Photoshop :: Merge Two Images
Jul 2, 2008
I created a composite image using several of my photos. I work using levels and I had one image each on its own level. I needed to merge two images to create the effect that they were one - a running stream was one (a sort of earth tone tint) and a small waterfall cascading over some rocks was the other (a more warmer orange-ish tint). I thought I used a level merge command but when the two levels were merged, the coloring on the images matched (the earth tone tint)! I can't for the life of me remember what I did! I've tried auto-blend but the top image just disappears and photomerge doesn't look familiar.
View 6 Replies
ADVERTISEMENT
Aug 20, 2013
I am starting to learn Photoshop. How to merge two different images in Photoshop?
[URL].......
View 1 Replies
View Related
Apr 16, 2012
I'm trying to merge two images in PS CS5 on a mac. They're the same size and everything, but when I try dragging the image across no new layer gets created. When I create a layer and try dragging that I get a message saying the destination file can't accept it.
View 2 Replies
View Related
Jul 19, 2008
I have two photo images (from one raw file, one adjust for the foreground, the other under expose to recover the sky):
The rock:
The sky:
(I actually use Linear Burn layer blend mode to get the rock totally black).
Now How to merge these two image together? I try putting the rock image on top and the sky image on bottom, manually selecting the white sky in the rock image and deleting it to show the sky in the layer below. But I end up with halo around the edge of the sky like this:
The closest I get is Different layer blend mode: the rock is correct but the sky gets inverse. What is the trick to get the two merged and not get halo?
View 2 Replies
View Related
Feb 15, 2006
what i have are two images the first image is of me sitting in a chair, this picture has been taken agaist a white background
the second image is just some grass and sky
what i want to happern is overlay me in the chair on the grass how do i extract just me sitting in the chair to put over the grass.
View 3 Replies
View Related
Jan 29, 2013
I just took three images of a sunset so that I could create a panorama image. When I use photomerge in photoshop cs6, only two images merge together and the third image is left by itself. I overlapped each image a sufficient amount but I still can't merge the third image.
Here is a screenshot of the end result. Am I not overlapping enough, or is there something I am doing wrong?
View 1 Replies
View Related
Oct 1, 2012
i am trying to merge the two images into one smooth one here in photoshop, but cant seem to do it
View 7 Replies
View Related
Aug 29, 2011
For my work, I use a microscope that scans a slide to take an image. It takes around 20 photos and creates a single image, but each one is still clearly visible as an individual image within the overall one, due to shadowing etc. and imperfect alignment of the images. Is there a way to correct this across the whole image, at least to remove the shadowing if not the alignment?
View 3 Replies
View Related
Aug 15, 2012
I shot landscape images for a panorama of 4 rows with 6 images in each row. The first image on the top row includes the top of a tree, but the other 5 images only has sky. Photomerge will not merge the 5 images of the top row because it only has sky in the image. I can merge the bottom 4 rows without a problem and can include the first image on the top row, but not the others.
View 3 Replies
View Related
Jul 11, 2006
I attempted to search but didn't find much on the topic. I'm using Photoshop 7.0, I believe. I did find a tutorial for 5.5 on the 'net somewhere, but it didn't seem to help as some of the exact commands/tools may have changed.
Anyway I'm attempting to superimpose 2 images (same pixel size) that I have used layer properties to make semi-transparent, and I'd like to copy/paste one of them into the other one, and then make it so that you can see both, as they are both transparent ....
View 4 Replies
View Related
Jan 2, 2008
I am using Bridge to merge two images into PS as a HDR image. I have done this with multiple images (RAW and TIFF). I am consistently getting screwy results. The image drops almost all detail and a TON of artifacts get dropped in. I am attaching a quick photo which is a brick front of a building.
View 2 Replies
View Related
Oct 22, 2012
How do I merge several images. I am trying to add a map to a slide show and the original is larger than my scanner. I have a considerable overlap.
View 1 Replies
View Related
Apr 19, 2011
This is an embarrassing question as i'm sure it's a basic photoshop tool, but I can't figure out how to take crops out of images, and merge them together to form one photo.
I have 4 photos of individual people, and I want to take equal 'slices' of them to merge into one- but still keeping the image the same size as a photo.
I know that my photo sizes are 3543px by 2362 px, and I know how to crop the images to the right size (885.75px by 2362px) but how to combine them.
Should I be using layers? I'm using CS4
View 9 Replies
View Related
Dec 16, 2007
This is probably a really basic one - and I'm sure I've read how to do this here before in a really simple way, but I can't re-find the post after some time searching: I have two photos side by side on two different layers, and I simply want to create a fade between one and the other over an overlapping area of about 10mm. I have tried selecting one layer, and using the gradient tool, but I am doing something wrong as this seems to affect all layers; ie it works fine on one layer, but the other layer gets faded out too. I'm sure I have to create a new layer or something and perform the gradient on that, or maybe I have the wrong gradient settings.
Or do I process both photos in separate files, and then bring them in to a new file and overlap them?
View 1 Replies
View Related
May 21, 2006
I would like to ask about adding one image to another such that
both images show together.
I don't know the jargon for that type of thing.
I had an older program named "PhotoSuite" v 3.5 (outdated now) that would
paste images on top of another image allowing both to add together.
I think they called it 'Transparent paste'.
Can I do that in PhotoShop?
I have a registered copy of PhotoShop 5.0 Lite.
View 4 Replies
View Related
Feb 28, 2005
how to import layers? I need to merge two images together, but they are on seperate files and so on seperate layers, how can i put these two images onto one file?
View 1 Replies
View Related
May 19, 2012
HDR pro in CS6 keeps on giving me a black screen whenever I try to merge images.
View 1 Replies
View Related
Jul 18, 2009
Why doesn't CS2 photoshop do a copy paste when you want to merge 2 images liek it does in CS3 photoshop. I can never print screen the image to start off in CS2 photoshop.
View 1 Replies
View Related
Jun 7, 2013
i want to make colag..i hv edited multiple images individually..but unable to merge these photos into one common window in order to make colage..
View 5 Replies
View Related
Jul 19, 2013
Is it possible to merge two images, each as a layer into an image file?
View 1 Replies
View Related
Jul 1, 2009
Possible to merge layered images in Illustrator CS3?
I'm used to doing it with Photoshop. I thought the merge in Pathfinder would work but apparently not
View 5 Replies
View Related
Jan 13, 2013
I want to make id cards, I use coreldraw x4 and use Microsoft Office to create a merge.A single sheet of A4 size paper I printed 10 id cards with different identities and different photo. Whether it can be made ​​in Corel merge different images by using an add-in that is not paid or free? If there is where can I download?
View 1 Replies
View Related
Oct 12, 2012
merge a number of images overlaying each other then using compound paths to make one image.
View 5 Replies
View Related
Nov 20, 2011
I have two machines running LR3, a mac laptop and a windoze desktop. Both are using local disk and a central NAS. All files use sidecar (XMP) files.
Â
Frequently I'll copy my pictures directory over to the NAS to back it up or, if I'm upgrading the big windoze box, I'll copy it's images over to the NAS in a different directory. I've also been known to prune the local folders since I know they're backed up and because I need the space for a project. This creates a situation where one folder on the NAS may have duplicate subfolders (say "2008 May") same as the notebook but may also have folders (say "2008 November") that don't exist on the notebook.
Â
I could live happily with this mess except that now I want to make one big master catalog of ALL the images on the NAS, minus the duplicates. In other words, I want to clean stuff up.
Â
If I just import the photos (as opposed to the catalog) I get the duplicates removed but then I lose all the collection sets and previews. If I import the catalogs then I get the collections and previews but I also get duplicates.
Â
What I want is either a tool, or a means in LR3 to eliminate (or merge) the duplicates.
Â
It could be an external file utility that compares two directories and eliminates the duplicates (followed by a LR3 catalog cleanup of missing files) or a way to import the catalogs, remove the duplicate entries and then export as a single file structure.
View 3 Replies
View Related
Jul 25, 2012
I have problem with multiple raster images.I can not marge them.You can see problem in picture.
View 1 Replies
View Related
Oct 3, 2011
How do i merge one picture into another and then save it? How do i save images to clipboard?
I have noticed you can change the background colors.What if i want to use an image as a background instead?
View 4 Replies
View Related
Nov 4, 2012
I've downloaded some texture maps of Earth and Mars that consist of a number of JPG images that are all 1024 pixels square. What I want to do, and I've tried and failed so far, is to combine the separate images to make one big map of the planet surfaces. I assume this will be possible by tiling the images.
I've had a google around but can't find any tutorials related to combining sections of a map together.
View 7 Replies
View Related
Feb 26, 2013
Why cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.Â
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
View 3 Replies
View Related
Aug 18, 2013
I have about 900 raw files on an external drive. I edited those files using my master catalog using a laptop while still travelling. When I got home, I copied the master catalog from the external drive to the desk top, then opened the master catalog on my desktop. I can see the edited images on the external drive. So far so good.
Â
I want to copy (add) the edited images to my desk top. I tried to export the images as a new catalog and then import it into the desire location on my desktop drive. However, LR5 does not allow that. I get this message: "There is nothing new in the catalog you have selected. All of the catalog's photos are up to date in this catalog." Yes, but the edited images are not on my desktop.....
Â
I also tried to Import from the external drive and then Copy the files to the desktop, but then I lose all of the work done in the develop module and the keywords.
Â
I watched Kost's LR 3 video on merging catalogs, but she dodges the question of how to deal with this issue since the "merge" is within the same catalog.I'm using LR5 with Windows 7.
View 4 Replies
View Related
Sep 4, 2012
For what I need Photoshop for, I use CMD-E all the time to create raster graphics from vector shapes. I often use this feature to combine shape layers to create buttons. So, this completely destroys my work flow. The only work around I've found is to create an additional raster layer to merge with the vector layers.Â
View 7 Replies
View Related
Nov 18, 2013
When I try to merge images to HDR Pro in my new MacBook Pro (Mavericks), when the HDR window comes up, the image is missing about 40% of the middle of the image (it's white). If I try to resize the image, it gets all mixed up. I could not reproduce this on my Windows machine.Â
View 2 Replies
View Related
