Paint Shop Pro :: X4 Clone Tool Crash?
Jan 21, 2012
PaintShop Pro X4 SP1 I've had this happen a few times before, but now it's beyond a joke, in that any time now I attempt to use the Clone tool, an empty script error message presents, and PSP is either frozen dead or just vanishes from the screen.
Win XP Event Viewer reports: Faulting application corel paintshop pro.exe, version 14.1.0.92, faulting module corecmd.dll, version 14.1.0.18, fault address 0x0000dd54.
FWIW. PSP X2U on the same machine works its clone tool okay.
Ah well! back to a JASC version of PSP 9 that does actually work for more than part time use.
View 14 Replies
ADVERTISEMENT
Mar 8, 2013
I have the latest updates for PSPx5 running on Windows 8 64 bit. Every time I draw a line with the pen tool with "Create as Vector" unchecked, the program crashes.
View 5 Replies
View Related
Sep 18, 2011
I cannot seem to find the clone tool options in the EDIT TAB. I have used PSP from version 7 through version X2. Normally when you click on the clone tool a series of options appear in the upper left hand corner near the pull down menus. One of the options is the ability to adjsut the size of the clone tool. These tool adjustment options are missing in version X4. Interestingly, the tool options are available in the Adjust tab.
View 2 Replies
View Related
Dec 25, 2011
I've never been able to use the Clone tool properly in PSP.You can see that the cloning is blotchy and just isn't right...
View 10 Replies
View Related
Jun 1, 2011
PSPRo X.I have lost the ability to increase the size of the clone brush either by the presets or by the mouse and keyboard.It will not show by more than about one eighth of an inch square .
View 2 Replies
View Related
Mar 21, 2012
My X4 crashes ("Corel Paint Shop Pro X4 has stopped working" message) during the program start-up ("Initialing Palettes" of the splash screen). I have tried uninstalling and re-installing without success. I have tried installing X4 Service pack 1 without success. I updated my NVIDIA driver to the latest version, without success.
I am running Windows 7, x64. Addition system details are below.
OS NameMicrosoft Windows 7 Professional
Version6.1.7601 Service Pack 1 Build 7601
System NameASUS-I7 (P6T Deluxe Motherboard)
System Typex64-based PC
ProcessorIntel(R) Core(TM) i7 CPU 920 @ 2.67GHz, 2668 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/DateAmerican Megatrends Inc. 2209, 9/21/2010
SMBIOS Version2.5
Hardware Abstraction LayerVersion = "6.1.7601.17514"
Installed Physical Memory (RAM)12.0 GB
Total Physical Memory12.0 GB
Available Physical Memory9.65 GB
Total Virtual Memory24.0 GB
Available Virtual Memory21.6 GB
Page File Space12.0 GB
Page FileC:pagefile.sys
Video Card: NVIDIA GeForce 9500 GT
Driver Version8.17.12.9610
View 6 Replies
View Related
Nov 2, 2012
Let me give you the details, as they are fairly specific to this issue -
First, here's my puter info: Lenovo ThinkPad Edge E520, Intel i5-2410M Core proc @2.3Ghz, 4Gig RAM, Win 7 pro 64 bit.
PSP X5 - version 15.1.0.10.
Here's da scoop:
Open X5
Open jpg file (have tried various sizes, both physical and pixel, and makes no difference)
Add Raster layer
Create tiny color dot on new layer
Merge layers
Dies, freezes up, have to shut it down and lose what I just modified.
Now, mind you, I've been using PSP since way back in the Jasc days. For years I was one of their beta testers, because I USE THIS EVERY SINGLE DAY! Literally, I'm in it every day. I love X4, still trying to get into X5, but similar to when X4 came out, X5 is slowly PMO'ing me! I create hundreds of scripts, and lots dozens of plug-ins, and so far the majority seem to work fine in X5, however this whole issue of it crashing and freezing up my puter is really getting on my nerves.
After the crash, I can re-open X5 and it'll work fine on the first image. Then next image, SSSD!
Really is getting aggravating this constant crashing. Starting to think that Corel isn't creating this software but Microsoft is
View 3 Replies
View Related
Jul 13, 2013
often while using the clone tool some of what I am trying to remove is placed just above where I am working....is there an alingment that needs to be done?
View 1 Replies
View Related
Aug 26, 2013
I have PSP 15.2.0.12, win 7 64-bit machine with ample power and graphics card. Regularly run multiple CAD programs and so on.
When I double-click the desktop icon to launch the product it crashes - always.
When I double-click an image in Windows Explorer, it launches OK and opens the file with the Edit tab active.
How to resolve the dbl-clk desktop death?
View 4 Replies
View Related
Jan 29, 2012
I just downloaded and installed the PSP X4 Ultimate, I'd like to try it before I buy it. When I installed the software, I tried to access"Color Working Space", because I work with Adobe1998 and I wanted to change the work space, but every time I try to access PSP crashes.
View 2 Replies
View Related
Jun 7, 2013
I've used the Clone Tool a lot over the years but I've never worked out how to reset the source point without having to go back to the clone tool. I know a right click resets but it defaults to the position of the clone (why?), so I usually have to right click at least twice.
View 16 Replies
View Related
Aug 10, 2012
I was wanting to try out the clone tool to paint out a fly in some footage I have, but I can't get the clone tool to grab a sample region. I hold down ctrl and click where I want to sample from, but the green circle doesn't appear. I can do it by manually offsetting it with the x and Y position, but I'd like to do it with my pen.
View 3 Replies
View Related
Oct 31, 2013
I am using PSC6 and the clone tool stamp will not paint from the sample area. After holding down the alt key to obtain sample it will not paint. I can hold the sample over the area to paint & see the cloned area visually, but it will not paint when I click. however if I click many multiple times I get a faded clone.
View 1 Replies
View Related
Dec 17, 2012
When trying to use the clone tool, my initial cursor locations (as picked by me) appears to be about 200 pixels off. I have updated video drivers and mouse drivers to no avail. There was a posting some time back about the same issue, but it seems to be unresolved. The solution was to remove code from the registry.
View 2 Replies
View Related
Oct 29, 2013
In Lightroom 5 I really like the Perspective Correction tool which always produces white Out-of-Canvas areas as a result of image deformation.As a "constain crop" very often would cut out a lot of interesting details, I love to Crop the image a bit wider.The problem are the white areas remaining that were not present in the original, undistorted image.I would love to fill them in with the Clone Tool, but it does not seem to work on those areas!
To make a complicated story simple just look at this image:My aim here is to fill in the bottom left white by simply cloning the missing part of the column.This is a super-easy job which I could do with Lightroom clone tool in seconds. Shall I report it as a BUG? (if so, how?)
View 5 Replies
View Related
Nov 23, 2013
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies
View Related
Nov 4, 2013
clone tool has worked fine, but now it does not select an area to clone from?
View 1 Replies
View Related
Jan 12, 2012
I'm trying to use the clone tool to erase creases around an eye.
I have the layer with the eye in it active, I choose the clone tool, I hit CTRL and click the area of flesh around the eye I want to copy, I see a moving outline of the flesh that's being copied, It works spiffingly! I change brush size to work in a smaller area, I hit CTRL and click the area of flesh I want to copy, I see a moving outline of the flesh I want to copy, But nothing! My cursor moves, but no cloning going on.
This has been plaguing me for a while but I've had projects going that I didn't want to interrupt. It's gotten to the point that I just can't take it anymore. I really need the clone tool for this phase of this project
View 14 Replies
View Related
Nov 30, 2011
Somehow I have managed to un-dock the toolbar in PSP X4 as can be seen below..how to get it back so that it is not over-lapping the editing area
View 2 Replies
View Related
Oct 25, 2013
I'm having an infuriating problem with the crop tool. I click on the side bar to crop an image, set the ratio, then left click and hold on the image to either move the selection or expand/contract it and PSP crops the image before I can do anything.
View 5 Replies
View Related
Jun 18, 2013
I am trying to get to grips with the pen tool and I have a problem I cant get past. I create on object using the pen tool and then use the pick tool as I want to do a specific rotation buy a certain number of degrees. But I need to move the rotation point. I click on Ctrl and then the rotation point and move it to another location. Now if I want to rotate by hand or 15 degree increment then no problem.
But if I wish to rotate by say 20 degrees then I can only use the Image Free rotate but for some reason it rotates object by the center of the object and just ignores its new rotation point. I just cant see why?
View 4 Replies
View Related
May 30, 2011
Is there a tool missing from Organizer? A "create new folder" tool button?
Also when returning to organizer, the program doesn't remember where in the folder it was browsing and opens at the TOP of the list. Can Organizer stay running in the background? It can be slow on older machines. Good thing for fast RAM and CPU.
View 4 Replies
View Related
May 20, 2012
I watched a video, but next to the Lasso icon on the tool bar I don't see a square Selection Mode icon. Also, I don't see a green Apply button.
I was able to remove the object using the Carver tool. However, I had to reduce theTif file to 8 bits. I'm not sure what the difference is. (The photo is for publication in a magazine.)
BTW, when I go to the Corel help page, the top of the page is cut off so I can't get to the search box.
View 1 Replies
View Related
May 23, 2011
Having difficulty setting the CROP tool outlines. It seems to snap to the CENTER of pixels? and the edges are difficult to grab, especially when zoomed way in to the corners/pixel level. Also dragging the outline edges seems sluggish and I don't see four numerical readouts in the CORP tool palett like earlier Jasc versions.
p.s. I almost always crop to the hearest 5 pixels, i.e. 675x495.
View 7 Replies
View Related
Aug 31, 2011
PSP X3 Not Responding, I had to terminate PSP ... I accidentally picked the Picture Tube tool, and then picked the adjacent Fill tool that I really wanted to use. The problem was that PSP was updating the Picture Tube cache, and was still in process at 98% and then hung! Not responding, killing the photo loader process not enough, so lost my current image edits. Not so good!
View 2 Replies
View Related
Oct 10, 2012
I do not want to use the the Pen Tool to make selections of Vectors! I want to know if it possible to use the Pen Tool to select say the eyes or the arm or the chair or the apple, etc! Then convert that vector pen tool selection into a Raster selection?
Photoshop and Gimp do this! I would love this feature in PaintShop Pro X5, but since that out maybe the next version X6!
View 2 Replies
View Related
Jun 16, 2012
I'm using Paint Shop Pro X2. Within the past 2 days a problem arises when I try to load more than one photo on the screen. I have multiple photos of the same thing and I want to compare them. When I switch to one of the other photos, all of a sudden I lose the top bar that contains the 3 icons to close, minimize or expand. My only alternative is to shut the program down and restart it.
View 3 Replies
View Related
Nov 11, 2011
PSP is and has always been THE best graphics app with a truly intuitive interface and useful set of features & tools.
I have been using it for many, many years... sniffed around other products, but always returned, fully satisfied with what I can achieve. I've also written a suite of scripts to further enhance my use of it alongside my photography hobby.
HOWEVER... since Corel took it over and the start of the X series, there has been a serious and very annoying omission concerning the Crop tool. Previous versions up to v9 allowed the user to grab hold of the edges of the crop box ANYWHERE along ANY side, and drag/extend/reduce the size of the box. This allowed us photographers to zoom in to pixel level and grab any part of the visible box to adjust the crop dimensions very accurately. This is a very important feature for photographers.
The new X interface has changed the crop box to 'vector node handles' only for adjustment, which are not always visible when zoomed in. This means that instead of being able to align the box accurately to an image feature or row of pixels, you have to zoom out until you can find the nearest handle to use, or scroll up/down left/right, which either takes you away from the area you want to work on, or zoom too far out to see the detail you want for alignment.
option/preference to ditch the vector handles and grab the sides as before. I know you may think it a backward step, but you've taken away the very function that photographers need for cropping a composition, which is available in other products.
View 4 Replies
View Related
Jun 11, 2013
All of a sudden my X4 Tool Options started floating rather than the usual way to see and use them.
How do I anchor the Tool Options.
View 2 Replies
View Related
Oct 10, 2011
I used PSP X2 ... a few days ago I bought x4...but I dont know how the text tool is working properly..
Is it possible to change it, that it will work like that one in X2 ?
I cant move the text after I wrote something in a picture.and where is a text-input window ?
every time a open a picture and choose the text tool it is in "vector mode" but I do not want this mode.
View 8 Replies
View Related
Apr 27, 2012
Version: PSP x4 w/ SP1
O/S: Win 7 Pro
I've been using x4 for several months, and in the past few weeks I've been encountering strange artifacts of the Crop tool. If I move the crop rectangle, it sometimes (but not always: see below) leaves a black line or lines of varying thickness where the rectangle had been. Here are a few possible clues:
- It appears to happen only with images that contain layers.
- An F5 refresh does not get rid of the artifacts.
- Flattening the image does.
- It appears, I think, to occur only when moving the crop rectangle (not resizing), but I won't swear to that.
- I have on at least one occasion been able to save the file with the lines as part of the image.
View 3 Replies
View Related
