Photoshop :: Stroking When Cropping

Jul 7, 2004

When i crop part of an image (in this case my web site) photoshop automaticaly strokes the inside of the crop!! When i then put the images into a table in html all the separate images have a box around them!

View 9 Replies


ADVERTISEMENT

Photoshop :: Stroking A Path?

Nov 7, 2005

I have an image open.

I choose the pen tool and then click a place on the image and then a second and a ‘line’ connects them. Two anchor points and a line between them.

I go to the Paths pallet and save this work so that the Paths layer says, “Path 1” and I've also tried doing it unsaved.

Then I try stroking it with the brush in any of the three ways you get to the stroke command i.e. right click, upper right arrow, etc.

The dialogue box comes up and I choose brush (having already chosen a 14 pix width and 100%) and it should stroke my line but all it strokes are the two (or more if I put them in) anchor points.

The funny thing is if I create my line with the pencil tool it will stroke it with no problem but not any line drawn with the pen tool.

I am simulating ropes so the pencil line is not smooth but all pixulated and I want to learn how to stroke with the pen tool.

View 4 Replies View Related

Photoshop :: Stroking A Path With CS

Jan 1, 2004

I am using photoshop cs (really just learning), and when I try to stroke a path to make a border, all I get is my brushes stroke at the corners or sharper curves. Is this what is supposed to happen, am I doing something wrong, or is there a way to make a "border" around the entire path?

View 3 Replies View Related

Photoshop :: Stroking A Path

Dec 13, 2005

I create a path with a few anchor points, but when I try to stroke the path, it only strokes the anchor points, showing up as dots the size of my brush. How do I get it to stroke the length of the entire path?

View 9 Replies View Related

Photoshop :: Stroking Paths

Dec 21, 2007

Edit>Stroke path

Right click

the little right-arrow on the Paths palette

The Circle at the bottom of the paths pallette

(Why does it need more than one?)

Eg - I've just made a curve with the pen tool, fine. I can select it, move it about, but I can't stroke it.

All the menu options are dimmed. By trying anything I might think is appropriate, I usually get there, but quite often either the whole layer boundary is stroked, or a V shaped path when stroked gives a triangle, or an S shaped curve has the ends connected as though by White, so there's a bit missing in the middle.

Often I retry something I believe ought to work, and hey presto it does - but it didn't the first time.

I've read and reread Classroom in a Box and the help files, but I'm missing something.

CS2, XP.

View 3 Replies View Related

Photoshop :: Stroking Path With Pencil CS6?

Feb 11, 2013

I´ve been making pixel art for a while now and recently I upgraded to cs6. all was fine till I tried to stroke a circular path with the pencil tool. The Circles it makes are completely uneven.
 
These are the paths i traced in different sizes
 
this is the stroked path with a 1 x 1 pixel pencil 

as you can see the the bottom and right part of the circles is different from the top left. it is more noticeable on smaller circles.it also happens with bigger stroke sizes.this diddn´t happen in cs5.

View 3 Replies View Related

Photoshop :: Stroking A Vector Shape

Jan 2, 2007

I made a vector shape of an arrow (see below) and then rasterized the layer.

Then I double-clicked the layer and gave the grey shape a 1px black stroke outline. Only after hitting OK, the 1px black stroke shows up as a thick, grey stroke.

View 4 Replies View Related

Photoshop :: Stroking Path Tapered Effect

Mar 3, 2012

I cant seem to get the tapered effect to occur when stroking a path. I strok the path after selecting the brush tool.

Choose Brush and make sure there is a tick next to Simulate Pressure. This is important as it will give your curve tapered ends which will make it rock!

View 5 Replies View Related

Photoshop :: Why Does Stroking A Path Give An Uneven...

Aug 18, 2009

I've created a curved path and am having probs creating an even line using the Stroke Path tool. For some reason, the line gest heavier in places and I just want an even smooth thin line. I've tried using the brush and the pencil tools... screengrabs below. Would really appreciate any advice. Thanks! Mo  The path: Stroke with the brush tool Stroke with the pencil tool: My brush settings:

View 2 Replies View Related

Photoshop :: Sharp Corners / Edges When Stroking Type In CS5

Jul 4, 2013

I have Photoshop CS5.  When stroking type, I can't get the edges/corners sharp (see attachment)- is there a way to do this?  Possible in CS6?  I believe possible in Illustrator, but cheaper and easier for me to do it in Photoshop if possible (I don't have any version of Illustrator), and I won't have to learn a new program.

View 6 Replies View Related

GIMP :: STROKING After Using GROW Command

Feb 7, 2014

After GROWing a letter in a word by one or more pixels, I tried to STROKE the action and it didn't seem to work properly. I would like the letter to be totally filled with its solid color... but instead, it just seemed to outline the letter, leaving white space between the new GROW line and the actual letter.

how to end up with a "fatter" letter that's completely filled?

View 4 Replies View Related

Illustrator :: Stroking Only Part Of Compound Path?

Feb 11, 2014

I am working on a file where there are kangaroos that are compound paths. I need to stroke only parts of them. Is there a way to do that? Should I just manually be drawing paths that go right up to the edge of the compund path (drawing my own stroke)?

View 9 Replies View Related

Illustrator :: Stroking Outside Border Of Object With Holes

Mar 17, 2014

Probably a really simple fix to this, but I'm still new to Illustrator  
 
This is the image that I need to be outlined, but only around the very outside border.

Applied a regular stroke:

Grouped it with another part that also needs outlining on just the outside edge, and tried using a method I saw on here: and the results:

View 3 Replies View Related

VideoStudio :: Photos Flickering / Stroking In MPEG Output File

Sep 11, 2013

I have created a video consisting a many photos with some video. Some photos, e.g. a horizontal close striped golf shirt, gives a flickering effect in the output video file.

I do have the anti-flickering filter checked. Ran a test with filter off, but this did not correct it. Offending photos are approx. 2.5 meg JPEGs.

View 1 Replies View Related

Illustrator :: Stroking A Path Causes Weird Offset (internal / External Stroke)

Feb 13, 2014

I have experienced the following behavior:
 
1. Adding Effects to a path applies the effect but the effect is not visible in the Appearance panel.
2. In conjunction with this, it appears that internal stroking of the object creates a weird offset. The stroking is visually incorrect. The stroke generally offset by -1 on each axis. If the object has had a rounding effect applied to it, some of the corners become mangled.

View 1 Replies View Related

After Effects :: Create Stroking Light Effect That Reacts To Amplitude Of Song

Nov 27, 2013

I want to create a stroking light effect that reacts to the amplitude of a song... any easiest way to do this?

View 1 Replies View Related

Photoshop :: Cropping In CS6

Jul 18, 2013

why can't i get my executed crops to save?

View 5 Replies View Related

Photoshop :: CS4 Cropping

Jun 7, 2009

I just got Photoshop CS4 (Design Suite Standard) last week after having used Elements (2, then 3) for the last five years.  In Elements, when you use the crop tool, you can move the entire frame around by clicking on the dot in the center and moving it. It seems that in CS4, when I attempt to move the frame, only the center dot moves without moving the frame lines.  I looked through the PDF manual, but couldn't find any explanation how to change this. I'll likely be back with more questions as I try to learn how to use CS4.

View 2 Replies View Related

Photoshop :: Cropping In CS3

Mar 13, 2009

I want to scientifically crop 2 pixels away from an image. The image is not square but the crop will be. Is there a handy tool to do that?

View 1 Replies View Related

Photoshop :: CS4 Cropping

Jun 30, 2009

I select the area to be cropped on the image.

Select "image>crop" and enter.

The picture disappears.

I had this happen with CS3 once; it was suggested to reinstall;

This time I have reinstalled PS CS4 twice (uninstalled first) and it still does this.

My PS CS3 was a separate PS package; the CS4 is part of the Adobe Creative Suite 4 (standard). The second reinstall, I reinstalled the whole Creative Suite. Still does the disappearing act.

View 9 Replies View Related

Photoshop :: CS4 With Cropping...

May 30, 2009

I go to crop or use the marquee tool(such as to make a border, when I put the cursor where I want it and left click to start cropping(for example) very often the cropping lines just do not stay where I want them...they go all over the place. This happens with both tools...

View 8 Replies View Related

Photoshop :: Cropping In CS3

Jul 24, 2007

I am having problem to crop using ratio instead of values of inches or pixels. In cs2 if i enter any values eg. 6 in width and 4 in height w/out specifying the unit it will use that value as ration instead, in this case 6:4. No resolution as i dont want to resample.

But when i tried this in cs3 it will use the value and i will get a 6 by 4 inches image instead of ratio.

View 9 Replies View Related

Photoshop :: Cropping Image Into 6

Jul 1, 2013

Photoshop 6. If I crop an image in photoshop 6 it becomes a 'layer'which I then need to 'flatten' before saving as a jpg file. How do I stop this happening?

View 1 Replies View Related

Photoshop :: CS2 Is Cropping Pictures On MAC

Nov 8, 2013

MY PROBLEM WITH PHOTOSHOP CS2 IS CROPPING PICTURES ON A MAC

View 1 Replies View Related

Photoshop :: Straighten Without Cropping?

Nov 10, 2012

I haven't been able to figure out how to use the Straighten tool without cropping.
 
I am starting with a full page image with Pixel Dimensions of 9750 x 13050 pixels, and a Document Size of 8.125 x 10.875 inches. I want to use the Straighten tool, and then use the Patch tool to fix the resulting irregularities around the edges.
 
But no matter what I try, I end up with smaller Pixel Dimensions and a smaller Document Size; for example: 9725 x 13016 pixels and 8.104 x 10.847 inches. This occurs regardless of whether I have the Delete Cropped Pixels boxed checked.
 
I also tried starting with a Canvas Size of 8.125 x 10.875 inches, and using Place…to bring in the image. But the Straighten process still results in a similar reduction in the Pixel Dimensions and Document Size.
 
I am accessing the Straighten tool via the Crop tool. Is there any other method to Straighten?
 
The screenshots below show the original Image Size (top) and the Image Size after Straighten (bottom).

View 2 Replies View Related

Photoshop :: Cropping Tool In CS6

Aug 5, 2012

I am having difficulty with the new cropping tool in CS6... It is said to be a huge leap forward, however, I am finding it to be a big step backward.
 
The Issue?
 
In all of my previous versions of Photoshop I have been able to go to the crop tool, set the size that I wanted the photo to be after cropping and that would be the size I get. This is something that I can no longer do in CS6... Or if I can it is not as simple. As a professional Photographer that takes anywhere from 500 to 900 photos per sporting event that I do, I need to be able to quickly go in and crop my photos to the size I want them to be and away I go.

How to continue this feature in the new Photoshop I will glad take it... but as of right now, I do not have the time to sit there and fiddle with the crop tool until the images is the size that I need it to be.

Is it too much to ask to be able to say I want a Photo cropped to 8x12 and actually get that?! For right now I will be going back to using my CS5 Photoshop so I can actually get my photos done.

View 3 Replies View Related

Photoshop :: Cropping Tools In CS5

Jan 9, 2013

I have a question regarding the cropping tool in PS CS5. When I attempt to crop an image by manually entering the dimensions in the top of PS it takes an insane amount of time.

I have yet to actually have an image complete the process because after waiting about 30 minutes to only have the image be at 30% progress I cancel the operation. It is only when I enter the dimensions manually that it does this. When I just do a random crop the task is done in a matter of seconds.

View 2 Replies View Related

Photoshop :: Slowness With Cropping?

Oct 20, 2012

I'm cropping 500mb images and the slowness of having to wait for crop generation is excruciating.

I added once ram once and did not work.this is an issue of hard drive speed correct?

View 1 Replies View Related

Photoshop :: Cropping Image

Aug 18, 2013

when I crop a picture and I want to move te framework to make a good crop, the picture oves, not he cropping-framework. I expect it is just 1 little adjustment, but I can't find it...

View 4 Replies View Related

Photoshop :: CS6 - Cropping CR2 File?

Feb 24, 2013

I'm new to CS6 and I'm having trouble cropping .CR2 files. Basically, I've just found out that I've been editing all of my RAW files as JPGs on CS5, which meant that I've been storing those huge files on my computer, but haven't been using them to their full potential. Now on CS6 I discovered Camera Raw, but I'm a bit confused as to how cropping a .CR2 file works on Camera Raw and on CS6.
 
If I open my .CR2 on Camera Raw, click 'Open Image' then use the Crop Tool, the image looks incredibly grainy (see below).However, if I open on Camera Raw and crop it there before clicking 'Open Image', it looks fine (see below). Why is that?I'm using a 5184 x 3456 px, ISO 400, 43mm, 0 EV, f/5.6, 1/60 .CR2 file and cropping it to 714 x 516 px. The image doesn't look grainy on Preview.
 
Also, when I open the .CR2 file on Photoshop, the image looks really dull and lifeless compared to when I see it on iPhoto (see below). Is that because the RAW file is stripped of all settings to give me more flexibility when editing it? If so, is there a way to match the settings that I see on iPhoto?

View 9 Replies View Related

Photoshop :: Use CTRL-key When Cropping Always?

Aug 31, 2012

In previous versions of PS I could just move the crop area around freely, rotating and resizing it. But now it seems it always snaps to is default position and I need to keep the CTRL-key pressed if I want to move it around without snapping.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved