I was working on a project and using Smart Guides, but suddenly, they disappeared. I don't know what I did, the Smart Guide box is still checked in the View panel, and if I open a new document, they work just fine again. what other settings I should check?
View 3 RepliesI'm having some trouble with smart guides in Ai CS6. They are on. However, when my cursor intersects a guide path, words like 'intersect' and 'guide' do not appear, as I have seen them do for others. Also, the 'heads-up' information display that shows the width and height, e.g. when using the grid tool, does not appear either.
The guides are working to some extent, it seems, since I do get green lines here and there.
Seems like both should still work when snap to pixels is on... but they don't. Any reason for this?
View 13 Replies View RelatedIn AI, smart guides indicated "intersection" when I am drawing a path or moving an object to align to the intersection of two guides, when I release the mouse, the object I am moving/drawings jumps slightly off the intended alignment intersection. If I continue to try to move it to align, it jumps to the other side or back to where it was but will mot match the intersection.
View 4 Replies View RelatedI have just become aware of the smart guides in CS4. They seem to show up momentarilyin vicinity of certain points e.g. the center of page or the pupil of human eye.I have found very little about them in the help section -
View 4 Replies View RelatedI don't use smart guides, don't want em don't need em. Don't even know why they originally came on, but can't get them off, no matter how many times un check them.
View 8 Replies View RelatedI have to save the smart guides and the slices created with those smart guides.
Is there a easy way to do this independed ( in a separate file ) from my curent design?
I need those for some comming works.
The only thing I comeup with is save a copy of the current design, clear the layers and use it as a template.
But then I lose some flexability if I had to change a smart guide and want to update existing designs.
3D feature has suddenly disappeared from my photoshop CS6 which was operating properly before
View 1 Replies View RelatedThe light lister seems to have suddenly disappeared. Clicking on it from the tools menu and the dialogue box doesn't show up. I'm using 3ds max design 2014.
View 3 Replies View RelatedIn LR 4.1 Develop Module the Basic Panel suddenly disappeared. Why? How do I get it back?
View 2 Replies View RelatedSUDDENLY nothing happens with smart object. The history adds a state,"edit contents", but ACR window never opens and now I'm screwed cuz this document has 13 SO's waiting for work. This has happened plenty in the past.
PS CC
ACR 8.1...
OSX.8.3
What I mean:
Draw an ellipse. Skew it with mouse.
Draw a rectangle to allign with ellipse's outer dimension by Alignment Guides (not by Align and Distribute command).
Now the aligned side of the Rectangle must be tangent to the ellipse BUT it's not! To verify, try to search an intersection point. Draw a Guideline and snap it to the rectangle's aligned side. It must be intersection point between Guideline and Ellipse but there isn't...
CorelDRAW X6
I have a number of vertical and horizontal guides to be placed, at different points. Is there a better way of placement rather than zooming up on the ruler area, watching the Nav coordinates and dragging and dropping? I'm really looking for a method which will I can key in the actual placement coordinates in some way, and the guide will jump to this point?
View 6 Replies View RelatedHow do you get Illustrator (CS5) to snap to guides? I don't want to use smart guides -- just regular old-fashioned guides. I drew a rectangle. I divided the path into a grid. I turned the grid into guides (make guides). But I cannot get anything to snap to the guides. Also, can I control the snap distance (like you can with smart guides)?
View 5 Replies View RelatedWhen creating stuff I always have a separate layer for guides. I keep trying to select specific guides and they blink and that is it...can't select them? The layer isn't locked, so I don't understand...
View 6 Replies View RelatedI am working on a large wall sticker and I need to "slice" the image into pieces for vinyl printing. Is there anyways to place guides (or slices) and have them be converted to separate art boards for printing? In the past I would make individual art boards the exact size of each object and save them one at a time to send to the printer. Then once the art came in I could piece the wall art back together as I applied it to the wall or glass, But this is time consuming.
View 1 Replies View RelatedI like to use the construction guides in Illustrator, however I can't get them to work. I have it checked off in Preferences.
View 9 Replies View RelatedEverytime I try to place a guide on an object/ piece of type, the guide bounces away from the object by a number of pixels. how to find where to switch it off/ make it more accurate,
View 1 Replies View RelatedI've just rotated an artboard to portraight from landscape, then selected all the guides and transform rotated them 90 deg. With this method all the guides need to be readjusted for corrrect positioning
Is there a way to reorientate the artboard with guides in place?
For instance I have a series of guides set across 10 horizontal artboards. I need two more in a vertical format, but all of the guides from the horizontal are carried through.
View 4 Replies View RelatedI've created a very basic shape using the 3D grid as my guide - picture if you will 4 boxes, one on top of each other (as per illustration below):
Each "box" is made up of 3 shapes to give the 3D effect.
I need to resize one of the boxes, the yellow one, which needs to be resized in keeping with the 3D framework (making it smaller in height), and then placing the yellow box above the purple box. How this can be done without having to redraw the shapes in the required positions.
I might add it is the grouped shapes that makes up the box which I am trying to resize in one hit, as opposed to the individual shapes.
I need access to AI guides in AfterEffects shift+alt+ctrl double click doesn't always work.
Is there a script to convert all guides to paths?
How do I get "guides and grids" to stay as I input them in Illustrator 6? Didn't used to return to default setting in previous versions
View 4 Replies View RelatedThe problem: when I rotate a guide in Illustrator CC and then want to move that guide while zoomed way in (+300%) I am unable to select the guide. Annoying? Most definitely.
View 2 Replies View RelatedDraw a box. Draw a Guideline. Have all snaps on. Including "smart Guides".
Drag proportionally (by holding down SHIFT) the size of the box... and it won't snap to the Guides.
How can proportional scaling be down by dragging, and have Guides and other nodes, vertices, anchors, "smart Guides" etc actually functional as Snap positions?
Or Adobe figure there's no need for accuracy when proportionaly scaling?
I currently have grid setup, and I am unable to put guides specificly where I want, they will either be a few pixels to the left/right of where I actually want. It seems like my guides or rectangles that I make only snap to the grid, and I do not want this to happen since some of my shapes do not fit a grid specifically. Lets say I want my rectangle to be 4.5 Grid blocks (each block being 25 px), so 112.5, it only allows me to do 4 blocks or 5 blocks. Is there a preference that can be changed so I can make free shapes without having them direct on the grid?
Attached an example. I'm trying to make the red box the same width and in the same position as the black and it does not let me.
I guess I found my solution, under the transform fly out menu when "align to pixel grid" is unchecked it fixes this.. Is there a better way to do this though?
I'm working on a few objects I have to divide using diagonal guides. However, when I try to select one of them above 600% zoom, I'm not able to activate them using the selection tool or the direct selection tool. I can select them using the layers panel but as soon as I zoom in above 600% and try to move them with the selection tools they get deselected.
View 2 Replies View RelatedHitting Command and U cancels the drawing process. Is there a way to not have this happen? - It's useful to be able to engage the guides to start the line aligned to another object via smart guides, but I'm unable to continue the line without 'starting it again'.
View 8 Replies View RelatedHow do I get the location of horizontal and vertical guides?
I'm halfway through by using some calculations on geometric bounds and subtracting it from the document height but can't I just do something like
nextGuide =mydoc.guides[x].location;
Also, why does it seem that Indesign scripting has more access to properties and methods?
Here's a screen shot to show what I mean. I tried to create this smaller box off of the anchor point of the larger box.
Currently usuing AI CS6 on a mac running osx 10.6.8
How to adjust 9 slice scaling guides of symbol by script?
View 1 Replies View Related