i was wondering if there is a way to blend the same image together. One side of the image is green plain. The other is a woman's face with greenish grayish background bhind her but a little to the right is the plain green box. How do i blend the green into her background? I have seen the blending of two photos together but what if it is the same photo?
View 1 RepliesI would like to create an image like the one attached. It has very nice effects including the blending and an added shade of purple to some parts of the image. Anybody knows how I can achieve this in FIREWORKS please?
View 2 Replies View RelatedPhotoshop CS2, I have two images (ImageA and ImageB),2) I want to place ImageB onto a canvas with ImageA - this I can do,3) When I place ImageB onto the canvas and nudge it to ImageA, I want the RIGHT side of ImageA to Blend/Merge/Feather with the LEFT side of ImageB. The result is that I do not want to see the edges of either images when they are nudged together. I'd like them to "Flow" together. Also, I'd like to be able to put a "Glow Around" then entire merged content, but Ithink I have a link that explains this. I am not sure of the terminology above - Blend/Merge/Feather
View 5 Replies View Relatedi was wondering if it would be possible to get a plugin or maybe there's a way to do this that would 'blend' the border of one image that you paste on top of another, larger image. so that the borders wont contrast - like a black dot on a white page.
if that description doesn't make sense, imagine using such a tool on a a black dot on a white page. it would make the outer part of the circle transition from black, to dark grey, to a lighter grey, and then to white...
I want to blend and tone the center image (mostly the wood panels) so it looks somewhat compatible with the images on the side. I did one botched job of working on the file for a few hours, and didn't save it in my earlier stages, to my regret. It's all one image.
View 2 Replies View RelatedHow can I blend the image into the background. I do not want to see the white around my image.
View 1 Replies View RelatedWhen I try to use the Apply Image Command to blend two images, the command only allows me to blend the target image with itself; that is, with two images open, the only image available to me as the source image is the target image.
View 2 Replies View RelatedI have "group1" and inside that group, only one layer: "layer1". The blending mode for "group1" is vivid light and for "layer1" it's "normal".
Now, if I change "group1" to "pass through" and "layer1" to "vivid light" ... the result is completely different, while it should be the same, shouldn't it?
im having trouble getting the fillet edge command to work. Ive never had a problem with it before but now i get <Modeling Operation Error:
geometry or topology at end of blend too complex Failed to perform blend.Failure while filleting.>
why its not working.
When using the blend tool to blend colour between two objects is there a way to see the anchor points so I know where to click the blend tool.  I realise the cursor changes when over one but its seems very cumbersome to have to move it around until it changes rather than click directly on one which I could do if I could see it.
View 2 Replies View RelatedI'm using Illustrator CC (on a Win7 Pro machine) at a beginner level, probably halfway to intermediate. I'm trying to learn how to blend colors together for highlights of various types (skin tones, clothing, light on objects, etc.) so that when I'm making a graphic for a project I'll have a decent idea of which tool/technique is best for the specific effect I need.
Â
I'm trying to use the Smooth Color option in the blend tool. Late yesterday afternoon I recall creating two ellipses (one of which was a solid fill and one of which was a gradient going from black to transparent) and getting a smooth color transition between the two. It was a much harsher effect than I was looking for so I didn't keep it. This morning, while trying to replicate the same thing, I seem to be unable to use smooth color between two objects if one or more of them has a gradient applied. I only get what you see below, which is a step between the two objects.
Â
I've done searches and found multiple references to blending gradients in this way and have followed those instructions (create the shapes, fill with the gradients, then either click on the Blend tool and click on the center of each shape, or click on Object -> Blend -> Make) but I can't seem to get a Smooth Color blend if either object has a gradient applied. Am I missing an important step somewhere? I'm 95% sure I accomplished it yesterday and nothing has been changed since then.
I have a series of colored rectangles I'd like to blend into a single rectangle with a smooth blend of the colors, like a rainbow or spectrum.
View 1 Replies View RelatedHow do you take an image, and set another image inside of it. Using a gradual blending transformation, where you are able to see the main image, with a gradual transformation to the image you placed inside.
View 2 Replies View RelatedI am trying to blend two different art brushes with different colors using the blend tool. I'm trying to use two fixed-size line segments of the same length and then applying the two different brushes to those segments ( each art brush is a different color). Then I want to blend them the regular way so their colors transition. However, when I do this, the first shape is a different color, but all subsequent blend steps are the color of the second blended shape. Why is this? It doesn't blend the colors for some reason.
View 4 Replies View RelatedI am having diffuculty with the blend tool! I tried to upload the image but it said it was't allowed. Not sure how to correctly explain the problem but I'll do my best. I am have trouble getting the blend tool to recognize the images. I can only select the very edge of the images and then it doesn't look like it should when it does blend. How I can upload the file to show what I am trying to say?
View 3 Replies View RelatedWhen I copy a selection from one image to another, I can't select the feather tool to blend it in the new image (it's greyed out). I have to first anchor the layer, then use the paths tool to re-select the pasted portion again, then feather. Is there another way?
Update: Looks like I can feather before copying/pasting the selection.
I've got a question about the "Blending Sliders" option via Layer>LayerStyles>Blending Options
I understand the purpose of these sliders already.
But, I alway used them with "Blend If:" set to Grey.
I was doing P.40 in Photoshop Most Wanted 2, it instructed to use "Blend If: Red.
I don't see absolutely any difference in the effect buy using red instead of gray.
After taking two images of a landscape, one exposed for the foreground and another exposed for the sky. How do I open them each in a seperate layer so I can blend the two together. Giving me a correctly exposed image of foreground and sky.
I don't want to do HDR just blend two images. I use CS4. I should mention I use Aperture to manage my images and edit with CS4 by migrating the image from within Aperture.
How to blend two images. The case is that i want to blend roots and money. I want to make the money look like drawn from the roots. Which instrument should I use?
View 1 Replies View RelatedI am working on some food pics for a gas station. I'd like them to all be on 1 sign. I've chosen the pics from dreamstime
1. pizza (on left)
2. wet vegetables (middle)
3. ice cream (on right)
How do you blend these pics together so there is not an obvious seam seperating them. How do you get the colors to match. Any ideas or tips?
How do you blend one layer into another..
so it like fades into the next one.
I working on a picture and I have copyed eye from another photo onto one with her eyes close but now I need to blend tham so the color will match with the rest of her face any suggestion?
View 3 Replies View RelatedI have a bracketed series of a landscape shot from Rocky Mountain Park that varies by about 3-4 stops. In the lightest the shaded areas of the foreground are great but everything else, especially the sky and distant mountains, are blown out. In the darkest, the highlights are just right but the shadowed areas are far too dark.
The scans are from 6x7 Velvia chromes.
I have made a pretty good print by combining parts of three of the scans by cutting, pasting, and blending them. But there is a halo in one very difficult area and that's a very tedious project.
I have tried the HDR but Photoshop says the chromes don't have enough exposure range for HDR.
How can I blend several of my images together to produce. (the money, birds, etc). My images all have different backround colors and when I blend them, one can obviously tell that they were added together.
View 2 Replies View Relatedtrying to make to a flyer with a bunch of diff ppl on it but I want to make the bottom on everyone to blend in with the background so it wont look like I just chopped off there legs.
View 2 Replies View RelatedI have three "spotlights" that I made with the radial gradient tool:
The top is what I have, the bottom is kind of what I want.
I want to blend them where they are together, but not have them lighter
where they cross than the middle of the spotlight.
I'm trying to blend my head in with this picture and I can't get it to blend well.
View 1 Replies View RelatedIm trying to make an image which look something like this, its like looking at yourself, or having a person standing at a different position of the image with the exact similar background. Can i do this in photoshop cs2 or is this only available in cs3? how do i do this?
View 1 Replies View Relatedi am makeing some photo collages and have been using the feather tool, but i would like to know if there is a better tool.
View 9 Replies View RelatedSo I'm trying to do a face blend and I've repeated the process three times in order to make sure I'm not making any mistakes, but I still can't auto blend the two layers.
Any time I go Edit, auto-blend layers it's greyed out which is quite frustrating. I've taken a couple of screenshots to illustrate my problem. I am using CS6 on a new MacBook Pro.
I've recently downloaded Photoshop CS6 trial version and i've tried to add a flare to a transparent background image and turn the blend option to color dodge or screen but when i do so the black bg does no go. It stays there but i have seen in many other examples video and i've even done it myself at school computers and at my home computer once but this time it just wont do it?
Â
Example:
I open a signature for a forum i made with a transparent background.
I import a flare. It has a black bg.
Turn blend mode option to screen and the flare goes above the text but the black bg is still actually there.