Premiere Pro :: Export Settings For DVD?
Feb 21, 2014
I just finished editing a 67 minute documentary, and I'm preparing to send it to the replication company. The problem I'm running into is that the project looks very clear and clean in premiere pro, however as soon as I export and burn it to a disc via encore, the finished video is noticibly pixelated/grainy, and a lower quality.
The footage was shot in HD. I've tried exporting MPEG-DVD and MPEG so far. The MPEG-DVD setting was worse than MPEG, but that wasn't great.
Is there anything I can try to get this footage to look better? (It's due at the replication company on Tuesday.)
View 5 Replies
ADVERTISEMENT
Dec 8, 2013
I've recently come across from FCP to Premiere Pro CS6. I've also acquired a Canon XF100 camera (the output being MXF files) and have been shooting some HD test footage which is 1920x1080. However, the project I will be shooting needs to be exported as a PAL SD .MOV file, as it is to be used for broadcast by a non-HD community station.
I have tried many different sequence and export settings to create the SD .MOV file, but in nearly all of them I keep getting blurring lines across the screen. I am now not sure if I should be shooting in SD or HD... I thought that I could shoot in HD for a better image before rendering out a SD final export.(I used to do this in FCP)
View 4 Replies
View Related
Jan 12, 2014
it is possible to render to mpeg 2 with specific settings for VOD content cable provider in Premiere Pro?
Is there a specific preset for it? Or do you really need an external plugin (like the very expensive QT plugin from PIXELtools?
For a cable provider I need to make SD content.Encoded some MPG 2 TS test files and uploaded them to the test-environment of the Cable provider.
The calbel provider said the files are almost approved, they need a little more tweaking.
But the cable provider only gives me a list of errors in return. Errors they see in in the testing environment before publishing.
1. Rendered MPG's have PCR errors (deviation in clock frequention)
2. to get better quality encoded MPG's, they say to stretch the GOP.
Since I'm not in to GOP's, M frames and I-pictures.They gave me a white paper with the following rules....
1. The first byte of the video elementary stream MUST be the first byte of a sequence_start_code.
2. The video elementary stream MUST contain an integral number of access units.
3. A Sequence Header and a Sequence Extension MUST precede each I-Picture.
4. All B-Pictures in the video bit stream MUST use prediction based on pictures present in the bit stream. Specifically, the first GOP in the video elementary stream MUST NOT begin with a B-Picture predicted from a reference picture that does not exist in the stream. That is, the first GOP MUST be closed.
5. For MPEG2 encoding, the length of each GOP SHOULD be 12 frames.
6. For MPEG2 encoding, the number of consecutive B-Pictures between anchor pictures (I-Picture or P-Picture) MUST be two or less.
how to set the above requested into the Premiere Pro exportsettings from below (my settings, to make an MPG
View 3 Replies
View Related
Apr 3, 2014
When I use export media in Pr CS6 and use custom settings (H.264) and click Queue when it arrives in Media Encoder none of the custom settings are there, instead it always defaults to .F4V.
View 3 Replies
View Related
Feb 6, 2014
Using CS6 Premiere Pro in Windows with the intent of making a DVD of the movie,how do I choose the Preset descriptions in the "New Sequence" screen? I assume I'm going to choose an AVCHD version, but don't have any idea what the differences are.
View 2 Replies
View Related
Jan 6, 2014
i am editing for a film in 2k with priemere pro,which 2k size is correct to use for films, - 2k 16x9 24 (2048x1152) or 2k 2x1 24 (2048x1024),
View 6 Replies
View Related
Jan 7, 2014
I have a video shot on a webcam on 720 resolution and 15 frames per second. When I import it into premier I can't find a 720 setting at 15 frames.
View 10 Replies
View Related
Oct 28, 2013
So, my company made the leap to CC last month and we've been enjoying the benefits of frequent support updates and all the new tools, etc.
But now I'm experiencing an error when attempting to sync with CC from Adobe Premiere Pro. Every time I tell Premiere to 'Sync Now', from any machine I get the popup message: "Syncing Settings Failed"
The software notes that the last successful sync was on the day I installed & ran the software for the first time. I'm logged into my Creative Cloud account, and logged into Adobe Premiere Pro ..
View 11 Replies
View Related
Feb 3, 2014
I have a black magic and have problems setting the sound properly in PR to get the sound out through the black magic. Although settings seem to have been done properly, there is no sound coming out. When I start the setting again, most of the time the settings have automatically changed and are not on the black magic anymore.
View 1 Replies
View Related
Jan 5, 2014
i am starting a film project to edit, what is the exact 2k project sequence settings & project settings,like frame rate,2k resolution size,progressive or ?the project pipeline is - premiere to speedgrade to Lab print(Negative or UFO or Qube)
View 1 Replies
View Related
Mar 5, 2014
I'm using a Blackmagic Intensity Pro with Premiere Pro. I don't Import anything with it directly, i just use it to preview my timeline on a seperate monitor.
The issue I have is when I try to import a AVI-file to my project.before I had the Intensity Pro, Premiere would input the file as a Microsoft AVI and it worked perfectly. But now the exact same file is imported as a Blackmagic AVI-file. now I am experiencing green bars in my video and the color information is totally screwed up.
So my question is: can I deactivate or change the Import-settings of Premiere, without to remove the Card completely (turn PC off, remove card, turn back on...)?
View 6 Replies
View Related
Jan 27, 2014
I am working with MTS files (AVCHD, 1920x1080, interlaced, 25 fps) in Premiere CS 6, Windows, and want to render my project with the same properties as h.264.
[URL]
A common misconception is that CUDA/OpenCL processing is only used for rendering for previews. That is not true. CUDA/OpenCL processing can be used for rendering for final output, too.
But where/what are the options/settings to use CUDA not only for preview purposes, but for accelerating the rendering of the final output, too?
View 4 Replies
View Related
Apr 4, 2014
1) The keyboard shortcuts panel won't open so I can't change them.
2) My settings refuse to upload to CC no matter what I do. I've tried deleting the stored settings from my CC account. I've tried signing out of CC via the help menu in PP and then signing back in again. I've tried clening the media cache. Restarting/rebooting/opening new project etc etc.. all steps suggested in other posts but nopthing seems to work.
View 2 Replies
View Related
Feb 26, 2014
I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.
View 1 Replies
View Related
Dec 28, 2013
I'm trying to export a video sized at 3840 x 800. My source video is 4000 x 2250 GoPro time lapse photos transcoded to MP4 or avi.
How do i go about doing this?
Using: CS6 and GoPro Studio for transcoding
View 4 Replies
View Related
Feb 11, 2014
So I got a new mac and since I have not been able to export anything. I've reinstalled everything, updated it and fenagled with all the settings but nothing seems to stop it. I am using the latest verton of Mavericks and it only happens when I hit export to media.I also checked adobe media encoder and that gets the same error message and cause.
View 9 Replies
View Related
Dec 12, 2013
I'm trying to export a sequence as XML, but no matter what I try, it exports the wrong sequence. I've tried selecting the sequence in the project panel, then hitting export, and I've also tried opening the timeline and exporting from there.
The sequence being exported is actually used at one point in the sequence I want to export, otherwise I would just delete it temporarily. I'm using Premiere CC 7.2.
View 6 Replies
View Related
Mar 23, 2014
I am trying to export a 15 minute film, with a LOT of audio clips to OMF for ProTools. The exporting "hangs" during the process when it encounters a certain file-name. The filename is gibberish, so I have not the slightest idea, which file it is, or where on the timeline I could look for it.
Another problem seem to be nested audio sequences can't be exported. Am I correct in assuming that I will have to replace every single clip by hand?
(Why is there no Python interface for Premiere... life would be SO much easier )
I've read through some of the threads concerning OMF: If I understand it correctly, OMF export is really buggy/limited in PPro CC for a fast workflow with a ProTools site?
View 1 Replies
View Related
Jan 29, 2014
How do I export an animated GIF from Premiere CC?
I dont see an Animated codec option
View 8 Replies
View Related
Feb 28, 2014
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC.I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
View 1 Replies
View Related
Dec 10, 2013
I just finnished editing a music video.
It has over 8 video tracks and now I want to export it to a EDL format but It looks like everything needs to go on 1 video track.
View 1 Replies
View Related
Mar 15, 2014
I am encountering with premiere pro and my new MAC...it overheats the MAC PRO and freezes during export...a simple 3 min timeline with no plugins, just using plain 4k RED RAW...it has to be super cold the computer to boot and render and will go through...I just keep getting frustrating more and more with the problems Premiere CC has with the new Mac Pro...
View 7 Replies
View Related
Feb 13, 2014
It's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips.
View 3 Replies
View Related
Mar 14, 2014
I have a timeline of about 40 minutes long with several audio tracks and sounds, some mp3 from you tube and some recorded on the shooting day. everything sound just fine in premiere, I even exported one part of the timeline as a seperate movie and it was o.k. the problem is when I've import the hole track some of the audio tracks were missing/silent. it happend in 2 different projects.
I'm on windows 7 premiere cc update to latest version...
View 4 Replies
View Related
Jan 24, 2014
I'm having a major issue exporting a sequence out of premier pro CS5 that contains high res jpeg images. The system freezes up during the export. I've been successful exporting the sequence to H.264 (vimeo HD preset) after removing the jpeg. So, I am fairly confident it I've isolated the issue. However, I've gone over the recommended jpeg file sizes for premier pro and am well within the guidelines. The images I'm using are saved at a resolution of 300dpi with a size of about 5600 (w) x 3700 (h) pixels for an average of about 61 megapixels per image. The sequence plays just fine within premier pro. There is only a problem when I go to export.
View 2 Replies
View Related
Jan 8, 2014
I want to export a spot i made in premiere but i can't see the mxf op1a in the export list. What should i do??
View 5 Replies
View Related
Jan 30, 2014
I am trying to export a video I have created, so that I can put it on youtube. The problem is, whenever I export it, it exports the voice over, but not the background music.
View 3 Replies
View Related
Jan 22, 2014
I'm primarily an Avid user but am learning Premiere Pro from scratch. Is it possible to export a QT reference file from Premiere? And if not is there an equivilent in the Adobe world?
View 2 Replies
View Related
Jun 30, 2013
I just started testing the new premiere CC as a replacement for the Pro5.5.
Most of my clips are AVCHD from the dreadful Panasonic 130 / 160 cams.
Although the new premiere works well as far as handling these clips (surely better then CS6 with the BUG) , when I try to export to mpg2 DVD … well …. Trees grow faster.
For some reason the premiere cs5.5 does it faster, way faster than the CC. The CUDA engine is active in both cases, but has no visible effect on speed. The computer I am using has the I7 6 cores dual threads, 32 GB memory, SSD for system disk and GTX570 for GPU
View 28 Replies
View Related
Mar 17, 2014
My specs are
CPU: i7 4820k 4.4ghz
GPU: 4gb radeon r9 290 200 series
RAM: 16gb 2400MHZ
SSD: ASUS writes at 840/mbs
OS: Windows 8.1 64 bit
Using CS6
Taking like 15 mins to export a 374mb video
View 24 Replies
View Related
Feb 9, 2014
I'm trying to export a video as MP4, 1280x720 but when I attempt to adjust the frame height/width to this, I get a message that says "Frame dimension not supported: Please check that both width/height values are within limits." Aspect ratio is 16:9 and frame rate is is 60. When I export it as AVI, I don't get this same problem, but the file is HUGE so I'm trying to export as MP4. Also the filepath for MP4 comes up as .gp.
View 3 Replies
View Related
