I am using Bridge to merge two images into PS as a HDR image. I have done this with multiple images (RAW and TIFF). I am consistently getting screwy results. The image drops almost all detail and a TON of artifacts get dropped in. I am attaching a quick photo which is a brick front of a building.
View 2 RepliesI am starting to learn Photoshop. How to merge two different images in Photoshop?
[URL].......
I'm trying to merge two images in PS CS5 on a mac. They're the same size and everything, but when I try dragging the image across no new layer gets created. When I create a layer and try dragging that I get a message saying the destination file can't accept it.
View 2 Replies View RelatedI have two photo images (from one raw file, one adjust for the foreground, the other under expose to recover the sky):
The rock:
The sky:
(I actually use Linear Burn layer blend mode to get the rock totally black).
Now How to merge these two image together? I try putting the rock image on top and the sky image on bottom, manually selecting the white sky in the rock image and deleting it to show the sky in the layer below. But I end up with halo around the edge of the sky like this:
The closest I get is Different layer blend mode: the rock is correct but the sky gets inverse. What is the trick to get the two merged and not get halo?
I created a composite image using several of my photos. I work using levels and I had one image each on its own level. I needed to merge two images to create the effect that they were one - a running stream was one (a sort of earth tone tint) and a small waterfall cascading over some rocks was the other (a more warmer orange-ish tint). I thought I used a level merge command but when the two levels were merged, the coloring on the images matched (the earth tone tint)! I can't for the life of me remember what I did! I've tried auto-blend but the top image just disappears and photomerge doesn't look familiar.
View 6 Replies View Relatedwhat i have are two images the first image is of me sitting in a chair, this picture has been taken agaist a white background
the second image is just some grass and sky
what i want to happern is overlay me in the chair on the grass how do i extract just me sitting in the chair to put over the grass.
I just took three images of a sunset so that I could create a panorama image. When I use photomerge in photoshop cs6, only two images merge together and the third image is left by itself. I overlapped each image a sufficient amount but I still can't merge the third image.
Here is a screenshot of the end result. Am I not overlapping enough, or is there something I am doing wrong?
i am trying to merge the two images into one smooth one here in photoshop, but cant seem to do it
View 7 Replies View RelatedFor my work, I use a microscope that scans a slide to take an image. It takes around 20 photos and creates a single image, but each one is still clearly visible as an individual image within the overall one, due to shadowing etc. and imperfect alignment of the images. Is there a way to correct this across the whole image, at least to remove the shadowing if not the alignment?
View 3 Replies View RelatedI shot landscape images for a panorama of 4 rows with 6 images in each row. The first image on the top row includes the top of a tree, but the other 5 images only has sky. Photomerge will not merge the 5 images of the top row because it only has sky in the image. I can merge the bottom 4 rows without a problem and can include the first image on the top row, but not the others.
View 3 Replies View RelatedI attempted to search but didn't find much on the topic. I'm using Photoshop 7.0, I believe. I did find a tutorial for 5.5 on the 'net somewhere, but it didn't seem to help as some of the exact commands/tools may have changed.
Anyway I'm attempting to superimpose 2 images (same pixel size) that I have used layer properties to make semi-transparent, and I'd like to copy/paste one of them into the other one, and then make it so that you can see both, as they are both transparent ....
How do I merge several images. I am trying to add a map to a slide show and the original is larger than my scanner. I have a considerable overlap.
View 1 Replies View RelatedThis is an embarrassing question as i'm sure it's a basic photoshop tool, but I can't figure out how to take crops out of images, and merge them together to form one photo.
I have 4 photos of individual people, and I want to take equal 'slices' of them to merge into one- but still keeping the image the same size as a photo.
I know that my photo sizes are 3543px by 2362 px, and I know how to crop the images to the right size (885.75px by 2362px) but how to combine them.
Should I be using layers? I'm using CS4
This is probably a really basic one - and I'm sure I've read how to do this here before in a really simple way, but I can't re-find the post after some time searching: I have two photos side by side on two different layers, and I simply want to create a fade between one and the other over an overlapping area of about 10mm. I have tried selecting one layer, and using the gradient tool, but I am doing something wrong as this seems to affect all layers; ie it works fine on one layer, but the other layer gets faded out too. I'm sure I have to create a new layer or something and perform the gradient on that, or maybe I have the wrong gradient settings.
Or do I process both photos in separate files, and then bring them in to a new file and overlap them?
I would like to ask about adding one image to another such that
both images show together.
I don't know the jargon for that type of thing.
I had an older program named "PhotoSuite" v 3.5 (outdated now) that would
paste images on top of another image allowing both to add together.
I think they called it 'Transparent paste'.
Can I do that in PhotoShop?
I have a registered copy of PhotoShop 5.0 Lite.
how to import layers? I need to merge two images together, but they are on seperate files and so on seperate layers, how can i put these two images onto one file?
View 1 Replies View RelatedHDR pro in CS6 keeps on giving me a black screen whenever I try to merge images.
View 1 Replies View RelatedWhy doesn't CS2 photoshop do a copy paste when you want to merge 2 images liek it does in CS3 photoshop. I can never print screen the image to start off in CS2 photoshop.
View 1 Replies View Relatedi want to make colag..i hv edited multiple images individually..but unable to merge these photos into one common window in order to make colage..
View 5 Replies View RelatedIs it possible to merge two images, each as a layer into an image file?
View 1 Replies View RelatedPossible to merge layered images in Illustrator CS3?
I'm used to doing it with Photoshop. I thought the merge in Pathfinder would work but apparently not
I want to make id cards, I use coreldraw x4 and use Microsoft Office to create a merge.A single sheet of A4 size paper I printed 10 id cards with different identities and different photo. Whether it can be made ​​in Corel merge different images by using an add-in that is not paid or free? If there is where can I download?
View 1 Replies View Relatedmerge a number of images overlaying each other then using compound paths to make one image.
View 5 Replies View Related I have two machines running LR3, a mac laptop and a windoze desktop. Both are using local disk and a central NAS. All files use sidecar (XMP) files.
Â
Frequently I'll copy my pictures directory over to the NAS to back it up or, if I'm upgrading the big windoze box, I'll copy it's images over to the NAS in a different directory. I've also been known to prune the local folders since I know they're backed up and because I need the space for a project. This creates a situation where one folder on the NAS may have duplicate subfolders (say "2008 May") same as the notebook but may also have folders (say "2008 November") that don't exist on the notebook.
Â
I could live happily with this mess except that now I want to make one big master catalog of ALL the images on the NAS, minus the duplicates. In other words, I want to clean stuff up.
Â
If I just import the photos (as opposed to the catalog) I get the duplicates removed but then I lose all the collection sets and previews. If I import the catalogs then I get the collections and previews but I also get duplicates.
Â
What I want is either a tool, or a means in LR3 to eliminate (or merge) the duplicates.
Â
It could be an external file utility that compares two directories and eliminates the duplicates (followed by a LR3 catalog cleanup of missing files) or a way to import the catalogs, remove the duplicate entries and then export as a single file structure.
I have PS 12.05 64bit version on a Mac with 8 gigs of Ram and a QuadCore I7. I have tried using 3 NEF images, tried DNG images and JPG images, I end up with the same result, a murkey grey image. Hopefully the screen shot will come through showing my results. I have reset Pref file in PS, still the same.
View 8 Replies View RelatedPhotoshop CS2, I have two images (ImageA and ImageB),2) I want to place ImageB onto a canvas with ImageA - this I can do,3) When I place ImageB onto the canvas and nudge it to ImageA, I want the RIGHT side of ImageA to Blend/Merge/Feather with the LEFT side of ImageB. The result is that I do not want to see the edges of either images when they are nudged together. I'd like them to "Flow" together. Also, I'd like to be able to put a "Glow Around" then entire merged content, but Ithink I have a link that explains this. I am not sure of the terminology above - Blend/Merge/Feather
View 5 Replies View RelatedI've recently discovered that when using the Merge to HDR function the resulting image is 72 dpi as opposed to the 240dpi of the original files used to create the 32 bit image. I've tried using both psd and RAW files with the same result. Others have confirmed this does not happen on the Mac version of CS3. I am using CS2 but others in a class I am taking have experienced similar problems with CS3 running on Windows. I'm running XP Pro which has been kept up to date. CS2 also has all updates installed.
Apparently, PS is also resizing the image to a relatively huge document size in the process of converting my bracketed images to HDR while retaining the correct pixel dimensions. The work around is to uncheck the "Resample Image" box within the "Image Size" dialog window after conversion so as to restore a 240 dpi resolution but this adds yet another step to the workflow.
I have problem with multiple raster images.I can not marge them.You can see problem in picture.
View 1 Replies View RelatedHow do i merge one picture into another and then save it? How do i save images to clipboard?
I have noticed you can change the background colors.What if i want to use an image as a background instead?
I've downloaded some texture maps of Earth and Mars that consist of a number of JPG images that are all 1024 pixels square. What I want to do, and I've tried and failed so far, is to combine the separate images to make one big map of the planet surfaces. I assume this will be possible by tiling the images.
I've had a google around but can't find any tutorials related to combining sections of a map together.
When I try to merge to HDR pro, the entire photo becomes black. It is still the same photo because when I increase the exposition I can almost make out the original photo. I tried to work on the exposition of the three photos, but that didn't work. I tried everything that I read on the Adobe Forum, but nothing is working. Up until about a month ago, it was working perfectly. I have photoshop cs6 with the latest upgrades and a Mac OS X Version 10.7.5 with 3.4 GHz and 32 GB ram.
View 4 Replies View Related