Photoshop :: Blue Part In The Middle
Jan 8, 2003how they did the blue part in the middle,
View 2 Replies
ADVERTISEMENT
Photoshop :: How To Crop A Photo To Remove The Middle Part
Jun 17, 2013How do I crop a photo so that I can keep the sides of the photo but remove the middle part.
View 5 Replies View RelatedAutoCAD Inventor :: Shrink Part In Middle?
Jan 9, 2013I have a part which is lets say 10ft long. Now I need to modify that to be 9.5ft. Is there a simple way to remove that .5ft from the center of the part?
I just need a way to cut out a .5ft section in the middle and then put the two remaining pieces back together. Doing this would be much easier than editing the sketches for the part, especially since I may have to change the amount that is cut out and that would change the number of holes and features.
Attached is a picture of the parts i have to edit and some lines to show the section that needs to get removed.
AutoCAD Inventor :: Dimension To Middle Of Part Or Mid-plane
Jun 19, 2013Is there any way to dimension my features, whether it's a sketch or using the hole feature, to either the middle of my part or to a middle plane I have?
I am wanting a group of tapped holes to be the same from the middle of my part, regardless of what the overall size of the part is. How can I dimension like this?
Illustrator :: Layering Only Part Of Object And Aligning Convergence Point In Middle
Oct 12, 2012I would like to layer them in such a way that the orage circle below is put in front of the green circle. Essentially, I need to select only the part of the orange circle and bring it to the front while leaving the other part of the circle alone. Can this be done in Illustrator?
In summary, this is what I am trying to accomplish: Green over blueBlue over yellowYellow over orangeOrange over Green
Also, is there a way to use a tool inside of illustrator to arrange the locations so they are all 100% perfectly alligned and meeting in the middle without "eyeballing" it?
GIMP :: How To Get Rid Of Blue Line (Not Part Of Layer)
Oct 29, 2013I have a blue line in gimp I've been trying to get rid of. It's not part of any layer so I can't erase it, its thickness scales with zoom; and it also doesn't render in the final product, but it's irritating to look at.
View 1 Replies View RelatedPhotoshop :: Image Blue And White - Batch Command That Will Change Blue To Black
Aug 16, 2012i have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies View RelatedPhotoshop Elements :: How To Make Blue Skies Less Turquoise And More Blue
Aug 8, 2013I'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?
View 1 Replies View RelatedRevit :: How To Cut Red Part Of Wall 1 / Hole In Wall 2 By Blue Rectangle
Nov 27, 2011Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
Photoshop :: Remove Blue / White Rectangle Leaving Blue Swirl On White Background
May 16, 2012Ok so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies View RelatedPhotoshop :: Cannot Print True Blue Colors It Will Only Print Same Shades Of Violet / Blue?
Jul 28, 2011I'm running Windows 7 64Bit running Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my printer (HP Photosmart Prem 310-C) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue. It has even affected MS Word & MS Project when I try to print blue colored font or Gantt Chart blues will no longer print blue, but will print the same blue/violet color. I've even tried a brilliant blue which will all view great, but prints the same shade of violet blue! All my colors and Blues will view great! I've calibrated my monitor and I've reset my printer several times and still the same thing! I never had this problem before I downloaded Adobe CS5! A strange thing is that I can run check printer test and the data & image that is stored in the printer will print blues perfect, including running a copy direct from the scanner bed and it will produce perfect blues. I almost feel as though Adobe CS5 has possessed my PC and printer, how do I get it back to printing like it did before installing CS5 Master Suite?
View 2 Replies View RelatedPhotoshop :: Crop Out Middle Of Image?
May 26, 2013ill be working on a project for about an hour and ill pres enter after moving it and it will just crop out the middle of the image? even if i dont press save, it will reopen and still be gone. it also effects not just the image i was working on but some of my other projects from photoshop im doing.
View 20 Replies View RelatedPhotoshop :: Pen Tool In CC - Middle Point
Jun 18, 2013Just updates to Photoshop CC and I am having a problem with the pen tool. In CS6, if you made two point, and then added a point between them you could immediately move the middle point. Now in CC you must move your mouse off the point and back on for it to recognize it. There is a video of the problem at this link:
[URL]........
I've tried trashing my preferences (shift alt option on startup) and it did nothing.
Photoshop :: How To Create Exposure Circle In The Middle Of Pic
Jun 3, 2012I wanna know how to create that exposure in the middle of this pic... It adds focus to the pic... Like the circular light in the middle.
[URL]...........
Photoshop :: Slowed / Choppy In Middle Of Session
Jul 4, 2012I was working on a project and all of a sudden everything with in PS got notably slow and choppy. This first happened while using the selection tool (polygonal lasso), which was lagging behind and making late clicks. I finished my selection and noticed the cursor in general was slow choppy still. I saved my work, shutdown PS, then reboot my computer. I reopen my project, the cursor lag seemed to be gone but the brush tool was not working correctly. Instead of making smooth burst of color with one click (gradient like), it now looks like 256 4 bit (old nintendo style) bursts. Or you could say it looks like multiple rings getting smaller and darker, like counting the rings of a tree trunk.
This happens instantly after opening a file of any type and size. I work with CMYK and 300dpi and while working on a page, this just happened out of nowhere.
I have an ASUS G74SX, i7 CPU, GeForce 560M w/2 gig RAM, 8 gig of SDRAM, 3 each SSD 300gigs (this is basically a 6 month old gaming laptop and has been working fine with PS until now). I have my PS scratch disk set to my F drive for all art and there is nothing more than 2 gigs of space being used right now. My RAM used in PS prefs was maxed at 5205k as suggested by the program.
PS CS6 is fully up to date as well as all drivers for my GPU and the rest of my laptop.
Photoshop :: CS6 Freezing With Middle Eastern Type?
Mar 10, 2013When I use East Asian type there is no problem but with the Middle Estern type my program freezing every few second. I use MacBook pro. I have checked the FontBook there is no duplication.
View 3 Replies View RelatedPhotoshop :: How To Determine The Middle Color Between 2 Colours
Aug 15, 2007If I have to colours, and I want to add a third colour between them to make it flow more... is there a way to determine the middel colour between 2 colours.. eg. grey for black and white
Or between light red and dark red.. there is "normal" red.. but how do you determine the value of normal? Or do you do this just by eye?
Photoshop :: Cs4 At Startup (gray Rectangle In The Middle)
Apr 6, 2009I just recently got Cs4 and each time I open it thers a window that pops out with the PS logo on the top left cornor and a grey rectangle in the middle.
View 2 Replies View RelatedPhotoshop :: Popup Panel Windows Always Appear In Middle Of Monitor CS5
Jul 9, 2012As of recently, all popup windows in Photoshop (i.e. colour picker, layer styles etc) appear in the middle of my monitor and cover the canvas i'm working on.
In the past, I would move this window over to the side and next time i open it, it would open in the last position.
This is no longer the case. Everytime it opens right in the center of the screen covering my artwork.
The same goes for layer styles. e.g. Stroke.
First the Layer Styles popup will cover my work.. i'll move it to one side
Then when I want to colour the stroke, the colour picker appears in the middle so I have to move this too.
I probably waste about an hour of my day just moving these popups out of the way.
The only thing I can think of is the fact that i've recently updated my graphics card driver (ATI Radeon HD 5700 Series) In Catalyst Control Centre, I hav ticked the option to keep dialogue windows in the correct place but this doesn't apply to the in-application popups.
Photoshop :: Edit Text In Middle Of Picture That Was Scanned
Oct 17, 2013How do i edit a text in the middle of a picture that was scanned ? What software will allow me to do this ? I currently have Photoshop and xi.
View 7 Replies View RelatedPhotoshop :: Button With Middle White/reflection..outerhighlight
Mar 31, 2009how the button has the middle reflective quality..also the border is a darker color of the actual button color.
View 1 Replies View RelatedPhotoshop :: Way To Center Text, Or An Object In The Middle Of Your Picture
Aug 4, 2005way to center text, or an object in the middle of your picture... I have some text I want in the center, but I can't seem to get it right, always seems to look off to one side.
View 6 Replies View RelatedPhotoshop :: Mouse Middle Button = Spacebar Panning?
Jul 6, 2008How about add this feature to Photoshop?
Hold down mouse middle button = hold down spacebar panning?
Photoshop :: Decrease Canvas Size By Removing The Middle?
Feb 28, 2009Is it possible to reduce canvas size by removing a set width or height to be removed from the center of the image? Here is an example situation. I have a graphic that I use for rounded corner effects in a website. For border and shading reasons, I am using images that span the whole width of the element, not using individual corner images. So, my image would look something like this:
:.__________.: (bottom.gif, let's call it)
I've had to create a number of these images in varying widths, based on whatever element it is to accent. What I'd like to do is have my base PSD image be, say, 1000 pixels wide, and when I need to create a graphic that is 200px wide, I would just remove 800px of width from canvas, but from the center, and have the sides collapse in together.
Photoshop Elements :: What Are Blank Gray Screen With Box In Middle
Feb 13, 2013What are the blank gray screen with a box in the middle? Is a photo missing and if so how do I find the photo?
View 1 Replies View RelatedPhotoshop :: Middle Button On Wacom Pen Kills Paint Tool
Nov 19, 2013I've been having this problem for a while with Photoshop and my Wacom pen...
I'll be painting and I'll bump the middle button on my wacom pen and I'll get the circle of circles that spins forever... until I force quit. It's so cumbersome. I have my middle button mapped to the middle mouse click.
I use a mac and currently on CC. I have an intuos 5 but It used to happen to my three too. It's been less of a problem lately because of the crash recovery feature but it's still a huge problem...Like if there was an auto save feature or something then I'd be less frustrated.
I seem to have trouble articulating what's going on as well because all I get back is... did you update the drivers? it must be a wacom issue. try an update... etc.
The wheel spins but the pen still draws... like... FML
Photoshop Elements :: How To Remove A Person Or Object From Middle Of Photo
Dec 11, 2013how do i remove a person or object from middle of photo, i am using photoshop 12
View 4 Replies View RelatedPhotoshop Elements :: Cannot Move Text Boxes While In Middle Of A Project
May 24, 2013For some reason, I suddenly cannot move my text boxes while in the middle of a project. I get either the hand or arrow but I am not able to move it.
View 5 Replies View RelatedPhotoshop :: CS6 Extremely Slow After Changing Text Engine To Middle Eastern
Aug 28, 2013I'm using PS CS6 13.0.5 x64 on Snow Leopard (iMac 27" late 2012). I tried to change the text engine to Middle Eastern, but after I restart PS, the program is nearly non-responsive, and it takes forever to edit text. Changing it back to East Asian solves the problem, but then again, I want to use the Middle Eastern feature...
When I use Illustrator CS6 I don't have such problems (although I have to write backwards, since there is no support for right-to-left in Illustrator in my version)
Photoshop :: Split A3 Page In Half With Columns In Each Side With Middle Spacing Of 0.5cm
May 31, 2013In Publisher, I can split a A3 page in half with columns in each side with the middle spacing of 0.5cm, how do I do that in Photoshop? So when I print it off and fold it, each side is equal,
View 2 Replies View RelatedPhotoshop :: Why Layer Masks Now Square With Circle In Middle Not Rectangular White / Black
Jun 9, 2013Why would my Layer Masks in Adobe Photoshop CS5 extended Now be a square with a round circle in middle and not rectangular & black or white like they were originally ?
View 6 Replies View Related