silly me I'm sure but I can't work it out. If I have a series of numbered images, say 30, numbered from 1 to 30 and I open them all at the same time the topmost image will beimage 30, the bottom most image 1. How can I reverse this order?
Even if I manually choose, say image 5, then close it PS automatically selects image 30 as the next active window.
when I open two images in PSE9 how do I move the windows in order to transfer one figure to another?
View 1 Replies View RelatedWhy aren't multiple effect controls windows saved with a workspace?
I have many projects where I use a null as a controller with many sliders etc to control the animation of many layers. I open a couple of effect control windows and lock them with the contents of the controllers in them. Works great UNTIL I switch to a new workspace - even if it's based on the original and was saved with the effect control windows open in it. At that point, all effect control windows are removed.
I have to then re-open, position and select layer, lock etc - takes ages.
Why aren't the effect control woindows saved, even if they're empty, it would work as you'd expect it to.
how do I re-order or change the order of images within a file?
View 2 Replies View RelatedI just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View Relatedis there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View RelatedHere I have several concentric squares in an uninterrupted stack.I moved the topmost (small orange) one vertically.I then went to the Alignment panel, selected all the squares and clicked on the one I moved.Then I clicked on Vertical Distribute Center.
The right hand picture shows what happened.One of the squares (that big orange one) near the bottom of the stack shot up so that its centre was above the centre of the topmost one in the stack.The centres are evenly distributed but why is the stacking order not controlling the order in which the squares are arranged?
Fortunately the positioning of that big orange square was easy to correct, but something tells me this is not the way things are supposed to happen.Seemingly this does not always happen. I have tried the method on several stacks. Some were o.k., others showed similar behaviour to the above.
There's no 3D workspace at all..I have Photoshop CC, Windows 8, Nvidia GTX 670MX, and 3rd gen Intel i7.
System info:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2395 MHz
Built-in memory: 8145 MB
Free memory: 5646 MB
[code]....
i use more is "mantra standard" well i select the workspace , clicking on it
like in the first screenshot
but after shut down photoshop cs2 and start it again I find the workspace non chosen, selected like in the screeshoots 2
I tried to reset the preference but nothing sad.gif
I use xp sp2 with last update photoshop cs2 (italian version)
I am working on a visual presentation that I will print out as a booklet and each page is saved as a .psd. Is there a way to configure the psd file so that when I open that one file (call it the master file) all the images open up together. I'd like to know if this might be possible so I can avoid having to open each image/page individually.
View 1 Replies View Relatedhow to change the background color to black from the color gray once you load the program and have not loaded any files to work with. I really like a black background to do editing with.
View 1 Replies View RelatedWhat versions of Photoshop CS6 have the 3D workspace feature?
View 1 Replies View RelatedIs there a keyboard shortcut to copy the entire project your working on into another project (as in another tab window).
View 3 Replies View RelatedI cannot see the bottom of my workspace. I have tried different views and different workspace configurations.when I open an image it is halfway cut off at bottom of screen and I cannot scoll it up with track pad or mouse.
View 6 Replies View RelatedWhen I open photoshop, the workspace won't appear. It's layers show up on the layer menu, but the image and workspace are no where to be found. Entering full screen mode freezes. If i open photoshop and delete my settings, it fixes everything, but i am getting tired of setting all my settings back up every time i do this.
View 12 Replies View RelatedWhen I'm working in photoshop CS2 there is allways one big issue bothering me: all the menu's that are in the way (Tools menu, Layers menu, navigator, history). Does anybody know a shortcut to hide those menus all at the same time, and a shortcut to make them reappear?
Another thing that could solve my problem is to be able to zoom in outside of the picture (into the gray area), now I'm restricted to stay zoomed into the picture (so the most left pixel will also be the most left pixel in your photoshop screen, if anybody knows how to change that..
Using Photoshop CS3 on Windows XP
Any documents opened in Photoshop have a yellow tint to them. Even new blank documents have a sick yellow overtone.
All other Adobe products including bridge display documents correctly, and all menus/panels in PS are shown correctly. The color problem is strictly within documents in Photoshop.
I've attempted to change all the color settings (RGB modes, Conversion Options, etc.) in several documents with no change. I've also closed Photoshop, located my .ICC and .ICM files in "program files/common files/adobe/color/", renamed the "Profiles" and "MPProfiles" directories and restarted Photoshop. Did not change.
I'm using ACER and LG monitors, which both seem to display everything else properly but both are showing the yellow tint on the PS docs, although the ACER (being a brighter monitor) shows more yellow than the LG does.
I use CS2 on Windows XP.
Is there any way to make my saved workspace come up automatically (instead of the default workspace) when Photoshop opens? I always forget to change to my workspace until
I am working and none of my key shortcuts work.
you know how by default for mac photoshop there is no background workspace, it just shows the desktop with the pallettes on the side and windows by default has a gray background...is there a way to get rid of the gray background completely?
View 1 Replies View RelatedI have now installed CS4 to my laptop. Is there an easy way to copy my Photoshop and Bridge workspaces and preferences from my desktop?Desktop is XP, laptop is Vista..
View 2 Replies View RelatedWhen i'm in Photoshop CS2, I set-up my workspace to my liking ( large image size with rulers around the screen) and then save it and give it a title. The next time I open Photoshop, it opens with a very small image and I have to click on the maximize bar to enlarge it. Should it not remember my workspace preference?
View 9 Replies View RelatedHow are you all? I just have a quick question. Is there a possible way that I can get a workspace I have and transfer it onto my other computer? The thing is, I customized it, (the name is "00001") It is not a preset one that came with photoshop.
View 4 Replies View RelatedIn PS CS3 you could open as many graphical files as you wanted, move them around on the scrren, edit them, then create a new file and copy those into it creating a composite image.
Now, with CS6, I haven't figured out how to do that yet. If I load an image, it takes up the entire workspace, with rulers going negative to hugely positive with no reason to do so. If I load another image, I can't see them both unless I tile. if there is a way to put ALL files, say 10 of them all on ONE workspace at once? I'm almost ready to go BACK to CS3!
where my custom workspace are stored. I want to copy several I created on my desktop to my laptop. Have looked extensively without success.
The ability to create customized work spaces and quickly jump between them was a major leap forward in PS. How the CS6 migration grabbed my workspace from CS5. Now I want to copy them to my laptop, too.
My problem is that when I open a new image, the image window floats behind my left-sided panels.
I really want it to default to a location that I set for any new document that is created or image that is opened, but I can't figure out how to save that location and I've searched online and in the preferences.
I just downloaded the trial version of cs6 extended, but the 3D workspace is not included.
View 3 Replies View RelatedI recently did a upgrade to my PC and had to reinstall Windows 7 and all the software/programs on my PC. I have Photoshop CS5 working fine and all, but one thing it is doing that it never did in the past is ...
I set my workspace up to how I wanted it to be - put my history pallet where I want it, loaded all my brushes, actions, etc. it used to always be there when I opened PS up the next time. Now, since my PC Re-install, it seems to go back to default ... is there a way to stop this ?
PS CC won't save a custom workspace. Nothing happens. In addition, I get a "Can't apply workspace because of a system error" when i try to view the What's New workspace. Just downloaded the CC today. Mac 10.7.5, 3.4 GHz processor, 16GB RAM.
View 3 Replies View RelatedI just installed Bridge and PS CC. When I open a photo in PS no photo appears in the workspace. It shows the photo id at the top and the doc size at the bottom, but no photo in the workspace.
View 6 Replies View RelatedTrying to move my PC CS5 Photoshop and illustrator shortcuts and workspace, and Photoshop presets, into CS6 on the mac pro retina,
PS & AI shortcuts and work-spaces,
PS presets (including brushes).