I want to create a cutaway view of a technical product encompassing several images. My plan was to stack them up and have a pie shaped piece of each part transparent, so as to see the layer below.
I am able to make an entire layer transparent enough to see through, but cannot figure out how to select and make transparent just a portion of the layer such as the pie shape piece referenced above.
The visual spectrum of us humans is very different than that of a dogs as they only have two of the three cones in the eye that we have, and what color they do see is not as saturated as ours either.
below are a few diagrams that show the differences. From the information above, do you thing that you can create a color profile that closely aproximates the vision of a dog?
I want to see my model with perspective, or better yet create a rendered view with perspective, but the instructions given within the program not useful, they run: 'Drag the cursor to the desired target and click. Revit Architecture creates a perspective 3D view and assigns a name to the view: 3D View1, 3D View2, and so on. To rename the view, in the Project Browser right-click it, and select Rename.'
Dragging and clicking like that selects an object, as I expected it would, there is no sign of an sort of perspective or saved image file, so what do I really do?
I had created som drawing before I had to make som adjustments to my model which made it a deal larger. Then i went back to my drawings. Everything was perfect exept my arrangement drawing where I have used the master wiew from my model to make a drawing. When i returnd, this was locked. I'v deleted the wiews in the dwg file and I'v tried to make som new ones but the master wiew becomes invisible in the dwg sheet. Ewery other wiew works just fine exept this. I guess it's because it is a large file, but how can I fix it?
My computer has these specifications
Intel Xeon 2,40GHz
RAM 16GB
64bit
Nvidia Quadro 4000
I'm trying to create a waterfall in 3Ds Max and I can't render it, maybe to many particles? I'm still a newb to Particle View. I was think of SuperSpray but it has no way to collide and caan't add in extra particles after for the splashes.
Here's the program.
I have made a 3d model of my balcony by simply extruding the steel profiles I used in my sections. I then used the union command to join them all together.
I now think and exploded isometric may be the better way to present the drawing but as I have now made the frame all one element what is the best way to seperate it?
the corners I think will be easy I just create a planar at 45 degrees and use that to split the corners but is there an easy way to seperate the mid PFC and angle?
When I created Section View it gave me an exception of type Text saying that there is incorrect parameter, my code is:
double[] origin = new double[2];
origin[0] = bp.X;
origin[1] = bp.Y;
string strn ="";
AeccSectionViewStyle asvs = g_civil3ddoc.SectionViewStyles[0]
AeccSectionViewBandStyleSet bandstyle = g_civil3ddoc.SectionViewBandStyleSets[0];
foreach (AeccSampleLine asam inslg.SampleLines)
{
strn ="sv "+asam.Name;
asam.SectionViews.Add(strn, "0", origin, asvs, bandstyle);
origin[0] += 500;
}
while bp is a selected point (point3d type).
I kept the code simple
fname = ThisDoc.FileName(False) 'without extension fpath = ThisDoc.PathoPartDocPath = fpath+""+fname+".ipt"oPartDoc = ThisApplication.Documents.Open(oPartDocPath, False)oDrawDoc = ThisApplication.ActiveDocument oSheet = oDrawDoc.Sheets.Item(1)oTG = ThisApplication.TransientGeometryoPoint1 = oTG.CreatePoint2d(5, 5)oBaseView = oSheet.DrawingViews.AddBaseView(oPartDoc, oPoint1, DrawingViewScale, kFrontViewOrientation, kHiddenLineDrawingViewStyle, "Default")
it is a local rule in an idw file that has been saved with an ipt file of the same name saved in the same directory. Now I get the most useless error message ever devised by manking
"The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))"
How to create a view that lines up perfectly with a face of my 3D object.
View 2 Replies View RelatedWhen I try to create a table from a view, I get the following error. I have never had this error before?
View 1 Replies View RelatedI'm created the parts successfully with no error, but when I try to create a flatten view it kept giving me error. I notice that some people try to use chamfer to resolve this issue but I tried with no luck. Also, I play around with the gap size and still get the error. How to create the flat view for me so I could learn how to do it.
Inventor 2011
Window 7, 64bits
I'm having trouble creating a map book where north is rotated in the view. I've tried using ucsfollow, and the ucs command to rotate the map correctly, but when I try to create the map book the map doesn't show up in the main viewport.
How to rotate the map when creating a map book?
I would like to create a simple polyplane in the side view in Maya. When I try to do this nothing happens and the software suggests I start on the grid but you cannot see the grid in the side view.
View 3 Replies View RelatedI was curious if there was an option to set up what linked view would be set when creating and duplicating views. Its a little time staking when you have 6-7 linked files and need to make 20-30 elevations/sections. I was thinking there would be a way to setup the views so they're ready to go when you create them.
View 2 Replies View RelatedCreating a linear section view from a curved line
View 5 Replies View Relatedunable to select objects after creating them in view port ..i am not able to select them in view port i can only select them either by SELECT ALL or from outliner or Hierarcy
View 2 Replies View RelatedHaving a rough time with Pipe Networks! I am working an example from the Mastering C3D book (P. 371) as in the following steps:
1.Clicked SS structure(16)
2.Selected Create Alignment from Network on ribbon
3.Selected last structure(18), hit Enter
4.Changed options as needed in Create Align from Network - Create Profile and Profile View check box: Selected
5.Changed options and clicked Create Profile View
At this point the program pauses, then a dialog box trys to partially fill the screen but is all white then fades away as fast as it appeared and I'm stuck with a paperweight that beeps at me everytime I click the mouse, no panning or zooming response at this time. The command line is prompting me for the profile origin. I can switch to other apps and bring up TM and when I attempt to end C3D then it tells me that it can't because waiting for response. I can then cancel the prompt to save the drawing and C3D exits the active command and control is returned.
[URL]
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
When creating plan and profile sheets with multiple alignments in the view, what is a common practice in civil 3d?
- Data shortcut all alignments that are in the view into the plan and profile model
- Create a dwg that has all the alignments data shortcutted and xref that into the plan and profile dwg
- Create a dwg for each alignment and xref into an overall alignment dwg via attach and then xref the overall into the pp sheets dwg model.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I want to extend sampleline along matchline for creating cross section view.I used Modify-extend in hometab, but it doen't work.
View 2 Replies View RelatedWe have a map of our primary lines in an ESRI .shp file, that superimposes nicely on our other shape files, for shoreline and rivers and everything else, that works fine. As part of some project planning I'm doing, I'm making a series of layouts, each taking a snapshot of an area, with a revision cloud around the lines we're planning to replace.
I loaded the map up this morning and everything was as I saved it, but as I was creating a new layout and zooming to the correct region in my view port, every single revision cloud I drew disappeared. As did all the annotations and other labels I'd made - absolutely everything that isn't from a database just up and vanished.
I've turned off all the database links, there's nothing covering them up, I had none of them selected and used no delete commands, all I did was create a new layout via copy and adjust the viewport on it, they're just gone.
I new to using the view frame groups we do allot of double plan view 11x17 sheets using an alignment on top of MrSid aerial drawings. It is very time consuming to setup the viewports along the alignment doing the old fashion method of copying the page setup and sliding the model space along the alignment for the next sheet. I understand the plan profile and cross section methods of creating multiple sheets and how the viewframe group works for those type of sheets. I'm just not sure how to create a dwt template for one plan view on top of another plan on the same sheet with to viewports. I know I'm not the only person that creates road cl double planviews when your not concerned about a profile.
View 3 Replies View RelatedIs it possible to create a custom keyboard shortcut to Reset View in the Rotate View Tool?
View 1 Replies View RelatedWhen I'm working in PS CS and open a folder of pictures it always reverts to List view even though I exited last time in Thumbnail view. How can I set it to open in Thumbnail view by default?
View 2 Replies View RelatedI was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View Relatedhow to create a section view for a pond other than quick view.
View 2 Replies View RelatedI have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
