I'm using liquefy a lot lately on imagery with straight-line objects. Is there a way to project guides inside the liquefy workspace? Displaying a mesh doesn't cut it as the mesh polygons get distorted as you work. I just want some straight perpendicular guides (like in the "normal" edit windows) to follow.
View 7 RepliesAll of a sudden, when I try to use Liquify in CS6, I get the following warning:
"Liquify is capable of utilizing the Graphics Processor on RGB files to increase performance. The color mode you have chosen will not utilize the Graphics Processor."
If I click OK and continue, the image is just blank inside Liquify. It used to work just fine. I am in ProPhotoRGB colour space.
I have a number of vertical and horizontal guides to be placed, at different points. Is there a better way of placement rather than zooming up on the ruler area, watching the Nav coordinates and dragging and dropping? I'm really looking for a method which will I can key in the actual placement coordinates in some way, and the guide will jump to this point?
View 6 Replies View RelatedWhen I try to drag an image out of project bin to an image in the workspace my program crashes. I have reinstalled the program but still doing this. All updates are done and I'm at a loss as what to do.
View 5 Replies View RelatedI'm trying to work on a project I created a few months ago in Edge. However, when I try to open it in Edge Animate CC, it just displays a blank screen (See image).
The timeline, the canvas, the properties, nothing seems to be populated. If I drag the time line back to 0:00, an alert pops up saying "An error occured. Please save your work and restart Edge Animate." The exported HTML file still seems to work fine though. I've tried uninstalling and reinstalling Edge, but that hasn't seemed to work.
EDIT: This seems to be an intermittant problem. Sometimes, the file displays correctly, sometimes it doesn't. If I close the program and open it again, the issue re-occurs.
What I mean:
Draw an ellipse. Skew it with mouse.
Draw a rectangle to allign with ellipse's outer dimension by Alignment Guides (not by Align and Distribute command).
Now the aligned side of the Rectangle must be tangent to the ellipse BUT it's not! To verify, try to search an intersection point. Draw a Guideline and snap it to the rectangle's aligned side. It must be intersection point between Guideline and Ellipse but there isn't...
CorelDRAW X6
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View Relatedis there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View RelatedI really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies View RelatedI have a really large sphere and have put a camera on the inside to see the inside surface. I have used the normal modifier to flip the normals and so have the skin on the inside. Something is going very wrong at this point because I have this ugly shadow line that I cannot get rid of and I also seem to not be able to light this interior, when I use an omni light it makes no difference. Where am I going wrong?
View 7 Replies View RelatedI'm having issues with importing an image I created in photoshop that has a background transparency into another photoshop project. The part of the image that should be invisible, is not.
View 5 Replies View Relatedlast couple of documents I've been working on,I've been needing horizontal and vertical guides (no problem) but why is it when i close the file (saved all work) when I open the file to continue the guides have to be redone. Isn't there a save guides option in CS6
View 4 Replies View RelatedIs there any way to paste guides, or, putting it another way, can I take an image, add guides, erase the image, keep the guides and paste in another image? Everytime I paste in another image I lose the guides. I want to know where I am in the second.
View 8 Replies View RelatedI have just become aware of the smart guides in CS4. They seem to show up momentarilyin vicinity of certain points e.g. the center of page or the pupil of human eye.I have found very little about them in the help section -
View 4 Replies View RelatedWhen adding a guide in CS2, it would usefully snap to the centre of the current layer. Sadly, cannot make this happen in CS3 except for text layers.
View 18 Replies View Relatedis there any way to create multiple guides in an image by giving the space in pixels or inches as I have to put hundreds of guides in some images and I dont want to do the standard drag and drop procedure of making guides because its more time consuming and also I have the exact pixels location where I need to put those guides in different images ( I dont want to record actions either because images are different),
View 1 Replies View RelatedA desinger gave me files with guides. I can turn them off while in PS, but can't figure out how to get rid of them permanently.
View 3 Replies View RelatedI do not understand why adobe has eliminated any dragable guides in Elements 5.0.
View 1 Replies View RelatedIt would be very handy in determining movement between frames..
View 6 Replies View RelatedI've placed about a dozen guide lines on a blank document but now need to actually "see" those guidelines in the actual print for cutting purposes. is there a way to "convert" them from invisible to visible?
View 6 Replies View Relatedis there some kind of guide to make signatures with ps?
like what brushes and what things do you use to make them? or is it random?
Is there some way to make new images based on the guides? I have a file I need to cut into smaller ones, and I've put guides to block everything off -- but guides seem mostly cosmetic / snap to grid, and less useful otherwise.
View 1 Replies View RelatedI would like to have my cursor snap TO guides at time but cannot find a way to make this happen. Is this an option in PS cs2?
View 2 Replies View Relatedi have recently switched to ps 7 and i find myself wanting to go back to my 5.5
what is wrong with the guides in there? when using the snap to guide, and i select something within the guides, the stupid selection sometimes falls short or too big by 1 pixel. this renders the whole purpose of the guides useless.
i also find that its much harder to set the guides to match up. i set them, sometimes even zoomed in at 200-300% and when i zoom in more 1600% i find the guide not quite where its supose to be.
i didnt have any of these problems with my previous version. i looked around in the options and couldnt figure anything to make it better.
The one with the glasses and lank hair, sitting at the back with no mates!
Now have CS3, and cant get the selection to snap!
When using the MARQUEE it positions the selection 2 pixels up and 1 pixel to the left of the guide (on the outside).
The guides will snap to the selection, however.
Sometimes when GUIDES are LOCKED the selection will snap to a guide, but not always.
Also, in the old days the curser would turn red when on a guide when lined up corrctly. This doesn't seem to happen now.
And in the mists of time do I remember correctly that there was a setting in which you could choose the snap distance?
I did a mockup in Photoshop for a design that needs to go to press in a couple of days. It's complete with guide marks...
Now, I realize that it needs to be slightly smaller than I originally laid it out to be.
I can free-transform it down to the right size... but, my guides don't come with it. They stay the same. Is there a way to get the guides to shrink along with everything else?
To make guidelines that lead to vanishing points, I make a 1 pixel line and rotate it until it is aligned, though at times this process becomes cumbersome. Is there an easier way to create guide lines to vanishing points?
View 1 Replies View RelatedI don't use smart guides, don't want em don't need em. Don't even know why they originally came on, but can't get them off, no matter how many times un check them.
View 8 Replies View RelatedI'm working on a 960 grid layout, with all the vertical guides showing the grid.
I want to increase my canvas width from 960 to 1200, keeping the artwork centred, so in the canvas size dialog box I select the center anchor. Unfortunately this keeps the artwork centred but the guides always move left, as if they're anchored to the left of the canvas. This means the guides are no longer in position.
Is there any way to add more canvas to both sides while keeping the guides where they are relative to the artwork?