I can't figure this out... and tried to utilize the SEARCH feature of this site... but couldnt get the best results for what i'm trying to achieve.
I'm trying to type on a circle path-- but I want the text to be typed on the INSIDE of the circle, not the outside.
Let me see if i could clarify without making it more complicated :
Normally, (i'm using cs2) I would draw the circle path and move the text cursor over the shape until it reveals that "wiggly" line. Okay- so i understand that. When I start typing, the text "STANDS" on the drawn path. How do I have the text "HANG" from the path? (much like how a pendant would "hang" off of a necklace)
Is there any possible way, other than drawing out a straight line (with the pentool) and manipulating it to bend (like the letter "U")?
I'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
I'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
Why the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
I am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.
Recently i came to know about LISP called INCREMENT it is so useful. But i have small problem with that It Increments only in X or Y direction or according to UCS. I am looking for a command which can increment along path. In my drawigns many numbers they are in a order by room wise, i have drawn a path on numbers so number should sort as per path direction..i have tried with ALTEXT LISP but iam not getting it is not corting my numbers along path.]
I have been trying to put text along a path as found in this article
[URL].........
However my tool bar looks like this when my ellipse is selected. The one in the Tutorial show one like this. What am I not doing to enable my option menu to show these tools?
I can create text on a path in Indesign easily enough but keep running into the same problem in Photoshop CS4.
I create a curved path with the pen tool but when I click on it with the type tool a little circle is created on the path that stops me typing fully along the path - i can only type up to the circle.
I've hi-lighted the circle in this screen grab.
I'd like to type "text on a path" but the circle prevents me typing anymore words once the letters "text" have reached the circle and an x appears in the circle.
I keep getting this problem on any curved paths I make.
I would like to have text follow the path of a line without showing the line i.e. "FACE TO FACE" following a horizontal "S" curve or possibly a pentagon
How do I create the line and then attach the text to the line and make the line invisable?
want some text along a circular path and the result of "text to path" is ALWAYS text is truncated at the 19th character.GIMP 2.8.2 on Ubuntu 12.11
Process1. create a new background 2. make a circular selection 3. issue "select / to path" command 4. issue "select / none" command 5. create my text, 35 characters long on one line6. issue "text / along path" command
The text ALWAYS starts at the 12 o'clock position and is ALWAYS cut off at the 19th character! On the original circle the text cuts off at the 4 o'clock position.If I make the circle larger the text is still cut off at the 19th character but: - It starts at 12 o'clock and is cut off at 2 o'clock
If I make the circle smaller the text is still cut off at the 19th character but: - It starts at 12 o'clock and is cut off at 6 o'clock..All the circles are large enough for all the text to print around their circumference.
All I did was use the ellipse tool to make the selection, turn the selection into a work path, then select the text tool and click on the path to make the text path, but it goes like this.
I understand how to make text wrap around a circle by using the path tool. But is there any way to make the text wrap around it in a sunburst shape? So that each returned line ends or begins at the path? Here's an image to describe my question.
i have a very rookie problem on cs5. i just started learning about paths and how to write text to follow these paths. from what i undestand in order to have the text follow the path i have to select the text tool and when i hover on the path it should give me the dotted cursor with the squiggly line.
however the problem im having is that the cursor never changes and as a result i just end up being able to put horizontal text that doesnt follow the path. Is there some option i must turn on or something? Im using CS5 at the moment.
All i want is the text to go around the underside of the circle, the right way up, but it won't do it! Using the pen tool to create the curved line is equally annoying, as it seems to cut of the text mid-way through the line,
I've been searching everywhere for a way to create a paragraph follow a path with a justified last left alignment. Is this possible? Basically the technique I'm trying to achieve is to have a text paragraph say in the shape of a silhouette of a tree. For simplicity sake, look at the image below and you'll get the idea.
I want to create a path using the circle tool, then put 3 words text around the path, one along the top, and two along the bottom. But I want the text on top going clockwise, and the text on bottom going counter-clockwise, so it isn't upside down and backwards. I put the text on top, and for a moment I had the text tool reversed on bottom, but I lost it and can't get it to work again. I think I used the command key while placing the text.
how to reverse the direction of text along a path around a circle?
I created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it? 2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
i just would like to write inside a hollow selection (or path).to make the issue unambiguous in order to eliminate useless answers, enclosed more details.
i make a square selection using the marquee tool, then i subtract from the selection a small square within the first selection (i.e., the small square does not intersect the edges of the bigger square). this gives me a square doughnut.from the selection i make a new path. using the text tool, i would like to write (have text) within the selected area (i.e. on the doughnut itself).
apparently, it is applicable to write within a long a path, or within a (not hollow) polygon.
