I am attempting to recover text behind black marker...
The text itself is black (written in marker), and is overlapped with a blob of black marker (again with the same marker in black).
How would I go about recovering this?
My attempts in Photoshop gave me very distorted words that were not readable.
Autocad Architecture 2012 crashed during hatch. Upon recovery, all my text was replaced with boxes. I suspect there is a system variable which was changed as part of the recovery process, but I can't find it.
View 2 Replies View RelatedI need to recover a B&W, fairly high-res image made up of only black and white pixels (a halftone, but individual pixels, not circular patterns for printing). The goal is to make it look more or less like a regular greyscale, so it loses that grainy look when printed. The detail is there, it's just muddled by this.
The best solution I've found so far is a gaussian blur to mix everything together. Sadly, this leaves everything rather noisy. Is there a better way than just blue + noise removal + unsharp mask? Or is this the standard prescription for such an image.
I'm testing out Photoshop CS6 to see if there's much a difference between CS5, and i'm noticing that there's no Recovery mode in Camera RAW for my file, they seemed to have changed Camera RAW a lot.
Is there no Recovery setting anymore? I have been using this since CameraRAW essentials, which Adobe ended up purchasing so i had to use Camera RAW.
How do I get the recovery slider to show up in ACR? When I open an image there is no recovery slider under my exposure slider. When I open images previously edited in Photoshop Elements the slider appears in CS6 ACR. I want it there all the time as default.
View 2 Replies View RelatedIs there anyway to recover a PSD file in CS5.1, once it's been saved in another format and resized?
View 2 Replies View Relatedi went to maximize a youtube video which coincidentally crashed my computer while my photoshop file was saving
View 6 Replies View RelatedI'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 Replies View RelatedAfter a system recovery on my HP, the Photoshop Elements 6 program will not reinstall. All other programs are up and running. The install from the disk appears to be successful, but I don't get the window to enter the serial number. When I click on the icon, nothing happens. Uninstall and reinstall results in same situation. I have Windows Vista 2007. Adobe gave it a case #184059543, but will not support it due to it being an "old" program.
View 1 Replies View RelatedI have read several forums about how to disable the auto-recovery feature. However, I don't want to disable the auto-recovery because I like that it saves my work in case of crash.
It's just annoying that every time I open Photoshop all those previous files auto open. Is there anyway to make it stop? I read that there is a file that you delete, but will that stop the auto-recovery feature?
I have the most recent version of elements, version 11. The camera raw plug-in is up to date, some 7.4 something. On the online help list and tutorials I have seen, there is a recovery slider. Yet, when I tried to practice with raw files in camera raw, the recovery slider was not there. I tried looking around the window, clicking menus, but can't find it.
View 2 Replies View RelatedCannot find explanations as for most recovery seems to work fine regardless of where the scratch drive is set. For me it only seems to work if the scratch is set as boot drive, C:.
I became aware of this after recently adding an SSD to my system and accordingly setting the scratch disk to one of the other larger drives. After a photoshop crash there was no recovery - surprising as it had worked flawlessly in the past. I did a test, switching the scratch location among a few drives and seeing where the recovery files were written - the answer was C: drive. In any other location the PSAutoRecover folder was created, but no files ever appear there.
My understanding of Auto Recover is that when a working file is saved and closed, the corresponding Auto Recover psb should be trashed automatically.
Every evening I save and close all my work, quit Photoshop and shut down the Mac. Every morning when I start Photoshop, at least one Auto Recovery file opens. It's the last file(s) I was working on the previous evening.
I've toggled Auto Recover on/off, trashed the folder and had CS6 recreate it. Nothing works. Every morning, I am presented with a psb of the previous evening's work.
My scratch disk is a dedicated 100gb SSD. I have triple verified that CS6 is not writing recovery files to a different location.
License Recovery will not load or open after downloading it. What do I need to do to get CS 4 to work
View 1 Replies View RelatedMy Photoshop crashed in the middle of saving. There's now a tmp file in its place. I tried opening it with Photoshop but it got an error. Is there any recovery program for getting back corrupted save files?
View 5 Replies View RelatedWhenever he starts Photoshop up, all of his auto recovery files open. For example - when he goes to open a psd of a web design, he will get about 25 files opening with the title "JobName recovered".
I had a meander around the forums looking for possible fixes and information about the Auto Recovery feature, but so far have not been able to cure this ailment.
I have previously disabled the Auto Recovery feature as well as deleting the auto recovery files, yet this was only had a band-aid to amuptation effect. The auto recovery files have reappeared and are now opening again upon start up.
I accidentally deleted some photos from a memory card. I recovered them using software called "Recover My Files". This software recovered the files but now I can't open them in CS3. I took these with an old Canon Rebel DSLR and they should not need converting, they opened fine before I deleted them.
View 2 Replies View RelatedAfter a time machine recovery most of my photoshop documents recovered fine, however there are a select few (and my most recent work unfortuantely) that seem corrupt. It isn't all of my documents. Trying to recover them again from back-up doesn't seem to be working. I did have to reinstall photoshop CS4 after the recovery.
I've tried opening with other programs, I've tried changing the file extentions etc. If the files were just corrupt recovering them from time machine should fix the problem.
Like Recovery Assistant, Crossover, Face Time, and some others. So watch out.
View 3 Replies View RelatedI have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
Any ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View RelatedUsing Elements 9 I was adding black text to a .jpg image. Somehow during the process, the text being entered defaulted to a "wavy, illegible set of characters". Spent 30+ minutes looking at FAQs and have given up. I want to reset to default simple clear black characters. Closing and restarting Elements does not resolve this issue. When ending a newly entered set of text - still get "wavy, illegible set of characters!"
View 6 Replies View RelatedI am setting a book in Indesign CS2.I use "Text frame options" > align > justify on all my pages. On a page that was so justified, I inserted a picture using the "text wrap". Soon as I did, the text stopped being aligned along the foot of the page (which looks rotten, because the facing page is justified and so the spread is now no longer aligned.
I tried to I use "Text frame options" > align > justify again, but now the option to align is now greyed out.
This Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies View RelatedHad a crash eariler today and saved the A.R.M. file through the dialog box. Where again does it save to or what file type is it? I've searched the Corel Program folder but don't see it, isn't it in the user folder or some temp folder for CorelDraw?
View 2 Replies View RelatedI was subject to a 10 minute power outage and lost the computer. when power returned, I tried to recover my corelDraw X4 file. No Luck. Inspite of the "backup" being scheduled every 5 minutes. the one backup file was 1 hour old. The documentation said that the CorelDraw system stored a recovery file elsewhere and that I should go to the "File Recovery Dialog Box and "Click" the recovery file. Where is this "File Recovery Dialog Box" ?
View 11 Replies View Related After a Motherboard failure and partial HD failure I'm attempting to rebuild and replace lost software.
I had originally loaded the boxed version of Video Studio 11 Plus and later did an upgrade to Video Studio Pro X2 via a download from Corel...previous system was XP.
From what I've read it appears that I will need to: Reload the Boxed version of VS 11Plus, and then download the upgrade version of VS Pro X2 from Corel's website. I can view my serial number of the VS Pro X2 on Corel's website from when it was registered. The new OS on this computer is Windows 7 64Bit. Does this seem feasible, or is there perhaps a better way.
Also it appears some of my VS Database files are still recoverable from the old HD. Should I be able to import them into the new?
when I open my revit file, I got the following information.
once I close the up diagram, revit diliver the next message.
So my time has come and I have just been bitten by the Illegal Operand failure upon opening a document. The doc was created in AiCS3 but I'm trying to follow the recovery procedure in AiCS6, described here: URL>....The problem is that at step 3 when I'm holding down the three keys, and hitting Open, Windows 7 is triggering the country suffix behavior and appends the country code to the selected file name, in my case - .pl. This makes my file selection invalid (myfile.ai.pl). I guess this comes from a web browser (I have almost all of them installed).
What lead the file to corruption was the spiral tool. WHen I drew the shape, all of a sudden the entire pasteboard (usually filled with dense, tiny checkerboard pattern) got filled with the stroke or fill color. I saved the file and that was it.
I just upgraded to lightroom 4.1 and the highlight and shadow recovery sliders have disappeared. It now looks like me old version 2. What happened to the new sliders?
View 3 Replies View RelatedI was editing an image in LR 5,when the basic panel disappeared. I attempted using the common key, right clicking, but the "basic" never came up.
View 3 Replies View Related
