I cant seem to get the tapered effect to occur when stroking a path. I strok the path after selecting the brush tool.
Choose Brush and make sure there is a tick next to Simulate Pressure. This is important as it will give your curve tapered ends which will make it rock!
I have an image open.
I choose the pen tool and then click a place on the image and then a second and a ‘line’ connects them. Two anchor points and a line between them.
I go to the Paths pallet and save this work so that the Paths layer says, “Path 1” and I've also tried doing it unsaved.
Then I try stroking it with the brush in any of the three ways you get to the stroke command i.e. right click, upper right arrow, etc.
The dialogue box comes up and I choose brush (having already chosen a 14 pix width and 100%) and it should stroke my line but all it strokes are the two (or more if I put them in) anchor points.
The funny thing is if I create my line with the pencil tool it will stroke it with no problem but not any line drawn with the pen tool.
I am simulating ropes so the pencil line is not smooth but all pixulated and I want to learn how to stroke with the pen tool.
I am using photoshop cs (really just learning), and when I try to stroke a path to make a border, all I get is my brushes stroke at the corners or sharper curves. Is this what is supposed to happen, am I doing something wrong, or is there a way to make a "border" around the entire path?
View 3 Replies View RelatedI create a path with a few anchor points, but when I try to stroke the path, it only strokes the anchor points, showing up as dots the size of my brush. How do I get it to stroke the length of the entire path?
View 9 Replies View RelatedI´ve been making pixel art for a while now and recently I upgraded to cs6. all was fine till I tried to stroke a circular path with the pencil tool. The Circles it makes are completely uneven.
Â
These are the paths i traced in different sizes
Â
this is the stroked path with a 1 x 1 pixel pencilÂ
as you can see the the bottom and right part of the circles is different from the top left. it is more noticeable on smaller circles.it also happens with bigger stroke sizes.this diddn´t happen in cs5.
I've created a curved path and am having probs creating an even line using the Stroke Path tool. For some reason, the line gest heavier in places and I just want an even smooth thin line. I've tried using the brush and the pencil tools... screengrabs below. Would really appreciate any advice. Thanks! Mo The path: Stroke with the brush tool Stroke with the pencil tool: My brush settings:
View 2 Replies View RelatedI am working on a file where there are kangaroos that are compound paths. I need to stroke only parts of them. Is there a way to do that? Should I just manually be drawing paths that go right up to the edge of the compund path (drawing my own stroke)?
View 9 Replies View RelatedI have experienced the following behavior:
Â
1. Adding Effects to a path applies the effect but the effect is not visible in the Appearance panel.
2. In conjunction with this, it appears that internal stroking of the object creates a weird offset. The stroking is visually incorrect. The stroke generally offset by -1 on each axis. If the object has had a rounding effect applied to it, some of the corners become mangled.
I've been playing around with the pen tool and i was wondering whether there was a way of altering the brush dynamics so that when i stroke the path it produces a tapered effect i.e. so that the path starts as a point, grows thicker towards the middle, then tapers back to a point?
View 2 Replies View RelatedI want to create a stroking light effect that reacts to the amplitude of a song... any easiest way to do this?
View 1 Replies View RelatedI have cs5 photoshop and it seems to have a very limited amount of brush styles. Other people with cs5 have a large range of standard styles. I am just after the standard tapered end brush (tapered on both ends).
View 6 Replies View RelatedWhen i crop part of an image (in this case my web site) photoshop automaticaly strokes the inside of the crop!! When i then put the images into a table in html all the separate images have a box around them!
View 9 Replies View RelatedEdit>Stroke path
Right click
the little right-arrow on the Paths palette
The Circle at the bottom of the paths pallette
(Why does it need more than one?)
Eg - I've just made a curve with the pen tool, fine. I can select it, move it about, but I can't stroke it.
All the menu options are dimmed. By trying anything I might think is appropriate, I usually get there, but quite often either the whole layer boundary is stroked, or a V shaped path when stroked gives a triangle, or an S shaped curve has the ends connected as though by White, so there's a bit missing in the middle.
Often I retry something I believe ought to work, and hey presto it does - but it didn't the first time.
I've read and reread Classroom in a Box and the help files, but I'm missing something.
CS2, XP.
I've tried using Brush dynamics and spacing, but can't figure out how they got it to taper in two directions. Is this a pattern or something?
View 1 Replies View RelatedI made a vector shape of an arrow (see below) and then rasterized the layer.
Then I double-clicked the layer and gave the grey shape a 1px black stroke outline. Only after hitting OK, the 1px black stroke shows up as a thick, grey stroke.
I know there are many ways to create light beams or God beams.There are several tutorials and net has many brushes.I just want to make a simple tapered brush in Photoshop CS6 so that If I click at a source like window then shift click at another place I get a 'tapered' beam, smaller at origin and flaring to larger size, like a flashlight beam
it should be easy with shape dynamics and all, but I am not able to figure this out.
I have Photoshop CS5. When stroking type, I can't get the edges/corners sharp (see attachment)- is there a way to do this? Possible in CS6? I believe possible in Illustrator, but cheaper and easier for me to do it in Photoshop if possible (I don't have any version of Illustrator), and I won't have to learn a new program.
View 6 Replies View RelatedI'm trying to assign a motion path to the light rays effect on one of my layers but i can't seem to find a way to do it and google has turned up nothing. the problem is the effect needs to be on a certain layer in order to make the effect look right but i don't want the layer to move i only want to affect the centre point of the effect. i can assign key frames and animate it to move in straight lines but i need it to move in a curve and there seems to be no way to alter the motion path or assign it to one on a null layer.
View 3 Replies View RelatedTo create realistic threads, I simply sweep the thread profile along a helix with Align set to “no”. (This actually creates the negative of the thread, which must then be subtracted from a cylinder.)
When I attempt to follow the same procedure using a conical helix to produce tapered pipe threads, however, it does not work. When I set Align to “no”, I get an error message saying “cannot sweep the profile”. If I try it with Align set to “yes”, the profile is twisted and the result does not look like threads.
Any way around this issue, or is this a fundamental limitation of AutoCAD?
After GROWing a letter in a word by one or more pixels, I tried to STROKE the action and it didn't seem to work properly. I would like the letter to be totally filled with its solid color... but instead, it just seemed to outline the letter, leaving white space between the new GROW line and the actual letter.
how to end up with a "fatter" letter that's completely filled?
I have created a pattern brush and applied it to a stroke. My question is: Can I now taper the pattern brush once applied to the stroke?
View 3 Replies View RelatedI am making a button and I am trying to add a glossy effect by putting a eclipse over the button like this
Â
But of course I only want the eclipse on the button. I must be doing something wrong because the intersect is not working.
I made a coil with taper. Now I want to make a drawing with that taper, but I don't know how to do that.
View 3 Replies View RelatedIs there a way I can create dynamic blocks that taper to a square point? I work with different styles of lattice towers and monopoles and I would like to create a dynamic block of a couple styles and have them taper with the correct scale.
View 1 Replies View RelatedIm using Inventor 2013 and im trying to make a tapered coil but instead of creating it with a liner taper i want a curved taper. Is there a way to create this (perhaps using guide curves like loft feature?)Â
View 9 Replies View RelatedI have a arc that is about 21.5 radius and .5 in width. My problem is that it is going on a bench that i have made and the corner piece needs to be cut out and i am trying to figure how to make this line look like an actual piece. I can extrude the piece to 21 inches tall, but then i need it tapered back to fit this bench were making.
View 9 Replies View RelatedProbably a really simple fix to this, but I'm still new to Illustrator Â
Â
This is the image that I need to be outlined, but only around the very outside border.
Applied a regular stroke:
Grouped it with another part that also needs outlining on just the outside edge, and tried using a method I saw on here: and the results:
I have a section view of tapered part and I want to get the dimension (radius) but it is not possible. Is there any other option aside from having a perpendicular section view? How to customize the 2D drawing setting?
View 2 Replies View RelatedI'm trying to make an extrusion that ends on a tapered surface which has different angle in drawing.
View 6 Replies View RelatedI have created a video consisting a many photos with some video. Some photos, e.g. a horizontal close striped golf shirt, gives a flickering effect in the output video file.
I do have the anti-flickering filter checked. Ran a test with filter off, but this did not correct it. Offending photos are approx. 2.5 meg JPEGs.
I am trying to get my roof to show the slope of the tapered insulation layout. See
RoofSlopes.png
Â
This is done with lines currently. When I try to modify the sub elements to get the look I get a bunch of lines that aren't needed and can't seem to remove them. See
RevitRoofSlopes.png
Â
How to have success using the modify sub-elements tool for Roofs? The Wiki help shows rectangles and squares, not every roof has that shape.