I need to troubleshoot printing in cs6 photoshop extended. I have printed a lot but it started crashing yesterday. Toshiba - All-In-One 16gb 64 bit Windows 7 home premium. video driver is up to date. I have uninstalled/reinstalled.
View 1 RepliesI recently bought the CS4 Design Master Suite and it includes CS4 Photoshop Extended. I've used it several times and I like it more than CS3, the differences aren't drastic but they make a big difference (in a good way).
So I'm using it the other day and it suddenly closes within a minute of opening a file. No warning, no error message, it just closes. I think maybe I accidentally clicked close or somehow ended the program... nope, I restart it and it does the same thing. So then I assume it's a faulty file...nope, it still closes itself within a minute with whatever file I open.
I've contacted Adobe customer support, but they keep referring me to the CS3 photoshop troubleshooting page, even WHEN I explicity list in the questionnaire that my woes are related to CS4...
It crashes before it even finished loading. I haven't even gotten the program to work once. Yes, I uninstalled and reinstalled. I have no printer, and I'm using Vista 64.
This is what it says.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: dlbktwds.ds
Fault Module Version: 3.107.0.0
Fault Module Timestamp: 45df4d5a
Exception Code: c0000005
Exception Offset: 00004da2
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I know Windows 7 is not officially supported, but that's the point of software testing - to find bugs.
OS: Windows 7 32bit, build 7057.
PS: CS4 Extended 32bit, ver. 11.0.1
GPU: disabled
Problem: Any operation from the "3D" menu results in Photoshop crashing. (Module was C:Program FilesAdobeAdobe Photoshop CS4Plug-ins3D EnginesPhotoshop3DEngine.8BI)
Problem with AdobeOwl.dll according to debug report. Also Variations not working.
View 7 Replies View RelatedI trashed the prefs. Photoshop is usually bulletproof, but this is something new. What is going on? Next I will re-assign the printers.
View 5 Replies View RelatedEverytime i open a CS3 psd file in Photoshop CS4 extended 64bit the application crash after few minutes or seconds...
View 7 Replies View RelatedI have upgraded my iMac to Mountain Lion and now I cannot print from CS5 extended version 12.0 x 64. Any patch for this. As a Photography tutor, it is essential to have this working correctly.
View 4 Replies View RelatedWe are having issues with Corel X6: when we try print preview, the print preview window opens, but after we click print, it just crashes and that's it.
Both corel and Windows are updated, and the machine is clean.
When I try to modify the custom properties for the HP t2300, Autocad C3D 2011 instantly becomes non-responsive and hangs. After a few seconds, every other open app suffers the same fate. If I have task manager open to the performance tab, I can see memory use escalating rapidly. Either I use Taskmanager to kill Acad quickly, or I end up killing the power to the computer and restarting the hard way,
the plotter is set up on the network with separate queues for Postscript and HPGL. Accessing the PC3 for the PS queues has no problem, it's only the HPGL queue that hangs me up, and only in C3D 2011 (and Civil3d as AutoCAD)
LDT and LDC Map 2009 do not have the problem,. nor does Map3d 2011, and TrueView 2013 is also fine. All of these are pointing to the same set of PC3, PMP, and CTB files.Other applications do not have any problem getting to the printer properties, just Civil3d 2011..
I tried to print the layout from autocad, the autocad will freeze and it will prompt out the AutoCAD Application error message as the attachment below. Once click on "cancel", the application will shut down itself.
*The printer is HP LaserJet P5225.
*Other program like Revit, MS Word and etc still able to print well.
*Computer spec: Windows 7-64bit, 12 GB RAM, Xeon processor.
*Installed with the HP original driver from original disc that given
After ugrading to LR 3.5 I have not be able to print an image. Each time I move to the Print Module the systems crashes with the error message "Adobe Light Room has stopped working". My viedeo card is an ATI Radeon HD 5570 and I have no problems printing from any other program including Qimage. Windows 7 64bit updater shows all updated to the OS have been made. All the other functions in LR are working normally. Only the print functions seems to be failing.Â
View 1 Replies View RelatedCurrently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
Â
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
Â
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
Â
So, what are my options?
Â
Just copy the plugins from CS5 to CS6?
Â
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
I have a coworker who is having trouble printing from AutoCAD 2011 (sp2) on his Dell Latitude, Win 7 64 box. Whenever we try to print or even do a print preview, it will crash the program
He has tried several printers and uninstalled and reinstall the drivers for them. Tried uninstalling and reinstalling the program as well.the Windows Application event viewer shows this when AutoCAD crashes.
Faulting application name: acad.exe, version: 24.1.208.0, time stamp: 0x4dbf9c16
Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp: 0x4cc7b325
Exception 0xc0000374
Fault offset: 0x00000000000c6ab2
Faulting process id: 0x28c
Faulting application start time: 0x01cc5c6016a04e15
Faulting application path: C:Program FilesAutoCAD 2011acad.exe
Faulting module path: C:WindowsSYSTEM32
tdll.dll
Report Id: dcb31b1a-c853-11e0-a254-463500000031
Also, I have trouble remoting into his laptop because it will not display correctly with our Landesk software. So I'm wondering if this is a display problem rather than a printing problem.
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedI use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedI am suddenly plagued by Photoshop Crashing, for reasons not immediately understandable by moi.Here's the crash data:
Â
Log Name:Â Â Â Â Â Application
Source:Â Â Â Â Â Â Â Windows Error Reporting
Date:Â Â Â Â Â Â Â Â Â 2/24/2013 9:54:30 AM
Event ID:Â Â Â Â Â 1001
[code]...
PS CS2 just up and stopped working.
I can no longer create new images or open existing ones. Instant crash 100% of the time.
I have done everything I can think of..... including....
re-installed it.
uninstalled, then done full re-install
Uninstalled it...then...
Bought Norton, ran everything
Bought System Works, ran everything
Ran Memory & HD tests
Defragged the drive
Full re-installation......... same deal.
Core 2 Duo / XP Pro / 2GB RAM / CS2 9.0.2
Has anyone been able to figure out why PS3 crashes? I can not open it, it says Photoshop CS3 has stopped working. I have removed and reloaded the program and it still will not open. Can't keep production up with this,
View 4 Replies View RelatedIf the file size is larger than 15MB it crashes before it opens the file.I fixed this the first time by reinstalling my OS.I fixed this the second time by moving my files from their folder to the desktop then opened it from there.I can't seam to fix this for the third time and I'm soooo frustrated. It works until it crashes then it never works again.So for instance, it worked everyday for a month, then I stopped using it for a week and came back and now it keeps crashing on files over 15MB.Here's my computer set up:Win XP SP3 ProAMD Athlong 62 x2 DualCore Processor 4200+2.20GHz, 2GB of RAM1GB NVidia GeForce 9400 GT Photoshop Error Signature:AppName: photoshop.exeAppVer: 10.0.1.0ModName: bib.dllModVer: 1.2.1.1Offset: 0000c632
View 6 Replies View RelatedAm a loyal Adobe customer. Have had PS since 1997 starting with PS 4.0. Upgraded very year up to PS CS. Then my wife became ill with breast cancer (died in 2008 from it), lost my job, lost our family home to for closure in 2010, my 20 year old son diagnosed with luekemia in 2011 (still fighting on chemo) yada yada yada.
Â
Bottom line, I cannot afford to upgrade my Acrobat Pro, my Photoshop, my Premier etc etc etc.We sometimes don't have enough money to eat.
Â
So my pc crashed the the other week. I just finished rebuilding using a new hard drive, Photoshp CS in installed again, and running perfectly. BUT I keep getting a need to activate alert. And can't do it.