Photoshop :: Whats Wrong With Ps 7 Guides
Apr 10, 2004
i have recently switched to ps 7 and i find myself wanting to go back to my 5.5
what is wrong with the guides in there? when using the snap to guide, and i select something within the guides, the stupid selection sometimes falls short or too big by 1 pixel. this renders the whole purpose of the guides useless.
i also find that its much harder to set the guides to match up. i set them, sometimes even zoomed in at 200-300% and when i zoom in more 1600% i find the guide not quite where its supose to be.
i didnt have any of these problems with my previous version. i looked around in the options and couldnt figure anything to make it better.
View 2 Replies
ADVERTISEMENT
Feb 13, 2008
I have a number of vertical and horizontal guides to be placed, at different points. Is there a better way of placement rather than zooming up on the ruler area, watching the Nav coordinates and dragging and dropping? I'm really looking for a method which will I can key in the actual placement coordinates in some way, and the guide will jump to this point?
View 6 Replies
View Related
May 27, 2013
What I mean:
Draw an ellipse. Skew it with mouse.
Draw a rectangle to allign with ellipse's outer dimension by Alignment Guides (not by Align and Distribute command).
Now the aligned side of the Rectangle must be tangent to the ellipse BUT it's not! To verify, try to search an intersection point. Draw a Guideline and snap it to the rectangle's aligned side. It must be intersection point between Guideline and Ellipse but there isn't...
CorelDRAW X6
View 8 Replies
View Related
Feb 11, 2008
Whats the use of adobe illustrator?
Are there things that it can do, that adobe photoshop could not?
View 2 Replies
View Related
Mar 22, 2008
I thought I'd create this thread so people can share what fonts they like and use. Hopefully we can build up a good collection.
View 5 Replies
View Related
Aug 6, 2006
I always have trouble taking a small image and making it larger because it always gets blurry and pixelated. Does anybody have any suggestions on how to make the image (whether it be a logo etc) larger without making it pixelated?
View 2 Replies
View Related
Jul 30, 2004
photoshop/ImageReady, then Lightwave, Director, Flash, etc... that it's been a while since I've installed a button onto a web page.
I've looked high and low for a tutorial that will show me how to do that, but they're all just showing how to make buttons, (gel, liquid, glass, metal, plastic etc...)
What I need to know is what do I do with the button after it's made. :]
IE:
I have a folder with "Pg_1" and "Pg_2", and I have this button I just made in ImageReady, and the rollover, and the down positions work well when tested. Now how do I get it onto "Pg_1" on the righthand side, and then have it take me to "Pg_2". What parts of the Javascript to I copy and paste into the header? etc...
I already have a webiste up, and all I have on it are "text links" because I can't get all these great buttons I've made onto it. How do I do that?
View 1 Replies
View Related
Jul 11, 2008
Well in any other program I've used if i create a selection with the selection tool and fill it, it fills just the selected area, when I click now it fills the selection and thers like a huge AA or feather around it, I turned both off and it's still there, how can I make it just fill the selection? Below is an example of what's happening now.
View 1 Replies
View Related
May 23, 2007
I am making some foreward and back arrow buttons. Could you suggest a good size for me to set them up in Photoshop for them ? ie the image size.
View 6 Replies
View Related
Apr 20, 2004
I am making it for my clan for UT2004. Whats a eneral rule of thumb for quailty vs size of file? Not all of us have 100kbs+ connections, so I have to set a limit I guess for you 56ker. So... please take a look at what the site involves.
I currently have the quailty set to MAX. (Note: that im not done editing the interface... gotta edit the WELCOME and MENU lables so they match the big banner on top.) Also.... I just can't figure this out... take a look really closly at the bottom banner and the image under the iframes text and under the navagation.
It doesnt look right does it? The color isnt 100% gray... it seems to trail off to a darker grey or black... yet when I open it in Photoshop it shows that its all gray. Why does it do that and how can I fix it? Also: I dont have the photoshop file for the the MENU and WELCOME image... So how can I recreate the rounded off rectangle? So it has that shadow like appearace?
View 9 Replies
View Related
Aug 14, 2006
What is the best choice to use when applying the sharping tool. I was told unsharp mask - but what does this do? also is there anyway to reduce motion blur in a jpg pic?
View 7 Replies
View Related
Feb 17, 2013
last couple of documents I've been working on,I've been needing horizontal and vertical guides (no problem) but why is it when i close the file (saved all work) when I open the file to continue the guides have to be redone. Isn't there a save guides option in CS6
View 4 Replies
View Related
May 14, 2006
Is there any way to paste guides, or, putting it another way, can I take an image, add guides, erase the image, keep the guides and paste in another image? Everytime I paste in another image I lose the guides. I want to know where I am in the second.
View 8 Replies
View Related
Apr 20, 2009
I have just become aware of the smart guides in CS4. They seem to show up momentarilyin vicinity of certain points e.g. the center of page or the pupil of human eye.I have found very little about them in the help section -
View 4 Replies
View Related
Oct 29, 2007
When adding a guide in CS2, it would usefully snap to the centre of the current layer. Sadly, cannot make this happen in CS3 except for text layers.
View 18 Replies
View Related
May 21, 2009
is there any way to create multiple guides in an image by giving the space in pixels or inches as I have to put hundreds of guides in some images and I dont want to do the standard drag and drop procedure of making guides because its more time consuming and also I have the exact pixels location where I need to put those guides in different images ( I dont want to record actions either because images are different),
View 1 Replies
View Related
Jan 10, 2007
A desinger gave me files with guides. I can turn them off while in PS, but can't figure out how to get rid of them permanently.
View 3 Replies
View Related
Nov 16, 2012
I do not understand why adobe has eliminated any dragable guides in Elements 5.0.
View 1 Replies
View Related
Jun 6, 2012
It would be very handy in determining movement between frames..
View 6 Replies
View Related
May 12, 2007
I've placed about a dozen guide lines on a blank document but now need to actually "see" those guidelines in the actual print for cutting purposes. is there a way to "convert" them from invisible to visible?
View 6 Replies
View Related
Aug 22, 2005
is there some kind of guide to make signatures with ps?
like what brushes and what things do you use to make them? or is it random?
View 1 Replies
View Related
Feb 7, 2004
Is there some way to make new images based on the guides? I have a file I need to cut into smaller ones, and I've put guides to block everything off -- but guides seem mostly cosmetic / snap to grid, and less useful otherwise.
View 1 Replies
View Related
Jul 3, 2008
I would like to have my cursor snap TO guides at time but cannot find a way to make this happen. Is this an option in PS cs2?
View 2 Replies
View Related
Jan 10, 2008
The one with the glasses and lank hair, sitting at the back with no mates!
Now have CS3, and cant get the selection to snap!
When using the MARQUEE it positions the selection 2 pixels up and 1 pixel to the left of the guide (on the outside).
The guides will snap to the selection, however.
Sometimes when GUIDES are LOCKED the selection will snap to a guide, but not always.
Also, in the old days the curser would turn red when on a guide when lined up corrctly. This doesn't seem to happen now.
And in the mists of time do I remember correctly that there was a setting in which you could choose the snap distance?
View 1 Replies
View Related
Nov 22, 2004
I did a mockup in Photoshop for a design that needs to go to press in a couple of days. It's complete with guide marks...
Now, I realize that it needs to be slightly smaller than I originally laid it out to be.
I can free-transform it down to the right size... but, my guides don't come with it. They stay the same. Is there a way to get the guides to shrink along with everything else?
View 4 Replies
View Related
Aug 19, 2005
To make guidelines that lead to vanishing points, I make a 1 pixel line and rotate it until it is aligned, though at times this process becomes cumbersome. Is there an easier way to create guide lines to vanishing points?
View 1 Replies
View Related
Jun 7, 2006
I don't use smart guides, don't want em don't need em. Don't even know why they originally came on, but can't get them off, no matter how many times un check them.
View 8 Replies
View Related
Nov 7, 2012
I'm working on a 960 grid layout, with all the vertical guides showing the grid.
I want to increase my canvas width from 960 to 1200, keeping the artwork centred, so in the canvas size dialog box I select the center anchor. Unfortunately this keeps the artwork centred but the guides always move left, as if they're anchored to the left of the canvas. This means the guides are no longer in position.
Is there any way to add more canvas to both sides while keeping the guides where they are relative to the artwork?
View 4 Replies
View Related
Apr 20, 2006
I have to save the smart guides and the slices created with those smart guides.
Is there a easy way to do this independed ( in a separate file ) from my curent design?
I need those for some comming works.
The only thing I comeup with is save a copy of the current design, clear the layers and use it as a template.
But then I lose some flexability if I had to change a smart guide and want to update existing designs.
View 2 Replies
View Related
Jul 22, 2005
is there anyway of saving my slice and guides to use as a template for other projects? I've sliced up one image and created an HTML page, and the next image I want to use the same slice and guide positions, with some very minor adjustments.
can I apply one slice/guide template to another image in PS7?
View 4 Replies
View Related
May 21, 2013
I have a quite large Photoshop document where I've drafted up a number of pages for a website, and I require guides which are specific to certain layers or groups, and not just to the whole document. Is this possible? Any plugins which serve this purpose, or functionality I'm missing?
I'm using Photoship CS6 on a Mac OSX 10.8.3
View 4 Replies
View Related
