I can't resize my doc window (usually, i can resize from the bottom right corner)or drag around also, the 3 icons ( fr close doc,etc) is missing and I am using mac photoshop cs3 version.
View 3 Replies
How to resize an oversize window?
View 3 Replies View RelatedI can't get the resize window to fit option working. It has worked in the past; I have no idea what changed. I am using Adobe CS4 (11.0.2) on Windows 7 (6.1) 32 bit operating system. I made sure the resize window to fit option is turned on and deleted the preferences file.
View 4 Replies View RelatedI generally like the new scrubby zoom but even with "zoom windows to fit" selected, it does not resize the window when I zoom in.
View 1 Replies View RelatedHow to resize photoshop elements 11 window on mac? no green+ button as off screen. cannot rescale monitor - no option on mac pro.
View 4 Replies View Related Although not a show stopper the bottom part of the merge to HDR window, i.e. the cancel and OK buttons and half of the merged images shown at the bottom of the screen are not visible. Is there any way to have the window resized so that all information shows?
As I said not a show stopper as you can use Esc and Enter and none of the sliders are hidden. The system info is:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
[code]...
In CS3, the document window abutted the palette (panel) stack and expanded automatically when I collapsed the stack. How do I make CS4 (Windows XP) do this?
View 5 Replies View RelatedPhotoshop elements organizer 11 on a Mac 10.8. I cannot resize program window up/down.
View 3 Replies View RelatedI would like to have a shortcut to fit a window (regardless of the image size)
between the tool box on the left and the other pallettes on the right. The only way I do it now is to drag the window to the upper left starting point and then drag the lower right corner to size it.
The window with elements running in partially off the screen and the title bar is not visible. I have tried a number of things but I can not move or resize so that the complete window is visible. I am run elements 12 on a mac air
View 1 Replies View RelatedWhen resizing (either image size or canvas size) I can't tell which numbers I've highlit, as the highlight colour is dark blue on a dark grey background. Is there any way of changing this to something more useful?
PE10 Windows XP SP3
The Application Frame window opens up too tall on both my monitors. I cannot resize it nor access any of the tools at the bottom. Is there any other way to resize it except by grabbing it with the cursor and dragging the edge, since obviously I cannot do that when it sits offscreen?
View 4 Replies View RelatedUsing the zoom tool, there is a check box to select whether a zoom will also "Resize window to fit." Is there a way, using the _keyboard_, to select or toggle whether I want the window to resize when I use the zoom tool? I often want to go back and forth between asking for the resize and prohibiting it, but I don't want to have to go up with the mouse to click on that little check box all the time.
View 4 Replies View Relatedhow to resize my maya window? I can't see my time slider
I accidentally click something while I was doing my blend shapes activity. Now, I need to get back my maya on its normal view with the time slider so that I can work on my animation.
I have a netbook Acer AspireOne D255e, which max resolution is 1024x600. When I try to run GIMP, it's impossible to use it, because all the tools disappear on the window.
Is there the possibility to resize the GIMP window to fit on my screen?
I'm trying to react to the AutoCAD application window being resized, that reaction is to move a form so that it stays in the bottom right hand corner of the AutoCAD application window. However, I cant seem to find a way to react to an AutoCAD application window resize event.
View 1 Replies View RelatedI downloaded Paint.net to resize pics, images, or logos and to create window stickers. However, I am completely new to it all! After playing with it and using it for a few days, I've done a few things with gradients paintbrush and text.
1)When I am placing graphics AND text on a new creation, for some reason I can only add the text FIRST and not AFTER I add any graphics. (So, if I mess up after getting my graphics on there and realize I need my text moved, I gotta start ALL over!
2) Is there any instruction book on the program out there anywhere??? anywhere??? maybe a Paint.net book for Dummies???
3) How do I resize photo's?? How do I work with layers?
4) WHERE is the align tool? (or align object tool.....whatever it's called) I need a simple way to CENTER text and pics.....
The program has been useful to me from what I have learned by hitting the wrong buttons by mistake (lol) but I'm sure there are MUCH better ways to do things than what I've been doing......
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit)
Adobe Illustrator CC 17.1.0 (64 bit)
It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
I have just installed my newly purchased PSC5 extended software. When I try to use the ACR it will load and I can use it but when I try to open, save or cancel my image I cannot. This is because the ACR window is too 'long' for my Sony desktop window and the buttons I am trying to access are in the 'shadow' of the desktop window. When I try to resize the ACR window to access the buttons it will let me adjust it on the vertical window edges but not on the horizontal window edges. I have to reboot the laptop to do anything at all.
View 8 Replies View RelatedAs a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
View 2 Replies View RelatedI modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
The file is attached.
How do I change Gimp from a Multi-window view to a single window view?
View 7 Replies View RelatedIn the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies View RelatedIs there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
I accidently moved my channel window seperately, so there's a box for channels and theres a box for layers/paths.
How do I get it so the layers, paths, and channels are all in one window/box?
Sometimes, when I have two or more drawings open in the same instance of AutoCAD, another tab opens up on the Windows Taskbar. Here's the scenerio; I have two drawings open. On the task bar, Autocad's icon shows two drawings open. Somewhere while drawing, AutoCAD will start bogging down, especially when switching drawings. On the Window's Taskbar, it will now show three drawings open. Two of which will be the same drawing. There will only be two drawings open. The drawing which is currently on top for editing will be the one that shows up twice. If I change to the other drawing, it takes a really long time to swap. Sometimes, it will sit there for a minute and then swap back to the other first drawing on it's own. I try going back to the second drawing again, and the same thing happens again. The only way to stop this from happening is to completely shut down AutoCAD and restart it. I think it has something to do with the ribbon. And I also notice it more often after doing a CopyBase, but not always.
View 1 Replies View RelatedHaving problems resizing images for a website template. Images must be 1275x650. I'm in Cs5. Is there some trick to cropping the image to fit the size without distorting the image.
View 1 Replies View RelatedHow do you do a batch resize in CS4?
View 2 Replies View Related
