Photoshop :: Round Line Tool
Jul 7, 2007possible to round out the line tool?
like make a curve?
cause i want to make a nice header but i always have to make a circle then delete to make the curve...
possible to round out the line tool?
like make a curve?
cause i want to make a nice header but i always have to make a circle then delete to make the curve...
how to do a dash line on a round button like attachment?
View 5 Replies View RelatedUsing PS7 and the round edge rectangle tool...is there an easy way to save the "selection" as a round edge image?
is there a way to place the rounded corner selection onto a transparent canvas ?
I do not have the time or skills to attempt this without the round edge tool.
I'm working on a lj mood theme and I learned how to create round corners - basically I create a new tranparent image, go to modify - > smooth (5px) and then paste the original image. It works fine!, until I try to add a border using the stroke tool - the corners don't get the border, as you can seehere. I really don't know what I'm doing wrong, if it's a setting or what. I've tried several blending modes, all locations (inside, center, outside), preserve transparency, nothing works. Of course, I'm completely challenged when it comes to photoshop, so I could really use your help on this one.
View 3 Replies View RelatedI have placed a image in illustrator and i tried to put a simple black stroke round it but it doesnt work. what am i doing wrong.
View 3 Replies View RelatedI have drawn hundreds of straight lines with arrowheads (in PSP X2) in the past.But now I need the first time to draw a round line (approx half of a full circle).I tried a couple of variants and expected a three-step-drawing:
First click to place a start node then click a middle node and finally third click the end node.Afterwards I should be able to move the middle node and PSP should complete a round arrow line.But I cannot achieve this.
It happens e.g. always that an area is created and filled with red color.I don't want to fill an area - just one line.What exactly do I have to select in the parameter toolbar for "Mode" "Contour" "Connect segments" "Miter Join",.
I watched a tutorial done by AdvancedTshirts.com that showed 2 options for the Attract and Repel drawing tools. The options were in the Property Bar and one was to set the sharp tip option and the other was to set the round tip option. I'm using v6.2 but they are not there when I select either tool.Also, I have to drag very slowly or it doesn't push or pull the edge.
View 2 Replies View RelatedI am trying to draw a line. Now all of a sudden, there is a stupid arrow. how to do i turn this annoying freature off?
As well, I want to draw multiple lines on one layer, however everytime I draw a line, i get a new layer!
I want to erase the watermark and x mark from a istock image for comping purposes. What is the easiest/fastest way to do this? Clone Stamp/patch tool? If stamp tool, how do you get the tool to delete the x line in a straight line. Mine always copys pixels next to it.
View 2 Replies View RelatedIs there a way to make it so when you're drawing a line you can see how it actually will look like?
On paint it shows exactly how the line looks as ur drawing it,
but on Photoshop it shows some rectangle outline of the line.
The line tool icon has disappeared from the tool bar and I don't know how to re-activate it.
View 2 Replies View RelatedI have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
1. if i draw a line using the line tool.. can i curve it to say 40 degrees like i can with the text function?
2. So ya that one was easy.. hows bout when i want to cut something out ACCURATELY, the pen function, right? (according to a friend)when i make all those little boxes and select the area i want to cut, all that gets copied are the outer lines, which i presume is what ive just drawn.. how do i cut the area inside this?
3. and finally maybe a slightly less easy one- In Paint, when you cut out an object and paste it, you can select for the white of the image to become transparent so you can paste over what you have already.. is thee a feature in PS for this?
I'm trying to use the line tool to draw a colored line, I draw the line via Line tool, it appears in grey, I right click>stroke path and select Pencil > OK, the line is still grey and not the foreground color. If I do the same with a Rectangle Tool, it works fine and darws me a nice colored rectangle. What am I doing wrong? This is driving me nuts...!!
View 1 Replies View RelatedI should be able to apply an effect to a line that has been made with the line tool. Why is this not working?I thought that maybe I might have disabled Effects somehow, but I can't think of anything.
View 9 Replies View RelatedI would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
I'm using GIMP 2.6.11. When I use the line tool and left click + shift to snap a line from point to point, there's no preview line that shows exactly where the line is going to be drawn. In former version(s) of GIMP, I could clearly see where the line was going to be placed because of this feature. I miss it because when doing technical drawings precision and exact angles are needed. Is this feature not included with GIMP 2.6.11? How I can get this tool to work like it used to?
View 2 Replies View RelatedI select the Line tool from the tool box, it won't paint a line, it paints an arrow!
When I select Line Tool the arrow is the default
I don't what happened, but the freaking arrow took over my line. I can't even draw a strait line anymore! I don't know how! If I select the box "Current Tool Only" then ONLY the arrow thing is available.
how to use Photoshop CS, and I have not seen anything regarding the line tool or what it does. I am not trying to do anything specifically, I just want to find out why I get a funky arrowhead shaped thing instead of a line when I try to use it.
View 1 Replies View RelatedI am making an iOS game but whenever I create a line this happens. [URL]....
View 2 Replies View RelatedI am unable to use the line tool.I am using photoshop 7.It was working last 2 years ago on the computer.But now when ever pressing on line tool from the tools box (where pen pencil paint bucket etc are) is displaying a arrow head 10 times as large with a tail behind it?
View 1 Replies View RelatedI am using HP Pavilion g series, Vista window.Using photoshop CS3. Biggest problem i facing that when i type something and i want to go to next line and i press button ENTER. It wont go to next line That means i couldnt write in kind of paragraph. For each line i have to set new layer.
View 4 Replies View RelatedI'm running 13.0.1 right now and am stymied by the line tool UX. The problem stems from the fact that although you feel you are drawing a line, you are actually drawing a box.
Follow these steps running 13.0.1 x64:
Create a new docSelect the Vector Line toolType in a Stroke width (eg: 20px)Draw your lineNotice that the line is still 1px weight.
Of course, after much fiddling around you realize that you need to set the FILL to your stroke colour, your Stroke to NONE and then specify the WEIGHT over in the far right of the control bar.
This really isn't the right UX for drawing lines, particularly if you're coming from any other vector drawing environment.
Some how I have made it so the LINE TOOL is a Thin ARROW. I have no idea how I did it and I really need this reset to how it should be.
I cannot even understand HOW I could have made the Line Tool anything other than the Line as it's the Custom styles where you can select what Custom sytle cursor to use.
which is to make a simple line with the pen tool and have it fill in. When I make three points it connects the first and last to form a triangle, but I'm not trying to make a triangle, I want to make an "L" shape. How can I make it fill just two (or three) points to make a straight line?
View 3 Replies View Relatedwhen i use type tool, i can generate letters, but when i press the enter button to start a new line, then it starts printing backwards. and i cannot place cursor on next line.
what are the leading, baseline, tracking and kerning supposed to be set at for normal display.
all I want is a straight line, but what I get is a big arrow. I've reset the tool to default, and still I get the arrow.
View 9 Replies View RelatedI've managed to break my line tool or something, when i want to use it, it draws a weird arrow and i can't change it.
View 4 Replies View RelatedI'm using a shared computer at a university and we just upgraded to CS6. When I use the line tool while making a mask a box pops up which measures the line's length and angle.
I want to turn it off, and it blocks being able to see what I am trying to mask. I've tried looking this up online and in Photoshop but I just don't know the correct terminolgy, i.e. what to call it, to find out how to turn it off.
here is a jpg screenshot:[URL]....
I am using Photoshop CS5.1 and using the Pen Tool to draw a line. How do I make the line darker?
View 9 Replies View Related