In previous versions of Photoshop if you had a selection you could hit the delete key and the selection would be filled with transparency. When I do that in PS CS6 it brings up the fill dialogue box and I don't see any transparency fill options. How to do this in CS6?
View 2 Replies
I have a graphic in Photoshop that I am trying to save as a TIFF or JPEG, so that it can be used in Pagemaker. However, when I place the image in a Pagemaker document, I get this white box around the boundaries of the image. Is saving as a GIF the only way?
View 1 Replies View Relatedfor example creating a fill using Edit > Fill with a random Color and Opacity in the Fill dialog, then later without the original information about the Color and Opacity but just the file, how can I make exact same fill and opacity again?
View 5 Replies View RelatedI am using a layer mask to hide/all on a another gradient/pattern. I can use the gradient tools and preset okay to achieve an effect of it blending out horizontal or spherically etc.. (depending on which preset) is set. However I want to blend on my path which is custom made.
View 1 Replies View RelatedI have a template for name tags for an upcoming event. I am trying to input a series of pictures into them,. TIFF files if that matters, add the multiply channel, then fill up the page.
Once the 8 per sheet are filled up, to save, and fill up a second sheet, then continue until finished.
Is this possible in photoshop, if so how?
as an alternative to using the magic wand to remove a color to transparency (which leaves fine detail, say in a line drawing, in a very sorry state) i saw someone use the multiply function in layer options to remove all white from a greyscale image leaving black lines over transparency. neat,
View 2 Replies View RelatedWhen I open some raw files I have the fill light option in camera raw and sometime I don't. Why is that? See my two different images.
View 4 Replies View RelatedI have found how to edit my file info inside Ps, I have created an average file info, my name, my website, and other contact info, and i want to add these information to all of my future works description.
In this picture, there is an auto completion option, what does this mean? I want to these informations will be applyed automaticly whithout my intervention.
Why do I not get the option to "fade fill" when I use the ALT/Backspace keyboard shortcut to fill a layer. If I use the menu option Edit/Fill.. to perform the fill I am given the option to "fade fill"
View 10 Replies View RelatedCant find Content Aware Fill option in Photoshop12 which I am using for first time.
I click on EDIT then FILL.
However in the Contents drop down menu there is no option for Content Aware. Have tried Google with no joy.
Implement the option to change the transparency grid colors, even if it's only a simple toggle between dark/light grids. It would work when drawing light objects.
View 2 Replies View RelatedI am unable to solve my problem with exporting an object (curve) with 2-colors fill (with transparency) to WMF, PNG or AI. I spent quite a long time already to figure out how to make transparent fill and when I finally succeeded, I cannot export that and work with it
I would like to transform the curve with transparent fill to just curves somehow... than it should be no problem with exporting. Or transform it to some other vector object - it does not matter - just to be able to use it and export it as vector object.
Which type of the blending mode is supported by layers that use the Fill With Neutral Color option?
A. Normal
B. Dissolve
C. Luminosity
D. None of the above
providing a fantastic resource for all ACAD users, of all abilities.
I would like to know if it is possible to turn a solid fill area into a transparent appearance.
This is in a 2D drawing.
Is there a button/option which enables the drawing to fill the screen
View 3 Replies View RelatedI am a newbie to Xara and I have Xara web designer 7 premium.I watched the video tutorial which is very useful, but when I tried to use some of the video lessons I could not find a "Panel Fill" option in the color editor, how I can access it ??
View 2 Replies View RelatedWhere else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
Where can I find feather option and smooth/refine edges option in Adobe Element 7.
View 1 Replies View RelatedAs you might see in layer panel. there is a blending option applying on text. and when i try to applying new blending option i-e drop shadow or inner shadow to layer shape 5. it will mess with also to text layer.
View 6 Replies View RelatedHow do I get it so that when I draw a shape it will fill with color? In my options bar there is a rectangle with color where I can choose that, but sometimes that's not up. How do I pull it up?
How do I fill a canvas with color without having to cover it with a large rectangle to fill? I've gotten answers to this but none has solved the problem.
I have two pictures.
I would like the two pictures to blend in the middle from left to right.
The picture on the left will be sharpe on the left side but fade/transparent by the time it reaches the middle.
The picture on the right will be sharpe on the right side but fade/transparent in the middle.
I would think I need a gradient transparency (you always have to use a color)
I see pictures like this all the time, but can not seem to find the correct feature or combinations of features.
When I use the fill tool to simply 'fill' a selection, it does not completely fill it. There is an ivisible barrier or line that prevents it from filling all the way to the edge. Do you think I have my settings wrong?
View 2 Replies View RelatedI cannot stand it when I make a new layer in Illustrator and the color hint becomes yellow. This usually happens on the third new layer into every project. I can go in and manually change it from yellow to the ten plus other colors, but I just want yellow completely out of the list. It's awful to look at, and I think every other color is easier.
View 5 Replies View RelatedOkay, so it's been a while since I've done one of these, and I haven't done one on 2014 at all yet.
I've got a fairly simple part, it's about 6" long x 3" wide, less than 3/8" thick, without a whole lot of complex geometry to work with. I've built up my whole mold for it, and that went okay, but the fill analysis seems like it's taking forever. Like hours. It gets to the "Fill" stage, gets just a sliver of green on the progress bar, and then sits.
Last time I tried this was on my workstation at the office, using 2013. It didn't take nearly this long, and the part was much larger and far more complex, with a significantly slower computer.
Is something broken with this in 2014? I guess I can just let it run overnight, see what happens in the morning ...
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
see xcf attachment...
I used a heart fill pattern of the right 75% of the picture and the left 75% of the picture is selected overlapping the first fill in the background... I want to fill the selected background area with a flame fill pattern where it overlaps the selected portion of the heart pattern as well as the transparent area... 'overlay' looks better but Gimp is FAILING to fill the transparent areas, it ONLY fills the overlapped heart pattern portion of the selected content!!! I even tried filling the transparent area with 'white' then filling the selected area, but it STILL ONLY wants to overlay fill the heart pattern, it STILL leaves the rest alone!!! it doesn't matter if the background is white or transparent, it leaves that alone and ONLY fills the heart pattern area of selected portion of the image!!!
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
I just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
View 3 Replies View RelatedI spend 12 hours a day in illustrator and some functionality seems to simplistic and ultimately annoying.I'm using Windows 7 64bit. Adobe Illustrator CS6
1. Please auto switch between Stroke fill and fill when I select text. 99% of my time is spent only using fill on text. I would rather manually switch to Stroke when I want to add a fill to it rather having to switch to fill each time.
2. Same for Stroke, from point 1.
3. Add an auto layer for Guides. When I am using the Scissors tool, the majority of the time I don't want to cut my guides up, I would rather instead cut up the shape below it. Again manually changing the layer to select the guide would be preferable.
4. I personally never use the Eraser tool and I switch to the Scissors Tool. Without fail every time I launch Illustrator I have to switch from the Eraser Tool too the Scissors tool. Please add cookies or something so I don't have to always switch to the Scissors Tool.
5. Move "Align to Pixel" toggle somewhere outside a file menu.
Im making some little buttons with filled backgrounds. Below is an example. Is it possible to adjust the resolution of the fill, lets say smaller, to make it look more crisp on the button?
[URL]
The above looks nice, but the one below, this is suppose to be snow but the resolution is so large you cannot tell what it is.
[URL]
