I have to save the smart guides and the slices created with those smart guides.
Is there a easy way to do this independed ( in a separate file ) from my curent design?
I need those for some comming works.
The only thing I comeup with is save a copy of the current design, clear the layers and use it as a template.
But then I lose some flexability if I had to change a smart guide and want to update existing designs.
is there anyway of saving my slice and guides to use as a template for other projects? I've sliced up one image and created an HTML page, and the next image I want to use the same slice and guide positions, with some very minor adjustments.
can I apply one slice/guide template to another image in PS7?
I have just become aware of the smart guides in CS4. They seem to show up momentarilyin vicinity of certain points e.g. the center of page or the pupil of human eye.I have found very little about them in the help section -
View 4 Replies View RelatedI don't use smart guides, don't want em don't need em. Don't even know why they originally came on, but can't get them off, no matter how many times un check them.
View 8 Replies View RelatedI was working on a project and using Smart Guides, but suddenly, they disappeared. I don't know what I did, the Smart Guide box is still checked in the View panel, and if I open a new document, they work just fine again. what other settings I should check?
View 3 Replies View RelatedI'm having some trouble with smart guides in Ai CS6. They are on. However, when my cursor intersects a guide path, words like 'intersect' and 'guide' do not appear, as I have seen them do for others. Also, the 'heads-up' information display that shows the width and height, e.g. when using the grid tool, does not appear either.
The guides are working to some extent, it seems, since I do get green lines here and there.
Seems like both should still work when snap to pixels is on... but they don't. Any reason for this?
View 13 Replies View RelatedIn AI, smart guides indicated "intersection" when I am drawing a path or moving an object to align to the intersection of two guides, when I release the mouse, the object I am moving/drawings jumps slightly off the intended alignment intersection. If I continue to try to move it to align, it jumps to the other side or back to where it was but will mot match the intersection.
View 4 Replies View RelatedI have a number of vertical and horizontal guides to be placed, at different points. Is there a better way of placement rather than zooming up on the ruler area, watching the Nav coordinates and dragging and dropping? I'm really looking for a method which will I can key in the actual placement coordinates in some way, and the guide will jump to this point?
View 6 Replies View RelatedWhy doesn't this mature software have robust save to web features? The save to web component should be shared between Photoshop and Illustrator.
View 1 Replies View RelatedI tried to use the export function "save for web" in Illustrator CC 17.1.0 for the first time in many weeks.
I created a document with some slices. Strangely, in the dialogue of "save for web", the image preview isn't shown in the original size although the setting is set to 100%. It seems, like the preview is only about 50% of the original image size.
Furthermore, it is impossible to select the specific slices for renaming it. Also setting up the preview to 200% doesnt solve the problem.
I already uninstalled illustrator with the uninstall file and downloaded the software from the cloud again. But the problem still exists. I also created a complete new document without success...
I'm using Mac OS 10.9.1.
Since the Save images as SVG has been removed from Save For Web in CS6, is there a way to save slices as SVG images in illustrator CS6?
I tried the Save As menu but it only allows me to save the whole artwork instead of slices.
I have slices in my document. On one slice, I have added some information under the Slice Options, such as a URL and an alt tag. When I choose Save Selected Slices, I get a drop-down menu in my Save dialog called File Format. The only choice in this drop-down is "Images Only." Same thing happens if I try to save the selected slice via the Save for Web dialog. Didn't you used to be able to choose to save the HTML as well? Or, is there ever another choice in this drop-down?
View 3 Replies View RelatedWhat I mean:
Draw an ellipse. Skew it with mouse.
Draw a rectangle to allign with ellipse's outer dimension by Alignment Guides (not by Align and Distribute command).
Now the aligned side of the Rectangle must be tangent to the ellipse BUT it's not! To verify, try to search an intersection point. Draw a Guideline and snap it to the rectangle's aligned side. It must be intersection point between Guideline and Ellipse but there isn't...
CorelDRAW X6
I just had a question about the slice tool. Is there anyway I can save slices I make to one .psd file so they can be applied to another .psd file?
For example with these two layouts (2 images):
If I could apply some certain slices to the first one, it would be nice to automatically be able to apply them to the second.
The help doesn't mention this as a benifit (that I can find), but I'm wondering if I can save on RAM by keeping a dozen layers in a smart object rather than keeping those dozen layers in the image itself.
I'm starting an image that's 30,000x10,000 pixels (8'x24' banner @ 100DPI), and I know my system is going to choke on all these layers even with 4GB of RAM and dedicated RAID 0 scratch disks.
I've got a PSD file in which I have pasted some vector paths from Illustrator as a Smart Object. Everything works as expected.
When I save the PSD as a PDF, the PDF that I receive is entirely raster based. The vector based paths are not preserved as vectors - they are rasterized.
Is this a limitation of the Smart Objects, or is there some way to yield a PDF which would include the Illustrator generated artwork as vectors?
How do I save something as a Smart Object? I was watching Photoshop TV and he loaded a smart object. I looked at the saving options and also looked at Save...Selection.
View 6 Replies View RelatedI am finishing a poster, fully created in shapes in illustrator. Due to customers request I was forced to do some color corrections so I decided to use my PhotoShop CS6.I imported vector files into my photoshop as smart objects, added some adjustments layer, few vector masks and I changed their layer style to get the finest result.
When I finished my work in PS I tried to save this as .pdf In my .psd there are shape layers, some groups and some adjustments layers with layer masks and changed Layer style to "color", one text layer and 3 smart objects imported from illustrator.I want to keep my image scaleable for bigger resolutions.
So I was trying to save this file as Adobe PDF but I found that whole graphic in exported .pdf was converted to raster, besides the border, cut marks and that one text layer.I think that this is because of smart objects. (saving as .pdf without them works pretty good)
Is somehow possible to save this document from photoshop as vector.pdf? or is possible to import group of shapes from illustrator to photoshop as shapes in photoshop? no as smart objects.
I am running out of time so I saved it as high res .Jpeg, but I want to know if this is somehow possible for future use or If I have to rather avoid that solution. Will be included .pdf file as raster? or it will stay scaleable even with smart objects in it?
I create graphs, etc in Illustrator, place them as Smart Objects in a master Photoshop file before outputting Save for Web JPEGs to use as PowerPoint slide backgrounds. Everything created in Illustrator or Photoshop through that process (Quality 80 or 100 with any of the SfW options on or off) Save for Webs are blurry when imported (at 100%) into PowerPoint.
The only way I have been able to get anything crisp in PowerPoint was saving a Photoshop pdf. However, that was only the text created in Photoshop. The Illustrator Smart Object part was still blurry. What is the best process to combine Photoshop and Illustrator files into one file for import into PowerPoint as a clean, crisp background?
I need to save a vector smart oblect from Photoshop CS6 to an Illustrator file. What's the trick?
View 4 Replies View Related1. Is there a way for masking each smart filter separately on a single smart object other than nesting one smart object into the another?
2. Is there a way for removing the previously created smart object?
I mean ... let's say I have a smart object containing four layers. Can I remove smart object from these layers?
Why doesnt the smart filter mask move with the smart object?
View 14 Replies View RelatedPs CS6
OSX 10.6.8
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
can i get some links to some really good slice tool tutorials?
View 1 Replies View Relatedhave played with Photoshop but never done any thing for the web, was wondering, how are slices saved and what makes the html code to use.When they are saved do they all have the same code or diferent codes? Keep it simple as you can, dont really understand this part.
View 3 Replies View RelatedIs there a way to slice PSD slices that appear on top of eachother in a PSD? What I mean is, can I assign a slice for each layer - since in the PSD the layers all appear at the same x,y coordinates...
View 1 Replies View Relatedlast couple of documents I've been working on,I've been needing horizontal and vertical guides (no problem) but why is it when i close the file (saved all work) when I open the file to continue the guides have to be redone. Isn't there a save guides option in CS6
View 4 Replies View RelatedIs there any way to paste guides, or, putting it another way, can I take an image, add guides, erase the image, keep the guides and paste in another image? Everytime I paste in another image I lose the guides. I want to know where I am in the second.
View 8 Replies View RelatedWhen adding a guide in CS2, it would usefully snap to the centre of the current layer. Sadly, cannot make this happen in CS3 except for text layers.
View 18 Replies View Relatedis there any way to create multiple guides in an image by giving the space in pixels or inches as I have to put hundreds of guides in some images and I dont want to do the standard drag and drop procedure of making guides because its more time consuming and also I have the exact pixels location where I need to put those guides in different images ( I dont want to record actions either because images are different),
View 1 Replies View Related