i've made a template in photoshop for a website i sliced all the images i wanted, like my content box etc, how to change the code so i can write things on the webpage when its in a html editor,
View 3 RepliesI have always done up templates in photoshop and from there transformed that template into html in dreamweaver, but yesterday discovered in dreamweaver thast you can output these templates into css format web pages....... my question is which is better hand coding it your self or letting imageready do the job for you.
If you do an entire web page from image ready does it not leave a huge amount of unneccessary graphics in your file, and also from the point of search engine optimisation are you not leaving all your key wiords out as graphics? can you delete certain parts out in dreamweaver and re fill with html colors and text?
I have seen somwhere that you can colour code important commands to whatever colour you like so it is easier to pick out, for example if you use the shadow and highlights that menu would be a certain colour or gaussion blur, you could highlight it in a certain colour so they stand out.
View 1 Replies View Related1. Get a picture of a car (or something else), and a picture of some matrix code.
2. cut out the car using the magnetic lasso and paste it on as a new layer on the picture of the matrix code.
3. Go to image, adjustments, Hue/Saturation., and adjust it so it looks like the color of you code.
4.Copy a large square chunck of code and place it on a new layer.
5. The go to Edit, Define Pattern, and call it matrix.
6.now go to your car layer and click a part of the picture other than the car and ckick on it with the magic wand tool. Then right click on that same spot and click on select inverse, then copy it.
7. Now drag this layer over the layer of the matrix code and erase around it until it fits in nicely with the rest of the code. (don't erase too much.) Then press control+E to merge the two layers into one.
8. Duplicate the green car layer twice, and set all three car layers mode to vivid light.
9.Then mess with the Hue/Saturation menu until you car blends in nicely.
(Optional part which I did on the picture posted here)
10. Press the print screen button and copy and the paste image you get into a new image. Then use the magic wand tool on the car from your original image and copy and paste it on top of the new matrix car on a new layer.
11. Then while the lines are on the car you pasted, go to the car that is already there and copy and paste it onto a new layer. Then delete the first car you pasted in.
12. Mess with the Hue/Saturation on the car layer until it blends in with the matrix coding even better.
How Can I Select All Blocks Attributes Using VBA Coding
all blocks with any name with any layer with any property
I have been attempting to create some of my own line types by modifying the coding in the acadiso.lin file. I have been relatively successful in creating new line types but it is more by trial and error and wanted to understand the coding better.
View 2 Replies View RelatedWe are using the linework coding to process our figures and the survey .txt file provided to me uses codes to begin lines with "+" & "-". For example, driveways are coded + DR1 for begin and - DR1 to end the line. The linework process works fine, its when I go to display the point in the description keys that are causing me problems. All the points that are in between the begin and end points display to the appropriate style because they are coded as DR*. The begin and end do not display correctly as the + & - isn't being recognized in the description key. I tried many alternate ways such as *DR*, + DR*, - DR*, with nothing working.
Is there a different format I need to be using? There are way to many points to go thru to move the + & - behind the code.
I need to transform a selection of ranges of grayscale image in colors. For example: using GSM of a gray scale image as a parameter I want to recode pixels from 0 to 20 in red, 21 to 40 in orange, 41 to 60 in yellow and so forth... until pixel valued 256 in GSM.
View 2 Replies View RelatedI color tagged a series of photos....with green. Now I want to remove the color labels and have no label at all.
Using LR3, on a Mac.
I found all of the javascript on my Expression Web 4 project coding had lost its color coding. All the text was black.It doesn't matter if the code is in a js file or in a html page.I tried, Tools > Page Editor Options... and Color Coding Tab, going to, and changing Display items called "Script ??????". But it doesn't fix it.
The only one that seems to work is "Script Identifier", and that changes all of the script to one color.Later in September I did a bit more.
I went to System Restore and restored my computer to a date two weeks previous.This fixed the problem. Color Coding for JS files in EW4 returned.I then started to install the Windows Updates and Programs that where installed in this period, until the problem came back. (Color Coding for JS files disappeared.)
The problem seemed to come on when I install Corel Paintshop Pro X4 (trial Version).At the same time I installed PSP X4, DirectX was installed. I don't know if PSP X4 had anything to do with the DirectX install.
If I uninstall PSP X4, the problem still remained with EW4.The only way to restore the problem with EW4 was to use System Restore again and restore to the state before the DirectX Install.
Today 20th November I did some more testing.Again my color coding for javascript went back to black.
I've had a couple of Windows 7 updates recently, (KB917607, KB 2607576 and also SP3 for Microsoft Office 2007) not sure if this bought the problem back on.
Apart from many other programs, I have:
Expression Web 4
Corel Paint Shop Pro X4
Corel Video Studio Pro X4
Today I thought I would do a bit more testing. I reloaded PSPX4 using file PSPP_X4_PF.exe This caused the color coding for javascript to go black.
I thought, what if I reload it again on top of the existing file. BUT I accidentally reloaded Video Studio X4 (File VSX4_Pro_TBYB.exe) Running this file a second time (File VSX4_Pro_TBYB.exe), actually asks if you want to remove Video Studio X4. I said no and cancelled.Now I went back to EW4 and the color coding for Javascript had miraculously re appeared.
When I reboot the PC and go to EW4 javascript, the color coding has gone.When I run Video Studio X4 (File VSX4_Pro_TBYB.exe) a second time and do the cancel, the color coding comes back.
I can do this any amount of times,
Reboot - no color.
Reload VSX4 - color returns.
Reboot - no color.
Reload VSX4 - color returns.
Something seems to get loaded on the initialising of VSX4.
Currently I am working on a project which required to convert the FDO layer to DWG file through custom coding
( C# ) .
Addition Information :
I am using FDO for fetching oracle spatial data which is displaying as a layer in AUD modal space.This layer I need to save as DWG file through Custom coding ( C#).
I have noticed quite a performance hit when coding the same thing in .NEt compared to VBA. I suspect this to be due to out of process calls between .net and Inventor.
Is there any way to bundle many calls and send them as one.
Example: I want to change the parameter value of a constraint and then update the assemblydocument. Can this be bundled into one call to Inventor?
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.
I have looked into using different view representations, but have found that they do not accommodate feature supression.
Is there a way to program in the dimensioning of a view.
Create center points for of the holes and center lines.
And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.
I am setting up template .ipts and .idw for my company, and i run Adept to save and store my files. Now i have a code to automatically make a .idw after i save an .ipt. but then after every save (adept saves the .ipt a lot of times) it will ask to make a drawing for the .ipt. well i was wondering if there is a code to put in a rule to disable the event triggers, and place that rule on the trigger after close document. so that the next time i open the document no event triggers will work.
View 1 Replies View RelatedWe are trying to switch over in our office to importing all the points with linework already drawn in from the field. Our problem is when we are toping an area with a roadway, we commonly do cross sections. We get 2 of every line, such as the edge of pavement. I have set up our C3D to handle all our codes, but if our crews jump from one side to the other with their linework it will create a zig zag line instead of 2 parallel lines. Does C3D recognize the line code along with a number?
For example, our code for edge of pavement is EP. So the start of a pavement line would be B EP. Since there's 2 lines, we're wondering if we can do something like B EP1, then use B EP2 on the other side of the street. Will C3D still import both of those lines onto the EP layer that I have set up?
How can you "hard code" a link code or point code into a subassembly? I can use Input parameters to create the code, but then the user has the ability to change the code once in C3D?
how can you lock the name of a point or link code?
I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.
I have looked into using different view representations, but have found that they do not accommodate feature supression.
My questions are:
Is there a way to program in the dimensioning of a view
Create center points for of of the holes and center lines
And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.
I have an App developer that is requesting an .AI file for developing an App that can be utilized on all the following Apple hardware (iPhone 4, iPhone 5, iPod touch, iPad, iPad mini). He is insisting on it, because of the vector file. I have a design file that was completed in a layerd PSD. I want to know what, if any, quality is lost from converting from PSD to .AI vector file? Would it be better to have the Designers strach over from Scratch?
View 1 Replies View RelatedI wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies View RelatedI just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies View Relatedon designing a street map showing the location of a clients facility. I thought about using something like Google maps, and masking the part of it I need, but I'm not sure about the legality of doing that. I'm also having a difficult time making the edges look nice and smoothe.
View 2 Replies View RelatedI'm trying to create an image like the one below (just the red part),
View 3 Replies View RelatedI am already running Photoshop CS3. I recently bought the design standard package. I would like to install it on the same workstation. I was wondering, Since my current CS3 is alread registered do I load Design Standard CS3 and just not choose Photoshop CS3 at the beginning of the Design Standard install process? Will I be able to use my Design Standard serial number to register the product and have it not effect my existing registered version of Photoshop CS3?
View 1 Replies View Relatedi just wanted a simple portfolio page and its takin me a while but i like the way this design came out. Theres gonna be some small animation on the page but mostly just a business type feel.
View 2 Replies View RelatedWe designed id cards (having width:1062 , height:672 pixels and resolution:300) using background of width:2560 and height:1600
Eventhough we use backgrounds with high resolutions,while printing in ID card machine,there are strokes in between.We couldn't get good output.What could i do.
Here is the background i used . How to design our own backgrounds?
I used to know how to do this two years ago and now i'm in a situation to where I have to KNOW this.
My question is how do I combine slices once i've made them throughout the layout?
I am playing around with a new (to me at least) PS plug-in called SiteGrinder. It's a web site building prgm. that helps novices like me design and build web pages via a PS plug-in.
I wanted to create the pinstripe look in the background of Adobe Lightroom.
How do I get that look?
I am looking for a couple of plugins that can help me add texture and draping effects to my clothing designs, which at the moment don't even look 2D. Am looking also for something that will help me design and implement patterns, such as checks with out having to copy and paste. The easier to use the better as I do not know Photoshop CS that well.
View 6 Replies View RelatedWhen I resize an image to a smaller size line and so on dont stay as sharp as they did from the original size....is there a way to prevent this?
Resizing up or down requires a remap of the pixels so there is almost always some interpolation and therefore softening.
But when resizing down you can improve the quality by picking you scale percentage carefully. If you scale to fifty percent, for instance, the interpolation can toss every other
pixel rather than interpreting inbetween them. I have had some improved results (I think)
by using this method. In theory scaling down 25 percent tosses every forth pixel... 75 percent, 3 of out of four. So you might try scaling to on of these first and then doing another scale from there. It may seem counterintuative to do two scale and get a better result but I had a job a few years back that required holding the sharpness of a grid when scaled down. Back then I tested this and it seems to work. But it has been too long and so I wouldn't bet the farm on this one.
The other option is to set the interpolation method to Nearest Neighbor. This method doesn't fade between pixels, it just replicates or tosses the existing ones. It will keep things like lines sharp.
I am trying to determine how to build a site that breaks out of the typical "tabled" layout. I've heard that CSS is good for layout, but not sure the tabless effect I am looking for requires CSS, or just good background design in Photoshop.
My experience is more with HTML sites, incorporating FLASH (made with SWiSH) elements, and PHP for database. I code everything by hand, no use of apps such as <HACK!> Frontpage.
I have designed a webpage using 1024*768. After output the design as html, the page does not display in the whole browser.(There are white space at the right side and the bottom of browser) My screen resolution is 1280*1024.
how to make the design of the page fits any browser with bigger resolution?