Photoshop :: Water Damaged Photos
May 4, 2006Are there techniques available for repairing water damaged photos?
View 9 RepliesAre there techniques available for repairing water damaged photos?
View 9 Repliescaused by a flood in my location (Bavaria/Germany), I have many damaged photos, which where stored in cellar, which was flooded. The photos are dirty and wet, but they can be cleaned and dehumidified. Many photos have now areas with ruined colors and "fire blizzards" on it. can I prepare damaged photos with Photoshop elements (8, 9 or 11) in that way, that I get back a good picture?
View 5 Replies View Relatedhow to restore damaged photos and one of the most essential tools I need is the healing brush tool BUT it wont work!
I create a new layer by dragging the background image down to the icon in the bottom left hand corner.Then select the healing brush tool, set it to replace, proximity match, opacity to 30%, hardness to 100%, flow to 100% and have aligned ticked.
Because of the disability I used a track ball mouse with a sticky mouse button. So I start to paint with the healing brush, have it clicked down but nothing really happens? The spot healing tool works o.k.ish as does the clone stamp.
I"m running CS4 Extended on a Mac......
how to fix the color on this photo. I have several more like it. They are scanned from photos that were developed from damaged film. On the photos where the entire image is yellowed I have no problem correcting the color, but I'm not quite sure how to make a selection on photos like these and then match the color to the other half..I am using cs5.
View 9 Replies View RelatedI have a pic that has a really pretty view of a bridge over a little stream. Only problem is the water is covered with slimy green algee.
View 5 Replies View Relatedany tutorial to transform a brush of water, in "water authentic"? Color, brightness, etc .........
View 4 Replies View RelatedI want to make a fountain that has water jets that cause ripples when they hit the water. I have tried the basic reactor water and Pflow setup, as well as super spray, but neither seem to work. Is there any way to accomplish this without "faking" it by doing something creative with the water's texture?
View 9 Replies View RelatedI have some photos of my wife in a dress that came out pretty nicely. The only issue is on the day we took the photos it had just rained and the bottom edge of the dress got wet.
I want to know if it is possible to use gimp to remove the water / wetness from the dress so that the photos look like the whole dress is dry.
Edit:
Attached Photo of the dress.
Attached File(s) IC-712.jpg (438.88K)
Number of downloads: 12
My PS CS3 CD has become damaged. Where can I download another copy?
View 1 Replies View RelatedI have CS5 for Mac and my disc was damaged. Adobe no longer has it for download or a replacement disc. This happened to me with CS3 and I paid to upgrade to CS5, now they want me to do it again
View 6 Replies View RelatedI have a Very old B/W photo that is torn/creased/stained/yellowed/etc. Just as a challenge, I thought I would try to do some repair on this photo.
Some parts of the image are incomplete/Gone. One example would be a person's face. The picture was torn in half across this person's face. The tear goes horizontally across the nose. At the tear, some of the image is gone and it is just white paper. I have had a great deal of success rebuilding this face but I have several others that are of the same condition. Code:
I've been searching for a damaged wall effect that I can create in photoshop. I'd like it to be an indoor wall, as if it's got plaster falling off and has been damaged by water... that sort of thing!
I'm trying to make a picture that looks like it is a wall inside a house that has been damaged in some way or other.
I'm looking to make something kinda like this, but I really have no idea how it was done. The whole image has a damaged look to it, and looks a little scratched up. Also I would like to know how to create the creases that appear to be in the paper.
View 9 Replies View RelatedI am not the most technically savvy lady so I might have made this issue worse.
After I first installed the Creative Cloud and downloaded Photoshop, I attempted to open the program and it said "file is incomplete or damaged".
I tried deleting it out of the applications in the side folder to re-install thinking it would get rid of it but the tab is still there.How do I delete Photoshop to re-install? Is that possible?
I am working on restoring an image damaged by flooding. All the surface damage appears to be in the blue channel. I know there is a way to replace the blue channel but can find no decent explanations on how to do it. I am working in PS CC.
View 3 Replies View Relatedi want to know if there is a way possible to write text in damaged building effect.
i dont have any pictures but i can explain for example if we write E, the top bar is damaged from the end and the middle one has broken windows or something like that
is this effect at all possible,
The hard drive on my laptop is performing erratically and CHKDSK can't fix it, so it's time for a new drive. In preparation for the new drive, I tried to transfer activation of Photoshop CS2. I get the following error dialogue box message:
"The application or DLL C:Program FilesAdobeAdobe Photoshop CS2Activationen_USalmuirsc.dll is not a valid Windows image. Please check this against your installation diskette."
The only choice for this box is to click the OK button. When I do, I get the following message:
"Sorry, a serious error has been detected. To continue using Adobe Photoshop, please reinstall the appliation."
I'm getting this error when opening two specific PSD files in Photoshop CS3 on Windows XP Pro:
"This document has been damaged by a disk error..."
I've been testing hard drives and memory, as well as looking at other files, and as of now I think it's not a systematic problem; rather, I suspect that these two files were damaged when migrating from my old computer.
I have two questions for anyone out there who has troubleshot this issue before:
1. One of the files has a violent green stripe 50-100 pixels wide in Photoshop, but when opened in Gimp it looks fine except for two individual pixels that are pure green. The other has a blue stripe across it in Photoshop, but looks fine in Gimp. (I am comparing specifically the background, without any layers.) Why would the Photoshop and Gimp views of the same image differ so widely?
2. Does anyone know of a script that can check all files for this error? Sitting there opening all of my thousands of PSDs one at a time seems like a royal pain, and something that could be automated by someone who knows how...
I'm looking to create this damaged metal effect in CS2.
how to do so?
I found a tut, but it was for Gimp. Also, I'd like to try to make it without any lighting or shadowing effects. I'm importing the texture into a community built game, and I know how to create my own specular & bump maps for the in-game shadow effects.
I have Photoshop Elements 6.0. I was working on an image with 3 layers and I'd been saving very regularly, then my computer crashed. It didn't crash while I was saving but it must have still been saving when it happened because my file got damaged. Now when I open it, it comes up with a message saying 'This document contains Adobe Photoshop data which appears to be damaged. Continue and ignore the Photoshop data?' when I click ok it then says 'The embedded ICC profile cannot be used because the ICC profile descrition is invalid. Ignoring the profile'. When the image opens its completely flat and black. I've tries a few recovery programmes but that didn't seem to work. I found a temp file but I don't think it'ss a real temp file because it doesn't have an extension.
View 4 Replies View RelatedPhotoshop Elements 12 for Mac
Late 2012 Mac mini, 2.6GHz i7, 16 HB RAM, Mac OS X 10.9 (Mavericks)
I purchased and downloaded Photoshop Elements 12 as an upgrade to Photoshop Elements 10. Download and installation appeared to be completely normal but when I launch the Photo Editor the following message appears:
Your application install seems to be damaged, Please reinstall the application.I have:
Reinstalled PE12 from the original downloadDeleted PE`10 and reinstalled PE12 from the original downloadRedownloaded PE12 and resinstalled it from the new downloadUninstalled PE12 and reinstalled it from the second downloadManually scrubbed every trace of PE12 and reinstalled it from a third download.I am still getting the warning message. From what I can tell from cursory testing the Photo Editor appears to be functioning correctly other than the damaged installation warning message.
Some of you may have seen my thread in the Show-Board section about a damaged photo I have restored. On the photo there is a lady sitting to the left with a cream/white t-shirt on, I have been asked to try and restore that bit too rather than do what I have done in the resto.
This is all I have to go on:
Here is the original image:
and my Restoration so far:
They want the t-shirt as well but there is nothing to go on apart from some apparent squiggles, as you can see.
how I can extract it, I can't even make out what it says or else I would try and find the t-shirt and put it in.
I have a student with images that wont open. A warning appears that Adobe Photoshop data appears to be damaged. Unexpected end of profile.
View 1 Replies View Relatedwhile jpg file open in photoshop, its show error message "This document contains Adobe photoshop data which appears to be damaged. Continue and ignore the photoshop data?" i click ok, then only its open, why its show error message
View 3 Replies View RelatedThis problem began for me after installing the PSCS6 beta. I started getting a popup saying "Adobe Application Manager is missing or damaged" and advising me to download and reinstall AAM. I did that, with no result. The responses from Adobe ("you must have a bad installer"). I was able to leave the beta as it was and use PSCS5.
Fast forward: PSCS6 is released and I purchase and try to install the upgrade, which won't install with the beta present. The Beta uninstaller won't run because of the AAM error. I laboriously search and delete all files related to the beta.PSCS6 release version installs, but when it starts I get a popup witht the same message about AAM. I have spent over 12 hours in chat with Adobe support with only negative results. Not only have they not fixed the problem -- they have managed to propagate it to my PSCS5 installation -- which they subsequently deleted.
As part of attempting to diagnose I have tried the PSCS6 unistaller, which fails with the same error; used the CS cleaner tool and reinstalled -- same problem; verified permissions and file ssytem on my system drive; tried removing CS6 and reinstalling from a new, clean admin account -- same AAM error.
I am at my wits' end with this. I have NO working verion of photoshop (big problem for a photographer/designer), NO confidence in Adobe support (most of the 12 hours was watching them try the same things we had done several times before), and how to fix this short of stripping my Mac back to the metal and reinstalling everything.
Download not working. Shows files damaged or I should covert original to pdf. Where is original? When I try even that does not work. Download is picking location. Not allowing me to pick location of download.
View 1 Replies View RelatedCS6 illustrator and photoshop not allowing me to open documents due to different reasons...damaged files, badly formatted, not compatible etc. However, these files were all created on the same computer and program therefore should be compatible. Is there a way for me to fix these files/prevent this from happening in the future?
View 1 Replies View RelatedI downloaded the free trial of the VideoStudio Pro X4 a month ago and was so impressed that I went out and bought it! Then, after downloading SP!, it encountered a problem and stopped working. It was just a matter of restarting the application but it happened more and more over the weekend, meaning I lost work which I hadn’t saved. So I decided to uninstall the free trial version and install from the disk and it worked fine for a while but I then got a problem with my security program. Not sure whether it was due to the Corel installation or just coincidence.I did a system restore to fix the problem with the security program and since then I have been unable to access VideoStudio and get the message: Error 4: Corel VideoStudio files have been damaged or modified. Please reinstall your original source. But when I try I get the message: “Setup.xml could not be loaded. This may indicate that the file is corrupt”.
View 4 Replies View RelatedHave about 25 old pics, shot back in early 60's that I ned to restore. Find it strange that there is not a tutoral for this in GIMP.
View 7 Replies View RelatedWhy do my .JPG files "appear to be unsupported or damaged" in LR 4? I've never had this isssue before, just (attempting) to import files from my snycomatic folder (taken with my iphone). I've been doing it exactly the same as usual, but this time when I attempt it I get "the files appear to be unsupported or damaged."
All are jpeg files, all open in finder just fine, and it did allow 8 of the 30 some odd pictures to be imported? preview image(s) were unavailable in the thumbnails, though the ones that worked were visable.
I did double check and the folder permissions are all fine and I seem to be able to import other files from other folders with no issues.Running Lightroom 4.4 & OSX10.7.5 on a Mbpro.
I can drag these same pictures to Lightroom and work on them but I can't import them for catalog. They preview in any viewer but I can't import for catalog.
View 3 Replies View Related