
var xmlString = new XML(doc.XMPString),
fontFamily = xmlString.descendants("stFnt:fontFamily"),
fontFace = xmlString.descendants("stFnt:fontFace"),
ln = fontFace.length(), i = 0, arr = [];
[Code] ......
What is the easiest way to package or collect font (to send out for printing artwork) in Illustrator Cs6?
View 3 Replies View RelatedI want to bring into one new blank project about 12 images, resize them, mess about with them, reposition them etc...easy enough...BUT im stuck as stage one. I cant seem to simply bring in more than 1 image..next image appears on a new sheet...Clearly im using the wrong method...
Open new project, decide on size of project/paper. Then i click on....what....to bring in a photo....and then...to bring in another photo etc..
I created a smart collection with only one rule - Keywords/Contains/'Landscape' - but many other images that do not contain that keyword appear in the collection. It doesn't happen with any other keyword as far as I know. I tried re-creating the collection, re-keywording my images, etc. but with no success.
View 2 Replies View RelatedI have never had to add crop marks to a file for printing. I output to a PDF at full bleed and it gets cut. Period.
Now, on a new project, it has to have the crop marks. Problem is, When I add those, I get marks like the black lines shown in each corner here. Obviously, this is NOT the cut line. The cutline should be more like the ones I have added after the fact in green.
How do I make the marks show up further in to the document (like th green lines) versus showing up at the full bleed's edge?
I was using CarelDraw 12 and had an output problen when I purchased a new printer (HP Laserjet 1525) The page is set for portrait, 8 1/2 x 11, as it always has been, the printer prints the top half OK, but shoves the bottom half of the document up so that the final copy printed is 8 1/2 x 8 1/2? I have downloaded a trial version of X5 and it does the same thing so I am assuming it is a printer/driver issue?
View 2 Replies View RelatedI have produced some artwork for my the printers in X5 Corel.
The artwork includes two fills using radial fill with two grey colours from the Corel CMYK metalic palette to produce a simulation of a metal finish.
If I output as JPG the moirè is eliminated but as a PDF, even with complex fills going to BITmaps I end-up with the moirè.
This is the output as a JPEG:
and this is the PDF:
Microsoft OLE doesn't seem to work flawlessly in CorelDRAW:
Create a new CorelDRAW file
Select menu item "Edit > Insert New Object ..."
Select "Microsoft Excel Worksheet" from the dialog box. This creates an Excel Worksheet within the CorelDRAW file.
Edit the Excel Worksheet to contain some text in the Worksheet's cells.
Alter the font for some of the cells.
Select menu item "File > Publish to PDF ..."
You will notice that in the PDF file the text is all rubbish:
I have added a CorelDRAW X6 file to this post. Unfortunately this forum doesn't allow for file attachments being bigger than 256k. So I had to upload the CorelDRAW file as an "image" by renaming its file extension. ... Please right-click on above image to download the CorelDRAW file and delete the ".png" file extension from the name in order to download the CorelDRAW file correctly. The correct file name should be "CorelExcelImport.cdr" on your hard disk.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
what version on dxf/ dwg does X4 read and output? I have ver 12 and am thinking about upgrading to latest, but still working through the changes.
View 7 Replies View RelatedI'm trying to output B&W art for offset and can't get a .tif, .pdf, or .eps to look as good as the Draw version. Even ran the .tif up to 2400 resolution, making for a 160+MB file; not bad, but still rough by comparison.
Then I turned View/Enhanced to View/Normal: they look the same now. Is Draw, when View is set to Enhanced, smoothing out my artwork in a way that can never be reproduced in real life? Would explain why my printer is always letting me down.
I have to collect all the Dimension arrowheads(usually close filled type) present in the modelspace ,and change the type to DOT.. Im using COM APi.
View 1 Replies View RelatedIt looks as if custom spot colours created in X6.3 are not being correctly named in exported EPS or when pubishing to PDF.
Example:
I create a new, blank palette in My Palettes. I add a colour named with a screen colour of C=10 M=20 Y=30 K=40 and save it. I cannot name it at this stage (typing anything in the name box changes the CMYK value) so I leave it blank for the moment I mark it to be treated as a spot colour and change the name to NondescriptBrown
Next I create a document with one object, and I assign 100% NondescriptBrown outline to it. Good so far -- it shows correctly as 100% NondescriptBrown on the status line.
Export to EPS without a preview image -- making sure convert spot colours is off.
Open the EPS file in a text editor and look at the line: %%DocumentCustomColors: (C10 M20 Y30 K40)
That's right, the export has named the colour C10 M20 Y30 Y40 and searching confirms that the correct name NondescriptBrown does not appear anywhere in the EPS.
Looking at the palette's XML file I see:
So, it seems that X6.3 should be looking up the proper name in colors>page>color.name and using that for the export, but is instead exporting with the internal colorspaces>cs.name which is a purely arbitrary name that is not for external use.
I can fix the problem by manually editing the XML file by changing colorspaces>cs.name and colors.page.cs both to NondescriptBrown, so that the internal name is already the same as the correct export name, but clearly that should not be necessary -- and if CorelDraw can display the correct name on screen in the status line, it ought to be able to export it correctly too.
Exactly the same applies when publishing to PDF, but is harder to prove, because its compression renders the file unreadable in a text editor.
I was given a CMYK TIF file that has two added spot color channels. CMYK channels are empty. Bringin this into Draw X6 64 bit shows nothing but a white box and when attempting to print separations the print dialog says "nothing selected to print." So I opened the file in Photoshop, deleted the CMY&K channels, saved it as a PSD and imported to Draw which labels it as a Bitmap (Multichannel DeviceN). The two spot colors appear in the document color palette and it displays and appears to separate properly in the print preview.
View 2 Replies View RelatedI am using Coreldraw X5 (Version 15.2.0.686). I have a piece of document that I would want to convert to flash and put into the website.
Can't I make it to display but cannot print and cannot be altered? How come flash can print now?
I have noticed that when i make changes to line widths in a drawing using the outline pen, the printed output does not change until i make at least a change of .005". changing it by less than this only changes it on the display.
View 2 Replies View RelatedI just printed of the design for my first t-shirt. There are faint horizontal lines, about 1/2 inch apart, thru an ellipse with a green-blue fountain fill that are not part of the design. Is this my printer, or is there something in the program that I am (not?) doing?
View 6 Replies View RelatedThe code below collects empty blocks with the intent to delete them.However, it appears that if an Xref is currently 'unloaded' it apparrently collects that too. I could probably just test to see if the block is an Xref and avoid it... but how could I modify this to check if it is loaded and still empty?
(defun NullBlocks (/ block *thisdwg* block nullblocks)
(setq *thisdwg* (vla-get-activedocument (vlax-get-acad-object)))
(vlax-for block (vla-get-blocks *thisdwg*) ;iterate block table
(vla-get-Name block)
(if (= 0 (vla-get-count block))
(setq nullblocks (cons (vla-get-name block) nullblocks))
)
)
nullblocks
)
I have a LISP that use the XATTCH command. How can I collect xrefs inserted by XATTACH? It can be more than one xref.
View 9 Replies View RelatedWhen i take bw laser print from corel draw, the output is not pure black. I tried using the the 'Preserve Pure Black' setting in corel draw. But it turns out to have some adverse effect while converting image from one format to the other (like rgb to cmyk) bitmaps, the black shade on the image looked washed out in multicolor offset print.
what should i do now to get pure black output from bw laser printer without using the preserve pure black setting.
printer : hp 1020
operating system : windows 7
corel draw version : x5
I have recently traced a new picture and I am about to add colors to it so that I can upload it later on my gallery. I started the Tracing on a Cmyk based template because one day I will use print it to add it to my portfolio! I mean should I add Cmyk colors and them convert them to rgb in order to upload it?
View 7 Replies View RelatedI am a relatively new user of Corel Draw. When using the variable data print feature, the images seen in the print preview look correct, but when the page is printed the same data is output in all 4 images. This does not happen every time. I suspect there is something going wrong with the print merge data buffer. I have not been able to reproduce the error. I have created a detailed script to for others to follow when running this job.
View 7 Replies View RelatedI am going to collect objectid's of the moved items in drawing after they moved to destination. So I wrote an event to monitor move command , by using object modified event handler. when I run below code for every entity it collects 2 object id. One before move and one after move. Is there any way to just collect object ids after they moved?
Class EVENTS
Dim MyDwg As Document = Application.DocumentManager.MdiActiveDocument
Dim Myed As Editor = MyDwg.Editor
Dim Mydb As Database = MyDwg.Database
Dim Myobjidcoll As ObjectIdCollection
[Code]....
New to CDR X6 just having upgraded from CDR 8.
Printing a black and white layout to my HP LaserJet 4000 produces an image that appears to be grayscale instead of solid black. In other words, my text, line border I've put around the layout and graphics (for the most part), all appear about 70-80% black instead of SOLID black. Small text doesn't appear to be nearly as sharp because it looks like a halftone instead solid black. On one layout I just printed, the entire thing appears halftoned except for one vector graphic that did print in solid black. Strange. I figured I have something set incorrectly in the software or printer. Has to be the CDR X6 software though because all other programs output just fine.
In one of my print job there is a Box with Fountain fill from blue to gray colour in conical form and also have a power clip contents.
In the first lot we had got no problem in getting correct image reproduction as per our original file thought an EPS.
But later on in second lot after some amendments to this drawing file which later exported to an EPS for CtP service bureau we had got problem in vignette / conical fountain production in grays at its peak tone. There is one conical fountain step is missing leaving the background in up front. It ruined up the whole 2nd print lot. The CtP provider didn't responded properly in this regard.
As we are assured of our testing through importing the EPS to CorelDraw, we changed the CtP service provider in the next lot to avoid any unknown RIP issues. But through CtP plates we have faced the similar problem as seen in the second lot and the job has also been printed which means we have got ruined the 3rd lot completely.
We have also supplied the JPG image preview file to facilitate the CtP service bureau, along with the EPS. They replied the problem is neither easily visible on the RIP preview nor the EPS file shown any issues.
CorelDrawx5 v15.2.0.686 ; File last saved by: CorelDraw 12 (pc) build 661
OS: WindowsXP Professional 64bit Ed; v5.2.3790; SP2 build3790; PC Details : Intel Q6600 @2.4GHz, MBD DG33FB, 8GB RAM.
Imposition software: Impose Harry; CtP RIP details : eXpress RIP v8.1
I have saved a file in corel. on the second day, when i want to open the file,is writting: "File Copy Error" TEMP Drive or Output Drive may be Full" Is there any posibility to recover the file. The recovery toolbox can not recover the file.
View 14 Replies View RelatedWhen printing a image in halftone from Corel x5. The image looks great in print preview but if I try printing it prints a solid black page.
View 7 Replies View Related