With Mac OS10.6.8, Photoshop CS4, and Epson 2880, the correct media profile is not available in the print dialogue box. I have matte black ink installed in the printer, but get only glossy paper options available for media type in the print dialogue.
View 2 Replies
LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why? The printer is an Epson 4900.
View 5 Replies View RelatedWhen printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
I exported my images in the correct color space to a media company and the image color and quality are terrible.
View 2 Replies View RelatedPhotoshop 11 quis when I try to choose a media type from priner settings on my new macbook pro. I am using an Epson RU2000 printer, and do not have this problem on my old macbook pro.
View 7 Replies View RelatedNote that the Illustrator, Indesign and Acrobat print dialogues see all my (custom) printer profiles.
Even Photoshop sees them in the Apply Profile and Convert to Profile dialogues: just not when trying to print.
The soft-proof of an image in CS6 gives a very good rendering based on a given paper profile for my printer. However subsequently, with proper settings in the Print Settings dialogue box, the image represented often has colors that are far from the earlier soft-proof rendering and are thoroughly inaccurate.
The image prints correctly, having no resemblance to the image appearing in the dialogue box, but coming quite close to the soft-proof simulation. Is something amiss? On a system running Mac OS 10.8.
Using photoshop elements 9, the print driver printer settings are not allowing me to choose a drop-down option for page set-up "sheet" or "media type". This is where I should be able to choose "cassette", but it's only showing me a blank drop down. I tried Espon help. I tried Adobe chat. Using a MacBook Pro 10.6.8. Just getting to the "printer settings" is buggy too, as it won't go to it until I've chosen another option, e.g. "Roll Paper Settings" first.
View 4 Replies View RelatedI am unable to post any type of media as well as profile photo.Either the site is offline or an unhandled error occurred.
View 4 Replies View RelatedCan you print 7x5 from the 8x6 print media
View 3 Replies View RelatedWhen importing media from my iphone I'd like to ONLY import jpgs, not the mov files. In searching, the sort option in the import dialog on "media type" should work so I can easily just select new jpg files, however this does nothing for me. Is this supposed to work? I'm running OSX 10.7.2 and LR 3.6.
View 12 Replies View RelatedWhen I check "Scale to Fit Media" in my print options what exactly is going on? Does it get resampled? Does the resolution change? And what is the difference between using this option and setting my document size in the "Image Size" dialog box?
View 6 Replies View RelatedThe placement dialogue for printing which used to be in inches is now in mm and there seems to be no way of changing it back to inches.
View 2 Replies View RelatedIs there a way to setup Photoshop CS6 print settings so that "Scale To Fit Media" is the default. I tried to create an action and then through Bridge select a folder and Batch send the files to Open-Print-Close. Since images are never received 8.5"x11" it would be convenient to have this as a default. Since the print settings revert, or aren't defaulting to "settings last used", my batch attempt was unsuccessful. I know I could edit my action to adjust image size to page dimensions, but thought a way to edit the Print settings default must be out there somewhere. (Using MacBook Pro OSX 10.8.4)
View 1 Replies View RelatedI am editing and saving pictures from a original size from the camera width 2623 pixel( 8.73in) X 4166 pixel(13.887in). I need to make prints as 5x7in and 4x6in. It seems that no matter how I size them in adobe CS6 they will not print in correct size at either URL.... which I use for prints. I also have pictures from my new camera, canon 7d and it's picture size is 3456 poixel(48in) X 5184 pixel(72in) , also can't get these sized correctly.
View 3 Replies View RelatedI Use Macbook Pro OSX 10.8.2
Lightoom 4
Canon Pixma MG 8250
Profile MG series 8200 GL3/SG3 for Glossy paper.
It is stated that "remember to turn off color management in the print dialog" when using custom profile (I assume the Profile MG...) is regarded as a custom profile...
I have been lookoing in the print dialogue and I can not find any way to turn off colour management... Is this only valid for Microsoft Windows of Is there something I do not understand ?
how to tell photoshop what measurements my image are. But how do I ensure that these measurements will be used when printing?
HOw can I know ahead of time that a certain portion of my image will print.
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
Size of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies View RelatedI was using CarelDraw 12 and had an output problen when I purchased a new printer (HP Laserjet 1525) The page is set for portrait, 8 1/2 x 11, as it always has been, the printer prints the top half OK, but shoves the bottom half of the document up so that the final copy printed is 8 1/2 x 8 1/2? I have downloaded a trial version of X5 and it does the same thing so I am assuming it is a printer/driver issue?
View 2 Replies View Related[URL]
The 8x12 pixel size is 768x1152 and the 8x6 pixel size is 768x576. As to the need of being 11.5 I knew that, but I had this plan to work larger in order to downsize it and not lose any detail of clarity. If I'm understanding some of the other things I read you get a 100 pix per inch, but paint.nets is 96 per inch?
But let me throw a couple more things at you as well. I've made some scrapbook pages in what I had hoped were 10x13's to be printed out for framing...however, when taken to the Walmart printer it cuts off half of one side like the pic is too big..this is even when going for a 11x14 and larger size. I resized them, still cuts them off. Yet I make a 6x4 canvas and try to use it for my desktop background and it's too big for it in the "fill screen" mode, not mention the distortion.
Is there just a simple, cut and dried formula for image, canvas size that will come out the print dimensions I need? I'm sure I'm missing something basic, but my mind only works in basic mode!!
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
I get this prompt while copying sequences between projects with gateway-linked footage, and I'm not sure what it means.
---------------------------------------------------------------------
CLIP MGT: Unmanaged media contained in selection. Store media on Wire?
---------------------------------------------------------------------
Is it asking me if I want to store a local copy or stonifize the media?
where when I try to export my video, I get a pop up window saying 'some media is offline, it will be rendered using the red media offline graphic'. in Premier pro all my media seems to be online, I have followed several different video tutorials on how to re-link media and the option to re-link media is greyed out for me as there is no media that is unlinked, so why does this message come up when trying to export? Playback in PP is fine, all media appears to be online.
Having viewed the exported video it seems that all the media which has been replaced by the red 'media offline' logo is all the .MTS files filmed on my Camcorder whereas all the GoPro footage is showing up correctly in the exported video.
What is the correct way to print a 16" x 20" print on 17" x 22" paper using LR5.
In LR4, using 17" x 22" paper, I used to set the cell size to 16" x 20" and print. Doing the same thing in LR5 gives me a slightly larger print.
I am having trouble with .emf files. My boss has created schematics in Microsoft Visio and converted them to .emf images so that I can insert them into AutoCAD and create various drawings. However I have tried a couple of different ways of importing the images into CAD (copy paste, drag'n'drop etc..) and they all seem to work fine but when I print the drawing or close it and re-open it, the schematic .emf image disappears completely.
View 2 Replies View RelatedI'm doing some building drawings for Uni using AutoCAD 2010 and what is the best way (and process) to set line weights and types (dash, dot) for printing. What I’m currently doing doesn’t seem to be working and seems a bit inefficient.
The way I am doing it at the moment is that I have put all the various drawing elements on different layers with varying colours. I am then going through each layer in the layers dialog box and setting the line weight and line type as required.When in paper space or plotted the lines all come out solid/continuous and with same weight. (Note: I have used LTSCALE so that the dashes are viewable in model space). So here are the questions: Does the line weight and line type you set in the layer properties equal what should be printed? At the moment it does not for me. It is best to create all your layers and individually edit each layer for line weight and type, or is there a quicker way to assign line properties? I think I read that you could assign different properties to colours, but not sure what this means.
I want to print a type specimen covering a page of paper and have illustrator generate it for me while I only have to pick the type font. How is this possible?
View 3 Replies View RelatedBy default, the PDF print drivers we use (Bluebeam, PDF 995) set True Type text handling to be "as graphics" rather than "as text" (see below), which makes for some ugly text. I know I can make this change and save as a .PC3 file, but all our page setups for sheets & templates in the office all reference these default drivers, so it would be preferable to change the way the default driver works if possible. Is the default plotter configuration editable?
View 3 Replies View RelatedHere's the text:
1. Should Media Cache Files and Media Cache Database be in separate folders? Does it matter?
2. Can I open an "in progress' project from P Pro CS4 with CC P Pro and continue editing?
