Photoshop :: Delete, Clone And Paint Tools Do Not...

Jul 22, 2009

i have photoshop cs3 running on windows xp.  the delete, clone and paint tools do not work on any layer.  (other tools do work. susch as red eye removal) .  the layers are not locked.  i have used these tools on many many occasions.  they just stopped working.   i have tried: resetting the tool preferences to their defaults, restarted my computer, restarted photoshop.  i hope to avoided having to re-install cs3. 

View 4 Replies


Corel PHOTO-PAINT X3 :: Effect / Paint Or Clone Tools Won't Work In Image

May 27, 2011

i'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing...  i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..

View 2 Replies View Related

Corel PHOTO-PAINT X3 :: Clone And Paint Tools Inoperative?

Jun 23, 2011

I recently had a computer virus.   The hard drive was scrubbed, and we had to reinstall all our programs.

Now, on my CorelDraw X3 graphics suite, the photo paint program is only partially functional.  The clone and paint tools do not work anymore.   I have uninstalled and reinstalled a couple of times, rebooted the computer, but no progress.   We have Windows XP, the same as before.

View 4 Replies View Related

AutoDesk Smoke :: How To Use Clone Brush In Paint Through Tools Menu

Jul 27, 2012

I am trying to use the clone brush in paint through the tools menu.

View 1 Replies View Related

Photoshop :: Clone Stamp Switches To Other Tools?

Aug 1, 2013

Photoshop cc. I am having trouble with the clone stamp tool, it will often change back to the tool I was using before it when I try to change the size of the brush. It will sometimes happen when I go to use the hand tool (space bar short cut) it will go into the hand tool navigator mode (space+H) and then jump back to the previously used tool when I let go?

View 5 Replies View Related

Photoshop :: Some Of The Tools Like Paintbrush, Clone Etc Doesn't Work

Sep 20, 2006

I've got this problem with Photoshop. Some of the tools, e.g. paintbrush, clone, just don't work. Using alt click to select the colour/area works but the tool just doesn't work on the image. Any ideas?

View 5 Replies View Related

Photoshop :: CS6 Hangs When Using Clone Stamp / Healing Brush Tools On Mac

May 27, 2012

I am having a big problem when using the new CS6 on my Mac (os x 10.7.4). When switching to a new tool, like a brush, or clone stamp, or healing brush etc, Photoshop hangs for about 20 seconds before resuming. It's not 3rd party plug-ins, because I get the same behaviour when I run using the shift key and third party plug-ins are disabled. It doesn't happen every time, but it happens frequently.

View 301 Replies View Related

Photoshop :: Clone, Brush, Burn-dodge Tools Don't Work

Aug 22, 2005

Photoshop 7. Clone tool (etal) won't work. I've verified I am in RGB mode, and the 'Aligned' box is unchecked. Since the background layer is locked, I duplicated the background and tried working in the unlocked layer. Still no luck. These tools were working fine before, and sometimes when I open PS they do. Other times, like now, they are inaccessible.

View 5 Replies View Related

Photoshop Elements :: Clone Stamp And Some Other Tools Not Working Correctly?

Feb 15, 2013

I have some problems with th CLONE STAMP TOOL at the right hand. Sometimes it works and sometimes it doesnt. I do the correct thing: I press ALT-button, the click.
I have also noticed that this also is a problem when I use the BURN and DODGE tool. Sometimes it works and sometimes it doesnt.

View 24 Replies View Related

Photoshop :: CS3 Shift-Clone/Paint

Feb 27, 2008

Windows Vista Home Premium, 2GB RAM, 200GB free HDD space, HP Laptop
Adobe Photoshop CS3 (with/without 10.0.1 patch)
Epson Stylus Pro 4800 via TCP/IP connection

I am still having the following three problems:

1. When holding down the shift key and clicking near the edge of the screen with a paint/clone/repair brush, the screen jumps to another area of the image (light years away it seems) - PS7 and CS2 moved a fraction of an inch in comparison.

2. When printing to the Epson Stylus Pro 4800, no matter how many copies I indicate that I want, I'll inevitably get more...sometimes many more. From my other PC, a dual P3 with 4GB of RAM running Win2KPro and PSCS2, this does not happen (using same file).

3. If I close a file that is showing full-window (not necessarily full-screen), and another image is still waiting to be worked on in the background, the full-window image does not change when the file closes, but the navigator version of the image changes to the next image waiting in the background. I have to resize the window to force a rewrite of the screen with the correct image.

View 1 Replies View Related

Photoshop :: C6 / Clone Tool Stamp Will Not Paint From Sample Area

Oct 31, 2013

I am using PSC6 and the clone tool stamp will not paint from the sample area. After holding down the alt key to obtain sample it will  not paint.  I can hold the sample over the area to paint & see the cloned area visually, but it will not paint when I click. however if I click many multiple times I get a faded clone.

View 1 Replies View Related

Photoshop Elements :: Could Not Use Clone Stamp Tool Because Area To Clone Has Not Been Defined

Nov 23, 2013

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.

View 1 Replies View Related

Photoshop Elements :: Change From Clone Pattern To Clone Stamp?

Feb 12, 2014

How do I change from clone pattern to clone stamp

View 1 Replies View Related

Paint.NET :: Clone Tool Alignment?

Jul 13, 2013

often while using the clone tool some of what I am trying to remove is placed just above where I am there an alingment that needs to be done?

View 1 Replies View Related

Paint Shop Pro :: X4 Clone Tool Crash?

Jan 21, 2012

PaintShop Pro X4 SP1 I've had this happen a few times before, but now it's beyond a joke, in that any time now I attempt to use the Clone tool, an empty script error message presents, and PSP is either frozen dead or just vanishes from the screen.

Win XP Event Viewer reports: Faulting application corel paintshop pro.exe, version, faulting module corecmd.dll, version, fault address 0x0000dd54.

FWIW. PSP X2U on the same machine works its clone tool okay.

Ah well! back to a JASC version of PSP 9 that does actually work for more than part time use.

View 14 Replies View Related

Paint.NET :: Semi-transparency And Clone Stamp

Jul 5, 2012

I tried searching things like "semi-transparency" and "clone stamp", but was unable to turn up any search results relevant.

Essentially, the problem is that I have a semi-transparent image, and I need to clone some of that image and graft it onto the same image. Unfortunately, when I use the clone stamp, it doesn't seem to properly copy the transparency.

Here is the image in question: [URL] ...........

(Actually, this isn't the REAL image in question - the real image is actually a .dds file, a texture - an inventory screen in particular - for a game I'm trying to edit. Not sure if that makes a difference.)

As you can see, (most of) the (insides of the) boxes are semi-transparent. What I'm trying to do is somewhat extend the very bottom left box to be exactly 33% wider, and also somewhat extend the very bottom right box, (how much, haven't figured out). Those are where items would normally be located, but unfortunately, they are sometimes not big enough for a particular item or particular amount of items that I'm trying to fit in them and they both need to be a little bit longer. However, I am no artist. What I thought I'd try to do was use the clone stamp on them to simply extend them, (and cover up any obvious duplication). But when I attempt to use the clone stamp, all the transparency goes away and I'm left with solid colors, which is not good. I tried using Photoshop to do this, but Photoshop has no official support for texture files and the available plugin for them does not handle transparency correctly and screws up the entire thing as well, even if it looks correct while editing it. I also tried using GIMP, but GIMP doesn' something correctly, (what's wrong, I can't remember - doesn't matter). displays exactly what you see in game, but unfortunately I can't figure out how to use the proper tools to actually edit it to my needs.

View 3 Replies View Related

Paint.NET :: Clone Stamp With Soft Edge

Nov 24, 2011

I've been using Paint.NET. I've installed a plugin or two, and I'm very happy with the results I'm getting. But one problem is bugging me, and I can't seem to figure out how/if Paint.NET has a way to meet this need.

I want to be able to use the clone stamp tool with a soft edge rather than a sharp dividing line. I was thinking this might be doable with a custom brush, but after a bit more reading, I don't think it can. Is there a way to clone with a soft/feathered edge?

View 4 Replies View Related

Photoshop :: CC - Paint Tools Is Lagging Horribly?

Sep 12, 2013

I'm in trouble with the new Adobe Photoshop CC. I got 4 PC workstations with windows 7 SP1, SSD drive, bi-xeon E5-2630 64 Go ram, Geforce GTX 780 with the last driver 320.49. We use the performance default settings : The graphic card is detected by photoshop "use graphics processor" is checked "drawing mode" = advanced
But the paint tools is lagging horribly. We prefer use our old stations (3 years old) with photosop CS5 which are completely smooth with the same brush and the same picture size (2048x2048, nothing crazy) I did the 14.1.1 update but nothing change.

View 14 Replies View Related

Photoshop :: Disappearing Tools - Paint Bucket

May 15, 2004

I'm a relative newbie to Photoshop and recently upgraded from 5.5 -> 6.0 (yep I'm new and already behind ). For some reason the Paint Bucket tool does not show up in the Toolbox and I can't figure how to find it. I know its still there because its in the help and I tried all the Shortcuts trying to make it show up but no good. Any ideas how to find the Paint Bucket tool and better yet how do I make it permanent part of the Toolbox again.

View 2 Replies View Related

Corel PHOTO-PAINT X6 :: Resetting The Clone Tool

Jun 7, 2013

I've used the Clone Tool a lot over the years but I've never worked out how to reset the source point without having to go back to the clone tool. I know a right click resets but it defaults to the position of the clone (why?), so I usually have to right click at least twice.

View 16 Replies View Related

Paint Shop Pro :: X4 - Clone Tool Options Missing

Sep 18, 2011

I cannot seem to find the clone tool options in the EDIT TAB. I have used PSP from version 7 through version X2. Normally when you click on the clone tool a series of options appear in the upper left hand corner near the pull down menus. One of the options is the ability to adjsut the size of the clone tool. These tool adjustment options are missing in version X4. Interestingly, the tool options are available in the Adjust tab.

View 2 Replies View Related

Paint Shop Pro :: Unable To Use Clone Tool Properly

Dec 25, 2011

I've never been able to use the Clone tool properly in PSP.You can see that the cloning is blotchy and just isn't right...

View 10 Replies View Related

Paint Shop Pro :: Can't Increase Clone Brush Size

Jun 1, 2011

PSPRo X.I have lost the ability to increase the size of the clone brush either by the presets or by the mouse and keyboard.It will not show by more than about one eighth of an inch square .

View 2 Replies View Related

AutoDesk Smoke :: Clone Tool To Paint Out A Fly In Some Footage

Aug 10, 2012

I was wanting to try out the clone tool to paint out a fly in some footage I have, but I can't get the clone tool to grab a sample region. I hold down ctrl and click where I want to sample from, but the green circle doesn't appear. I can do it by manually offsetting it with the x and Y position, but I'd like to do it with my pen.

View 3 Replies View Related

Paint.NET :: Clone Plugin That Has Opacity And Spray Settings

Sep 3, 2013

The clone stamp does not seem one quarter as good as the photoshop clone tool.
Is there a clone plugin that has opacity and spray settings.
While I am asking, is there a airbrush spray plugin for

View 4 Replies View Related

Paint.NET :: Anchor Clone Stamp So It Stays In One Place

Dec 31, 2011

Is there a way to anchor the Clone Stamp so it stays in one place as you move your mouse to clone over other areas??

As I click, it moves along with the mouse.

View 6 Replies View Related

Corel PHOTO-PAINT X6 :: Using Clone Tool - Cursor Misalignment

Dec 17, 2012

When trying to use the clone tool, my initial cursor locations (as picked by me) appears to be about 200 pixels off. I have updated video drivers and mouse drivers to no avail. There was a posting some time back about the same issue, but it seems to be unresolved. The solution was to remove code from the registry.

View 2 Replies View Related

Photoshop :: Filter Set Like Xaos Tools / Paint Alchemy / Terrazo

Jan 31, 2011

I have need for some of the effects of Paint Alchemy and especially Terrazo. Any OS X filter set that does what those filters did?

I know there was an OS X version available for a while, but now I can't find anything.

View 50 Replies View Related

Photoshop :: 5.5 - Eraser And Paint Tools Not Using Entire Diameter Of Brush

Apr 19, 2012

All brushes have been reset and are set the same. We are running CS5.5 Master Edition on a brand new 27" iMac 3.4 ghz Intel Core i7 Quad core using a Radeon AMD HD6970M.
This is a sample of how the tool is not using the entire diameter. This could be either erasing or painting a color.

View 2 Replies View Related

Paint.NET :: Clone Stamp Multiple Times (without Going Back To Original Area)

Jun 1, 2011

I press control Clone stamp, click on the area I want

I then let go and click another area to clone

Is it possible to clone multiple times (without going back to the original area)

View 2 Replies View Related

Lightroom :: Paint With Clone Tool Out-of-Canvas Areas Created By Perspective Correction

Oct 29, 2013

In Lightroom 5 I really like the Perspective Correction tool which always produces white Out-of-Canvas areas as a result of image deformation.As a "constain crop" very often would cut out a lot of interesting details, I love to Crop the image a bit wider.The problem are the white areas remaining that were not present in the original, undistorted image.I would love to fill them in with the Clone Tool, but it does not seem to work on those areas!
To make a complicated story simple just look at this image:My aim here is to fill in the bottom left white by simply cloning the missing part of the column.This is a super-easy job which I could do with Lightroom clone tool in seconds. Shall I report it as a BUG? (if so, how?)

View 5 Replies View Related

Copyrights 2005-15, All rights reserved