I want to make id cards, I use coreldraw x4 and use Microsoft Office to create a merge.A single sheet of A4 size paper I printed 10 id cards with different identities and different photo. Whether it can be made in Corel merge different images by using an add-in that is not paid or free? If there is where can I download?
View 1 Replies
I'm needing to merge a bunch of layers dozens of drawings.
original layers..
A-CL-E
A-CL-N
A-CL-X
new layer
A-CL
now i have to go through dozens of layers. that have that same format..
i.e. :
layername1-E
layername1-N
layername1-X
merge to layername1
ideally, a routine that says all layers named LAYER1* MERGE TO LAYER1
I am trying to make business cards in Adobe Illustrator using the Pantone Color System. In my logo, the middle circle is a dark grey: C20 Y20 M20 K80. I can't find a suitable Pantone grey that is this dark. Pantone 425U is too light. Also, which Pantone Black is the darkest?
View 21 Replies View RelatedWhy cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
I'm working on a business card project and I want to put three cards on one pace with crop marks on each card. How can I do it? I only know to put crop marks when saving to PDF or exporting to printer and on one individual element on the page.
I want to have those three cards with crop marks, and on one page.
I am preparing some business cards and wish to include a couple of email address as text not as blue, underlined links. They keep showing up as links and I can't seem to find a way of making them just text. I'm rather new at this
View 10 Replies View RelatedIn page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
I am still using Coreldraw X3 I will be purchasing X5 next month. I need to know how to make a greeting card in X3.
View 1 Replies View RelatedDesigned a business card and want to print to Avery type sheet cards and can't find the Avery selection in my printer settings. Just learnig CD X3
View 8 Replies View RelatedOS WinXP and Win Vista 64 bit.
To print business cards, I selected Label AVERY 5371 - 2X 3.5 BusCr. Print preview looks good. There is no any visible alignment problems.
When printing is completed (Linen paper AVERY 5371), there is about 2 millimeters alignment problem for each card. I created my own template and the print is with the same results. The printer I use is Canon MP830 ink jet.
I have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
View 5 Replies View RelatedI am making new business cards using CorelDraw. When I save the business card to a PDF file and download it to Vistaprint, the text does not look sharp as it does in CorelDraw. Is there a way to download without being blurry?
View 7 Replies View Relatedwhere I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies View RelatedI am starting to learn Photoshop. How to merge two different images in Photoshop?
[URL].......
I'm trying to merge two images in PS CS5 on a mac. They're the same size and everything, but when I try dragging the image across no new layer gets created. When I create a layer and try dragging that I get a message saying the destination file can't accept it.
View 2 Replies View RelatedI have two photo images (from one raw file, one adjust for the foreground, the other under expose to recover the sky):
The rock:
The sky:
(I actually use Linear Burn layer blend mode to get the rock totally black).
Now How to merge these two image together? I try putting the rock image on top and the sky image on bottom, manually selecting the white sky in the rock image and deleting it to show the sky in the layer below. But I end up with halo around the edge of the sky like this:
The closest I get is Different layer blend mode: the rock is correct but the sky gets inverse. What is the trick to get the two merged and not get halo?
I created a composite image using several of my photos. I work using levels and I had one image each on its own level. I needed to merge two images to create the effect that they were one - a running stream was one (a sort of earth tone tint) and a small waterfall cascading over some rocks was the other (a more warmer orange-ish tint). I thought I used a level merge command but when the two levels were merged, the coloring on the images matched (the earth tone tint)! I can't for the life of me remember what I did! I've tried auto-blend but the top image just disappears and photomerge doesn't look familiar.
View 6 Replies View Relatedwhat i have are two images the first image is of me sitting in a chair, this picture has been taken agaist a white background
the second image is just some grass and sky
what i want to happern is overlay me in the chair on the grass how do i extract just me sitting in the chair to put over the grass.
I just took three images of a sunset so that I could create a panorama image. When I use photomerge in photoshop cs6, only two images merge together and the third image is left by itself. I overlapped each image a sufficient amount but I still can't merge the third image.
Here is a screenshot of the end result. Am I not overlapping enough, or is there something I am doing wrong?
i am trying to merge the two images into one smooth one here in photoshop, but cant seem to do it
View 7 Replies View RelatedFor my work, I use a microscope that scans a slide to take an image. It takes around 20 photos and creates a single image, but each one is still clearly visible as an individual image within the overall one, due to shadowing etc. and imperfect alignment of the images. Is there a way to correct this across the whole image, at least to remove the shadowing if not the alignment?
View 3 Replies View RelatedI shot landscape images for a panorama of 4 rows with 6 images in each row. The first image on the top row includes the top of a tree, but the other 5 images only has sky. Photomerge will not merge the 5 images of the top row because it only has sky in the image. I can merge the bottom 4 rows without a problem and can include the first image on the top row, but not the others.
View 3 Replies View RelatedI attempted to search but didn't find much on the topic. I'm using Photoshop 7.0, I believe. I did find a tutorial for 5.5 on the 'net somewhere, but it didn't seem to help as some of the exact commands/tools may have changed.
Anyway I'm attempting to superimpose 2 images (same pixel size) that I have used layer properties to make semi-transparent, and I'd like to copy/paste one of them into the other one, and then make it so that you can see both, as they are both transparent ....
I am using Bridge to merge two images into PS as a HDR image. I have done this with multiple images (RAW and TIFF). I am consistently getting screwy results. The image drops almost all detail and a TON of artifacts get dropped in. I am attaching a quick photo which is a brick front of a building.
View 2 Replies View RelatedIs it possible to merge two images, each as a layer into an image file?
View 1 Replies View RelatedPossible to merge layered images in Illustrator CS3?
I'm used to doing it with Photoshop. I thought the merge in Pathfinder would work but apparently not
How do I merge several images. I am trying to add a map to a slide show and the original is larger than my scanner. I have a considerable overlap.
View 1 Replies View RelatedThis is an embarrassing question as i'm sure it's a basic photoshop tool, but I can't figure out how to take crops out of images, and merge them together to form one photo.
I have 4 photos of individual people, and I want to take equal 'slices' of them to merge into one- but still keeping the image the same size as a photo.
I know that my photo sizes are 3543px by 2362 px, and I know how to crop the images to the right size (885.75px by 2362px) but how to combine them.
Should I be using layers? I'm using CS4
This is probably a really basic one - and I'm sure I've read how to do this here before in a really simple way, but I can't re-find the post after some time searching: I have two photos side by side on two different layers, and I simply want to create a fade between one and the other over an overlapping area of about 10mm. I have tried selecting one layer, and using the gradient tool, but I am doing something wrong as this seems to affect all layers; ie it works fine on one layer, but the other layer gets faded out too. I'm sure I have to create a new layer or something and perform the gradient on that, or maybe I have the wrong gradient settings.
Or do I process both photos in separate files, and then bring them in to a new file and overlap them?
I would like to ask about adding one image to another such that
both images show together.
I don't know the jargon for that type of thing.
I had an older program named "PhotoSuite" v 3.5 (outdated now) that would
paste images on top of another image allowing both to add together.
I think they called it 'Transparent paste'.
Can I do that in PhotoShop?
I have a registered copy of PhotoShop 5.0 Lite.
