I have drawn a vector shape and want to apply 4 colours to it. I have drawn 4 squares with the colours I want and then merged the layers so it becomes 1. I then "selected the pixels" on my shape and cut out that shape from the 4 squares of colour i created. However, when I resize my shape, it blurs as it is not vector anymore.
Is there a way to do acheive the above but keep the shape a vector?
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
When creating vector shapes and holding shift the shape do not snap to pixel. Snap to pixels is turned on. Initially when do not hold shift shapes is pixel perfect. As you can see in the image first 2 shapes are made free hand.
I'm doing science fair right now and i need to figure out how many pixels are in a certain selection (a laso). Is there a way other than knowing the width and height, a way to know exacly how many pixels are in a selection? or even how many pixels of a certain color are in a selection? if there isnt, does anyone know a program that can do this?
View 5 Replies View RelatedI'm having problems with the magic wand tool. I try selecting an area which works fine but when I try to subtract an area from it I get this message: "Warning: No pixels are more than 50% selected. The selection edges will not be visible." I googled this and came up with a few solutions but none worked. The most common solution was to reduce feathering to zero. When I tried to do that I got the message: "A number between 0.2 and 250.0 is required. Closest value inserted." Any idea what I'm doing wrong and how to get rid of these annoying error messages?
View 8 Replies View RelatedI am trying to work throught the photo restoration book. I am putting together a photo that has been torn into pieces. I have to select each piece using the lasso tool, use the option key with magic wand to select it in more detail, then make a new layer to store each piece in.
The first torn piece worked out fine, when I tried to select the second piece, I used the lasso successfully, then tried to hold down the option and click the magic want, it said that there were no pixels selected. I have run into this problem before.... I started over and over reselecting this piece and every time, it said that there were no pixels selected.
Why does "Pixels Not Selected" often comes up and selection is negated? (Windows 7)
View 1 Replies View RelatedI want to crooss-hatch all of an image. But, I cannot because "no pixels are selected". How do I sellect pixels (I already tried "All" and "All layers" -no good)? PSE 11 Mac.
View 2 Replies View RelatedWhen I try to copy a selected area I get the message "Cannot complete the copy command because no pixels were selected?
View 2 Replies View Relatedhow can I measure selected area of pixels using photoshop elements 12?
View 2 Replies View RelatedEverytime I try to cut something it says
"Warning: No pixels are more than 50% selected. The selection edges will not be visible."
When working with selections - particularly when adding multiple Magic Wand selections to build the selection required - it can be difficult to see clearly (from the shading and outlines which show the current selection) what is selected already and what isn't - particularly at some zoom levels and depending upon the colour(s) of the pixels that you are working with (blue-greys, for example).
My suggestion, therefore, is that in any of the Selection tools, while you are holding down either of the modifier keys Ctrl or Alt (which would modify the Selection Mode of any further selection to Add or Subtract mode), all currently selected pixels should be temporarily highlighted - overridden by a single colour (say, your current primary colour?) with the shading (and outlines?) that normally depict the currently selected pixels removed. This would make it easy to visually confirm exactly what pixels are currently selected.
Perhaps the removal of outlines ought to depend upon the magnification that is currently being used: at high magnifications where each pixel is depicted by a relatively large screen area and the outline can be easily distinguished from the interior of each pixel, then outlines (perhaps of your current secondary colour?) might work to define the selected area, but where pixels are very small it might be best to remove them.
Also, as a visual indicator/reminder of the modification which the modifier key will make to the effect of the next selection - and one that is slightly larger than the minuscule plus or minus sign that appears in the mouse pointer - would it be easy to temporarily override the Selection Mode symbol showing in the tool selection toolbar, with the symbol for the modified effect, whenever the modifier key is depressed?Not forgetting that this symbol ought to change again if the Right Mouse Button is used instead of the Left.
If the above is easy, then, in the Magic Wand tool, could the Flood Mode symbol in the tool selection toolbar be similarly temporarily overridden with the Global Flood Mode symbol, when the shift key is used to override Contiguous Flood Mode?
Wether it's possible to spread the pixels colors considering the normal vector of the selection curve ?
I post an image that would be the approximate result of what i imagine.
She now tells me she wants it in different sizes without pixel issues. The only way I know to do this is through vectorizing the file. Is there any way at all possible to save this file as a vector without re-creating it?
The file is a multi-layered product which I felt was a bad idea for a logo, but it's what they wanted.
I've read through googling, there are programs to do this for me. I also read somewhere where I could export the file out as a PDF and CorelDraw could do it. But does this mean tracing out the file -- and basically recreating it?
I need to create an outline map for another application. The world is demarcated into areas, separated by black lines. The map must only have black & white pixels.
Some questions about using GIMP for this.
1. Is there a tool I can use to make every non-white pixel black?
2. Is there a tool I can use to eliminate isolated pixels of the wrong color (that is for me a black pixel with all neighbors white or vice versa)?
3. Is there a tool I can use to make the black lines thinner? It is desirable in my application to have the lines be only 1 pixel wide
I use photoshop 3.0 and am familiar with basic functions, but now i need to create a vector image - this is for uploading to a t shirt design web site. The writing needs to be in Russian, which i have successfully cut and pasted into photoshop.
View 3 Replies View RelatedI've been using GIMP to make GIFS for a long time now, but recently the "optimize for difference" option I've used is having the reverse effect it should have- ie, it's making the file larger. Here's an example. It's the exact same image, same dimensions, same amount of colors. The first one is unoptimized, each frame is a full picture, and it's file size it ~149kb. The second one is the same as the first, except optimized with about ~50% of the pixels removed from each frame (except the first frame obviously), and yet it's file size is ~155kb. I can not for the life of me figure out why an image with most of it's pixels removed is creating a larger file size. [URL]...
View 3 Replies View RelatedSomehow I've managed to disable a feature in Illustrator CS6 that does two things: 1) it causes a small box to follow the cursor when I'm drawing an object 2) the light green lines or x's are gone now, too. How can I get them back? Are they only visible under certain circumstances?
View 6 Replies View RelatedIm wanting to recreate a cloud vector from a stock image site. Unfortunately i'm rubbish with vectors and have no use making anything like this version.
Rain Clouds Stock Vector 13712545 : Shutterstock
I have created an 18 layered object on Corel Draw X4 using vectors and I would like to make it blur and streak from the back, to create the illusion that it's actually in high motion.
I have tried looking for the answer to my question on this site and elsewhere and only find the answer if it were a bitmap, yet I don't necessarily want to transfer it into bitmap as I would like to keep the smooth edges.
I am in the process of sorting out some wood engraving and acid etching of some brass plaques. I would like to know if it is possible to produce a cad drawing from a vector image and if so how ?
This is one of the two images I would like to turn into a cad drawing.
Ubiquitous Information:
Adobe Illustrator CS6 v. 16.0.3 (32-bit)
Win XP sp3 OS
I have a vector art file of puzzle pieces (connected as though the puzzle has been assembled) that I would like to use with an image file. If I wanted the entire image to appear finished, I would simply place this vector layer above the image layer and voila...finished puzzle. However, I would like to use the 3D effects in Illustrator to make it appear that some of the pieces are not yet seated into place. I know how to do this with the puzzle vector art, but how do I attach or clip the image layer to it so that it rotates, bevels, etc. with the individual puzzle pieces I want to treat in this manner?
If I am constantly making frames in photoshop for use in the video world (ie. They will be on TV) the pixels need to be rectangular (or 4x3) in aspect and not square.
I know in programs like After Effects and Combustion you can set when saving an image whether or not it is square or rectangular pixels.
How do I do this in Photoshop if it can be done?
If I already have an object selected and then click the "new layer" icon in the layers palette, the object I have selected deselects as soon as the new layer is created. Why is this? Also, it only happens on one of my computers, so I figured it was a setting that I'm missing but I certainly can't find it.
View 2 Replies View RelatedI am trying to create colour samples of vector objects which I have initially drawn in a Purple shade card. Now I would like to have the same object in a blue shadecard and then a green shade card maintaining relationships between the colours in the different parts of the object.
View 6 Replies View RelatedI am trying to outline my text so that I can apply a gradient color fill and when I go to TYPE > CREATE OUTLINES it is greyed out. I try to expand the appearance and then create outlines. When I try to expand the appearance of the font, it is also greyed out.
View 5 Replies View RelatedI have been able to make a trace file in grey scale but can't seem to export to a .dxf file. When I do the file show a size when I do a properties but shows noting when I import it to EZCAD.
View 1 Replies View RelatedI am trying to make extrusions to an image. I am new to Illustrator and have read that .ai files are the only ones that you can extrude in AE. However when I bring in an .ai file and select create shape from vector layer, a grey square covers the shape. I am assuming that it is a transparancy issue and it is just filling in the size of the .ai project. I could be wrong though.
View 4 Replies View RelatedI've been asked to create some plots of vector arrows showing the results from water current metres, ie each data point has a position (x and y only), direction and a velocity.
I have created a dynamic block to handle the vector data (a simple arrow with a stretch and rotate controls)
What I need now is to somehow read in the values for each block from an excel spreadsheet or txt file?
Windows 7 x64
32GB RAM
Xeon E5420 @2.50GHz
3DS MAX 2014
Civil 3D 2014
2 days on GIMP. I need to adjust the clone tool so it's 1080 pixels vertical and about 20 pixels wide. I googled and searched, but I can't seem to find the right phrasing.
View 19 Replies View RelatedI have several layers in an image, and I need to align them precisely. The ordinary layer shift ("move pixels") by multiples of pixels is not sufficient. Is there a tool or plugin for PDN that allows sub-pixel shifts (i.e. moves by fractions of pixel)? And rotations by very small angles?
View 6 Replies View RelatedI've just started using Xara to edit my photos. I have a problem I can�t solve: how can I export the edited photos with 72 dpi and 843*403 pixels;or 72 dpi and 404*404 pixels?
View 9 Replies View Related