Photoshop :: Wide Gamut Calibration?
Feb 27, 2012
A very similar problem as discussed, but not solved before:[URL]...Planar 26-inch Wide gamut LCD, Eye One Display 2 and latest Lightroom. Just upgraded to Win7 64bit and kaboom. After hardware calibration and profiling all colors in Windows looks great but pictures from my camera (GF2) look dull in LR and don't match what I see when save for Web and look through the web.
Same images opened on calibrated XP machine looks fine, all colors are as expected. If I don't use hardware calibration on Win7 machine and just tweak the sliders in control panel->color management the colors look somewhat off but not dull and consistent and behave as I expect and used to. I've tried both ColorEyes DisplayPro and i1 Match programs in simple and advance modes with the similar (bad) results.
View 9 Replies
ADVERTISEMENT
Sep 8, 2008
Though not really a PS question, this is the community that is likely to understand my concern. I'm investigating getting a wide gamut monitor( prob Eizo or NEC), but other forums say that there are issues. Some of you are probably using wide gamut monitors, so I thought I'd see what you think.
The concerns seem to be when using the monitor for non-imaging applications, since not all other applications are color managed. "They" say that sRGB JPG's look especially bad on the webb. I would think color managed stuff should be OK. What do you guys think? Worth it or not?
View 4 Replies
View Related
Dec 25, 2008
I've just installed a new Dell 2408WFP wide gamut monitor and will be using it with PS photo editing. I plan to purchase an Xrite i1Display2 for calibrating this monitor. I'm a bit confused by some postings in other forums about whether a WG monitor can be properly calibrated by this (and similar) colorimeters.
View 3 Replies
View Related
Apr 7, 2012
I have a wide gamut monitor (HP LP2475w) which has already been calibrated. My question isn't so much about that, but the settings I should be using inside of Photoshop (CS5). As far as color settings (ctrl+shift+k) goes, what am I supposed to use? I have sRGB as the rgb working space right now. (never use CMYK), Gray % Spot = dot gain 20%, and preserve profiles are ticked on for all 3. Am I supposed to be using Adobe RGB in RGB working space to get the most out of my monitor? I'm asking because it would be embarrassing if I had a wide gamut monitor and am working within a sRGB color cap. What are the proper photoshop color settings, so that it works well across the board (browser compatibility, etc)
I am a professional digital artist who specialize in illustrations for print campaigns. So far from what I've seen, whatever's been printed out of what I produce from this monitor has come out pretty much looking the same, so I'm not worried about that. Again, I just want to make sure I'm not careless and am using settings which doesn't make use of a wide gamut monitor.
View 9 Replies
View Related
Nov 1, 2012
So, after many trials and studying websites that take images seriously on different monitors I'm considering giving up trying to get converted sRGB images from my wide gamut monitor to look good in my browser. Sure if you convert to sRGB, in a wide gamut setup, the image will look good on old monitors.
BUT it won't look good on the new ones. Nobody talks about that. It really seems that some of the high end coporate sites are already converting to adobeRGB and putting images on the web that are converted to AdobeRGB and not sRGB. The photos look great in my browser on my wide gamut monitor and those sites' photos seem washed out on the sRGB monitors I used on the same sites.
There is no way for me to know for sure sinced the images are untagged but when I download them and apply the AdobeRGB profile to them, it looks just like in the browser. The sRGB profile washes out the image. Look at [URL] ....
View 34 Replies
View Related
Oct 5, 2012
I'm editing an sRGB image. My custom proof condition is set to sRGB IEC, preserve numbers unchecked, intent PER or RC, BPC. Gamut warning is turned on.
I add some text and color it using the text color selector tool. I enable gamut warning in that and choose an out of gamut color such as #ff0000. I return to the image and the the text is *not* flagged as being out of gamut.
In fact *no* color flagged as OOG in the selector seems to be considered OOG once I return to the image with sRGB IEC selected, though they are when I select other devices to simulate.
Why the disparity between the image OOG warning and the selector tool? Is the tool using a different simulated device to that I've selected?
View 5 Replies
View Related
May 4, 2011
I have got a logo that is 451 x197. It has a resolution of 72 px. I am trying to increase the resolution so that I can use the image for business cards and letterhead.
I need for the image to have a width of about 2500 pixels. If I scale the image to 2500 pixels the edges look pixelized or blurry.
My question is: Is there a way that I can make the 471 px logo stretch to 2500 px and still have sharp edges?
View 3 Replies
View Related
Jan 29, 2009
1. I'm using CS1 and have installed my printer profile. I assume this will show me what the colors will look like when I convert the photo to the printer's color space (to do this I usually choose IMAGE - MODE -CONVERT TO PROFILE
Why then when I turn on the Gamut Warning, does it show that there are colors out of gamut?
2.When I load a photo with an embedded profile and I choose the option of USE THE EMBEDDED PROFILE INSTEAD OF THE WORKING SPACE do I still need to go to PROOF SETUP and choose the printer profile to see the colors as they will look when printed? Or is this doubling-up on the conversion process.
I would have thought that choosing the printer profile to proof a photo that has already been converted to the printer color space should not show any difference. Unfortunately it does, so I'm not sure which is the accurate one.
View 2 Replies
View Related
Feb 20, 2013
So I've been having this issue with Photoshop ever since I started using it on my Windows machine. On my Mac. I could set something to any color and it would appear that way on the screen in RGB mode. However, when I try and do that with the same exact color on my Windows machine it appears in black. I don't have Gamut Warnings on either. However, when I switch the mode to CMYK the color appears. The problem with this is I use photoshop for GUI's and such, not print materiel so if I have it show in CMYK Mode it will give me an inacurate look at how the colors will look.
View 2 Replies
View Related
Apr 27, 2004
I just want to know the secret to the gamut warning. I am in a Photoshop class and we are currently doing color correction. My color corrected image looks good, but my image still has a gamut warning. I know that every image is different, but what are some of the basic things ya'll do to get rid of the gamut warning? Is there any type of conversion that you can do that'll get rid of it?
View 1 Replies
View Related
Jul 7, 2004
I was getting a photo ready to print yesterday and checked the out-of-gamut colors and almost the entire pic turned gray. :-) There was a lot of grass in the scene and the greens were too saturated I guess. So I unchecked OoG and did a soft-proof, and sure enough the greens dulled down a bit.
So my question is: Why fix out of gamut colors if they'll get "fixed" when they print anyway? I mean, there's not much I can do if the printer can't print such a bright green, right?
Also, what's usually the best way to fix them before I send it to print? Just lower saturation? Is there a way to select the OoG colors so I can lower saturation on just those?
View 3 Replies
View Related
Apr 18, 2013
When I have sRGB selected as my color space in Photoshop (CS6), often I see the out of gamut warning in the color picker. I expected every possible sRGB color value to be within the sRGB color gamut, but apparently I was wrong. I would like to see a horseshoe color space diagram that shows how far the values extend beyond the gamut.
I guess this occurs with all color spaces - you can select color values that are outside of the gamut. I'm not sure what the color space diagrams represent, but I'm guessing they represent the gamut.
View 7 Replies
View Related
Jul 16, 2006
When you click the color picker and you choose a color, sometimes the "gamut warning" box appears.
(1) What is gamut?
(2) When I choose a color and the box appears, should I click on it or should I just ignore?
View 4 Replies
View Related
Jul 21, 2012
I have decided to put an DDR5 ATI card in my new Win7-64 build for editing photographs, compositing, etc. As I have used nVidia up to now I am unfamiliar with the ATI lines.
I have looked at both discussions here and the ATI site, but it isn't clear which cards will best drive my ASUS higher-gamut monitor. I have to build a new system right now. (Willl not overclock a i7-3770 or use two GPU cards linked with Crossfire. No plans for any gaming.) I would also like to keep this part of the build at a couple hundred or less. I saw that FirePro boards range a lot higher than Radeon, which I realize is gaming-oriented.
I hope to get DVI and Displayport as outputs. I use two 24" monitors, and the older unit can accept only DVI (or VGA, which I would avoid.)Any thoughts about the current ATI line for higher gamut?
View 6 Replies
View Related
Feb 9, 2012
One thing that I just can't work out is why the gamut warning in GIMP is so much greater than in Photoshop.
View 5 Replies
View Related
Jun 11, 2013
1. Is there any benefit to using the ProPhoto color space when one's monitor is only standard (sRGB) gamut?
1a. Ditto Adobe RGB with a standard gamut monitor.
- What is the use of retaining more colors if you can't see them?
2. Are there any possible DISadvantages to using a wider colorspace than you can see?
3. If printing, how can you softproof your photos and visualize the printer output, if the file contains colors you can't see on your monitor?
View 44 Replies
View Related
Nov 11, 2013
I am working on something that will only be seen on a computer screen, and I want to use out-of-gamut colors, but I can't find a color profile that will allow it. Is there any setting I can use that will allow me to use out-of-gamut colors?
View 10 Replies
View Related
Jan 23, 2014
For, my printer, we need to use the Adobe RGB colorspace. But maybe the printer is even more limited in some areas than that color space. Is there a way to know?
View 2 Replies
View Related
Mar 7, 2014
I inherited a color from someone who has departed my company. It's a lovely, bright blue. He has rolled out this blue in all of our UI...that rebranding is complete. Now I come in to update the other corporate materials around this shade of blue only to find that it is out of gamut. When I click to correct it, I end up with a totally dull and lifeless shade of blue. The contrast between these two blues is really quite severe. No one except a color-blind person or maybe just a blind person would think they were the same. I am at my wit's end. One thing I am thinking of doing is getting one of those Pantone books and try to find a suitable blue using my own eyeballs because all of this has occurred on my computer monitor. Do you think I will find a better match that way or do you think Illustrator is tops at finding the right substitute?
View 6 Replies
View Related
Jun 28, 2006
Is it any different than CRT calibration?
I just don't think my colors are correct.
View 3 Replies
View Related
Feb 24, 2008
I have a lacie electron blue iv 22 crt as a main monitor that runs great and i don't see myself replacing any time soon, cheapo NEC 17" LCD as a secondary and both running off an XFX nvidia geforce 7600gtx. the lacie is running analog output and the nec is running digital.
I get good color from the lacie and on all my prints (oly 330n and kodak 1400 pro, both are dye sub printers). still using adobe gamma from cs2. is this something i need, or should i just stick with what works. (i guess the answer is stick with what works, but do you guys think i would actually GAIN anything by going for this.)
View 5 Replies
View Related
Dec 14, 2012
I am looking at an image which has some red areas that are out-of-gamut in the soft proof profile I'm using. It's difficult to preview the areas as red is used to highlight those areas. How can I change the red to be some other color?
View 9 Replies
View Related
Jun 9, 2013
When I try to use "Auto" correction in the new Adaptive Wide Angle filter, it pops up with "No matching lens profile found". I searched for information and was directed to go to the Lens Correction filter. I pressed the "Search Online" button. The first time it comes back with "Connection timeout", but the second time it says "No online profiles found". Come on, really?!
ACR has my lens profile (Canon 24-105 f/4 IS), why can't PS CS6 find it? Is there a workaround? I'd really like to use the Adaptive Wide Angle filter.
View 6 Replies
View Related
Oct 19, 2008
The Photoshop CS4 layers palette is too wide and distorts the layout of the default color swatches palette when docked on the same column. And I don't want to have to put the color swatches palette anywhere else but the same column. Can the layers palette be fixed so that it can be as narrow as the other palettes, so it won't cause a conflict with the swatches layout?
View 15 Replies
View Related
Jun 21, 2012
There is an vast amount of information on this topic, that topic being LCD monitor calibration. Some LCD have presets, theater, games, etc. I want to calibrate my LCD so that if someone else is viewing my work on their monitor and they complain it is too light or to dark, I can say it is your monitor.
One of my LCD has two presets that are of interest 'standard' & 'sRGB' my other LCD doesn't have any presets. What is the best or near best calibration I can manually set both monitors too, if this is even possible on LCD.
View 57 Replies
View Related
May 1, 2013
When we slide the saturation slider for a primary to the left end (completely desaturated position), does it mean that we move this primary to the white point on the chromaticity diagram?
View 2 Replies
View Related
Aug 24, 2006
I was wondering what people were using for a calibration tool for monitors. This is not my profession so I am not looking to spend $500+ on a calibration tool but it seems like there is some fairly good units out there for under $300.
View 2 Replies
View Related
Oct 24, 2005
calibration hardware like Spyder?
View 4 Replies
View Related
Feb 24, 2003
How can I calibrate my monitor so that the photographic images I see on the screen matches what comes out of the printer. Have tried Photoshops monitor calibration. and have tried adjusting the the image's colour to match the print out The photographic images are in CMYK
View 3 Replies
View Related
May 5, 2008
i want to calibrate my monitor and printer and computer so they all read color the same way does anybody have any advice of how i can achive this with ease?
View 2 Replies
View Related
Feb 8, 2005
I've got an older iMac G3 OS 9 and am trying to use the calibration tools that came with the computer. When it asks to select a "white point" ....how am I to know what to use?
any recommendations as to monitor calibration hardware/software packages, spendy or not?
View 4 Replies
View Related
