Photoshop :: Why Does Zoom Keep Changing In CS6

Oct 10, 2013

I have just recently bought Photoshop, When I use the magnifier, it sometimes zooms on the left mouse button and zooms out on the right mouse button. Other times it doesn't do this. Why does it keep changing and how do I get it to stay on L/R button zoom? 
 
I have just created my new site that has many English teachers on Skype All this was done using Photoshop cs6 but I had the problem with the zoom the whole time!

View 1 Replies


ADVERTISEMENT

Photoshop :: Changing Percentage Of Document Opacity Or Zoom?

Jul 25, 2013

sometimes when trying to manually input the percent number for either layer opacity or image zoom, when I try to type a number I just get a DING sound and it wont allow me to do anything. It goes away after I click a bunch of random things, minimize photoshop and then open it up again. Why does it do this? All I do is click on the percent number, try to input a new number but it sometimes just doesn't allow me to do so. I check all around the document to see if there is anything going on that may interfere but I notice nothing. What is it trying to tell me when it just dings and refuses to change the numbers?

View 2 Replies View Related

VideoStudio :: Photo (judder) Changing Pan And Zoom From 4:3 To 16:9?

Feb 7, 2012

The old photos were scanned in at 300 dpi. Many of them were then cleaned up (spots and scratches removed, etc.) using Microsoft Digital Image Pro 10 (which we also did on previous projects). My wife then began creating her project essentially using all of the VideoStudio defaults. She added a custom pan and zoom to every photo so that the slide show has some motion, and the person or object of interest in the photo gets enlarged and emphasized.

Problem 1: as some of the photos move, there is a visible twitch or judder--not sure what word I should use to describe it. It's like the picture jiggles a little as it moves. The problem is not in the burn, the DVD player or television, because you can see it happening when you watch the preview of the project in the software, edit mode. It seems to be random, I cannot discern a pattern to which photos, where on the timeline, which transition, etc., is related to the issue.

Problem 2: my wife created this project for a 4:3 aspect ratio TV, so the crop box that was used for all of the custom pan and zoom was 4:3. I would like to create a new version of the project, with all of the photos re-cropped, re-zoomed and re-panned using a 16:9 box. The problem is, I cannot figure out how to delete or un-do all of the existing 4:3 panning and zooming. I have tried opening the program with the 16:9 box checked, then opening the project file, then deleting photos from the time-line, and re-linking to a new copy of the same photo. When I open the pan and zoom box for the photo, it has a 4:3 aspect ratio crop box! Note that if I start a new project and drop the same photo on the timeline, I do get a 16:9 box for pan & zoom. So it seems that 4:3 is associated with the existing project, and I can't figure out how to get rid of it. I really don't want to have to re-create the whole thing from scratch. Is there a simple way to be able to re-do the pan & zoom at 16:9?

I tried selecting all of the photos on the timeline, right-clicking, then choosing auto pan and zoom, to see if that would re-do it using a 16:9 crop box (which could then be customized). No joy, it again used a 4:3 box.

View 14 Replies View Related

AutoCAD Inventor :: Changing Zoom Function In 2D?

Aug 29, 2012

When I use AutoCAD Inventor:

* Rolling the mouse wheel toward me, the object zooms larger, and

* Rolling the mouse wheel away from my body, the object zooms smaller.

Just the opposite, when I use good ole' 2D AutoCAD and AutoCAD Electrical:

* Rolling the mouse wheel toward me, the object zooms smaller, and

* Rolling the mouse wheel away from my body, the object zooms larger.

Is it possible to change the zoom function in 2D AutoCAD and AutoCAD Electrical to operate in the same fashion as in Inventor . . .

View 2 Replies View Related

VideoStudio :: X4 Crashes On Changing Filter Options - Pan And Zoom

Aug 13, 2011

When I use video filter Pan & Zoom and I change options want to change the filter options, then VS crashes. The other filters work fine. I doubt if I put a video with this error.

View 7 Replies View Related

AutoCad :: Variable For Removing Zoom Extents When Changing UCS?

Feb 9, 2012

I'm looking for a command that I've forgotten the name of...

Under: tools/options/3Dmodeling/3Dnavigation/viewcube: "zoom extents after view change"

If you unclick that box the navigation cube starts behaving properly but if I remember correctly there is also a variable you can switch between 0-1 to achieve the same effect for all the navigation tools (not only the cube)

View 1 Replies View Related

Lightroom :: Zoom In And Crop Without Distorting Image Nor Changing Ratio?

May 9, 2013

I just bought the Sony DSC-RX100 camera.  I do a lot of landscapes.  Will Lightroom zoom in and crop without distorting the image nor changing the ratio?

View 3 Replies View Related

Photoshop :: Zoom: No Anti-alias ( Pixel-exact Zoom)!

Feb 15, 2006

I use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.

Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.

Is there a way to change this zoom?

View 3 Replies View Related

Photoshop :: Zoom Tool Defaults To Zoom Out

Feb 21, 2008

recently my zoom tool changed from default zoom in + to zoom out -

View 1 Replies View Related

AutoCAD 2010 :: Intersection Osnap Appears On Zoom Out But Disappears When Zoom In

Feb 22, 2012

The AutoCAD doesn’t show the “intersect osnap” at certain zoom!

The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!

As I zoom out the “intersection osnap” appears but when I zoom in, it disappears

Why the "intersection Osnap" should disappear as I zoom in?

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 2 Replies View Related

AutoCAD 2010 :: Middle Mouse Button (wheel) Set To Zoom All / Zoom Extents Double Click

Feb 27, 2013

I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it?  I thought it was set in the Main CUI file.

View 9 Replies View Related

AutoCAD 2013 :: How To Assign Keyboard Zoom + / - Key To Zoom A Drawing In / Out

Jan 8, 2013

My keyboard has a zoom key with + and - selections.  I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP.  Now that I have Windows 7 I can't do this.  I can't find out how to assign this key on the Microsoft Keyboard interactive software either.  I have the other keys assigned as desired.

Can I still use my keyboard zoom key to zoom in and out in drawings?  If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?

View 6 Replies View Related

AutoCAD Inventor :: Zoom / Pan / Rotation At High Zoom Level

Apr 5, 2013

I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.

View 9 Replies View Related

3ds Max :: Zoom About Mouse Pointer And Zoom Speed

May 27, 2012

I can't find in new max (2013) settings for zoom. I want to set Zoom about mouse pointer and adjust a bit zoom speed (now it is too much for one mouse wheel step).

I can't find zoom settings in 3ds max 2013. Where they are? I think that in previous max it was in Customize -> Viewports tab. But now it is not there.

View 3 Replies View Related

Photoshop :: Zoom In/Zoom Out In CS

Jan 3, 2004

I tried searching the forums for this topic but the search thing didn't seem to work.

A friend of mine installed Photoshop CS for me (an upgrade from 7.0) and for some reason I can't use CTRL + and CTRL - to zoom in and out, I have to use the mouse with the zoom tool which slows me down quite a bit over the course of 20 or so photo edits.

Can anyone shed some light on this? I checked Keyboard shortcuts in the preferences menu and they were correct. I've made no other changes to the program.

View 8 Replies View Related

Photoshop :: Changing A Layer Effect Without Changing All Layers

Jun 18, 2012

I'm using CS4. I have multiple layers of text and I want each one to have a different drop shadow effect. When I try to chnge the settings of one layer's shadow, all the layers change. Is there a way to stop this?

View 2 Replies View Related

Photoshop :: Changing Text Only In An Image Without Changing Anything Else

Sep 7, 2006

I have an image, I just need to changethe text in that image without changing anything else.

View 5 Replies View Related

Illustrator :: How To Stop Changing Stroke Weights When Changing Size Of Object In CS5 On Windows 7

Mar 20, 2013

I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?

View 3 Replies View Related

AutoCAD Inventor :: Changing Extrusion By Changing Sketch Results In Errors

May 9, 2013

The attached files are two sprockets. The original part has 30 teeth. I need 34 teeth.

The MODIFIED part has one of my attempts at making 34 teeth. I have tried the following with the same error dialog box (see below):

1. Edit Sketch_6 (associated with Extrusion1) by deleting all but one of the teeth lines (2 arcs and 2 lines that make up a tooth) and making a circular pattern of 34.

2. Same circular pattern, except this time I "Close the Loop" (right-click on one of the teeth line segments > Close Loop > click on all the segments until the loop is closed).

3. Same circular pattern, except this time change the resulting patterned lines into construction lines, trace these lines with arcs and lines of my own (not construction lines), and close the loop on my own lines.

When each of the 3 attempts failed, I tried deleting Extrusion1 and making a new Extrusion feature from Sketch_6. I cannot select what I want in Sketch_6 in order to make the teeth.

I'm at the point where I'm just going to take the dimensions from the circular pattern sketch of 34 teeth, delete Extrusion1 and Sketch_6, and make my own sketch and extrusion.

For the future, I really would like to know - why is it so difficult to alter features like this? Yes, I understand that Sketch_6 is not fully constrained, and on top of this I am not privy to how it was generated in the first place (this is a part file from a vendor). But it does not strike me as something overly complicated for the Extrusion feature to recognize a change in its associated sketch. This is not the first time I have encountered something like this.

View 1 Replies View Related

GIMP :: Changing Size Of The Image - Width Changing

Mar 17, 2013

I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.

The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?

View 1 Replies View Related

Photoshop :: Changing Opacity In Selection On Layer Without Changing Entire Layer

Aug 21, 2013

I've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do.   I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark.  On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area.  The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity. 

I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer.  No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
 
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.

View 2 Replies View Related

Photoshop :: Zoom In?

Sep 15, 2006

A man has a new picture and duplicated and he zoomed in while the picture is normal. He used the patch tool when I saw the picture automatically patch the normal picture as well. I've a nornal picture and I duplicate and zoomed in to fix but my normal picture doesn't automatically fix . How do I do?

View 1 Replies View Related

Photoshop :: Zoom In And Out

Jan 22, 2005

way to zoom in and out without having to click on the zoom tool and then Alt Click to zoom out ? I find this a little slow.

View 9 Replies View Related

Photoshop :: Down Arrow After Zoom

Aug 16, 2012

If I zoom with the mouse scroll "alt scroll" then press the down arrow it opens my file menu, this is 100% reproducible. Zoom any other way will not open the menu. I have searched the shortcuts and can not find any shortcut associated with opening the file menu. 

BTW windows 7 system , fully updated cs5.

View 3 Replies View Related

Photoshop :: Pan And Zoom Effect

Oct 22, 2013

How do you create a pan and zoom effect, like a video effect, on a picture? The technical term I believe is the Ken Burns effect from a still imagery. I know it can be done in Adobe Premiere, Final Cut Pro but I want to know if it is possible in Photoshop (CS6). It tried the options using the motion control but all I got was a fade out and fade in between two frames created from my image.Screen capture from Photoshop with the motion control window activated:

View 2 Replies View Related

Photoshop :: Zoom Lag - CC - OSX Mavericks?

Nov 7, 2013

It's about two days I am experiencing lag problems with Zoom Tool on Photoshop CC. The strange thing is that the problem appears only two days ago, when instead I've installed OSX Mavericks on my machine about two weeks (the day of the Public Release)

You can notice that from the moment I finished drawing the "zoom square" and the real zoom lapse about 1,5s (same thing for the Scrubby Zoom).
 
I've tried to uninstall and reinstall Photoshop, disable plugins and reset tool preferences but unfortunately with no success.

Here are my specs:
Macbook Air Mid 2012 with i5, 8GB Ram, 128GB SSD
Photoshop CC 14.0

View 4 Replies View Related

Photoshop :: CS5 Zoom Isn't Functioning At 33.3% Or 66.6%

Sep 14, 2013

I have photoshop CS5 and recently my zoom is malfunctioning.  I draw on adobe, and more of the time when I zoomed and zoomed out my images still look consistant and smooth.  Yesterday, my zoom at 33.3 and 66.7% isn't properly functioning.  It distorts the pixels at these zooms, which makes it difficult to see and draw.  It used to never do this, and I also didn't change anything in my photoshop to cause a change. Is there anyway I can reset the zoom how it was before? Or reset photoshop?

View 4 Replies View Related

Photoshop :: Transform And Zoom

Dec 20, 2011

It would be nice to zoom in and out to check a transformation without applying it.

View 2 Replies View Related

Photoshop :: CC Slow To Zoom

Oct 19, 2013

Recently was forced to switch back to Win 7 from OSX after many years. I have the lastest PS CC on the Win 7 machine with 8 gb of RAM installed and an i5 processor. I haven't used PS on Windows since CS5 maybe CS4.
 
Admittedly this is not the fastest or best equipped computer in the world but then I am only doing web design at 72 dpi. I do use allot of layers though but that is nothing new.
 
Whenever I click to zoom in or out the disc starts thrashing and there is a long delay resulting in nothing happening. I have to click to zoom a second or even third time before I can get it to work.
 
As an example I will use a file that has allot of layers but is 14.1 mb on disc it is 1.3 gb when open. On a Macbook Pro 2011 with 4 gb of RAM I have no issues with zooming with open GL on or off. The Win 7 machine, same file, has significant zooming issues.
 
I have only one disc in both machines. The Win 7 machine has Mcaffee anti-virus on it but no disc encription. The mac does not have anti-virus installed. I am quite willing to either increase the RAM in the Win 7 machine or get another HD to use as the scratch disc but I don't want to push my boss to make a purchase unless I am sure it will solve the issue and I am not convinced it will.
 
Would buying hardware solve the issue or would adjusting the preferences somehow solve it. My preferences for performance on both machines are the standard settings PS ships with.

View 2 Replies View Related

Photoshop :: How To Quickly Zoom In And Out

Aug 9, 2011

I'm just trying to zoom in, I know I can change the zoom in the bottom left hand corner but I can't see how to quickly zoom in and out...?

View 3 Replies View Related

Photoshop :: Zoom In And Out Is Not Working

Mar 1, 2013

im using a laptop and the zoom in and out (up and down on scroll pad) wont work , is there a way ive locked this out

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved