Photoshop :: Spectra View II - Multiple Calibration Profiles
Oct 14, 2011
I've got a nifty monitor that comes uses Spectraview II and the NEC calibration puck -- It is terrific, I calibrated the monitor for print and it gave me very close print emulation on my monitor.
However I do work both for print and for the internet (ads, banners, etc.) When I create a banner in Photoshop and then optimize it for the web, the resulting jpeg is often quite different in color from the psd file.
To solve this problem I recalibrated the monitor for rgb. However, that overwrote the print calibration profile, the NEC software did not give me the option to save it in addition to the print profile. I do not want to go through the entire calibration process every time I switch from working for print to internet.
If it is possible to save multiple calibration profiles that I can switch in system preferences?
View 2 Replies
ADVERTISEMENT
Mar 26, 2012
I'm successfully using the DNG Converter 6.7 RC to get my 5d3 photos into LR4, but it appears the only profile available under Camera Calibration is Adobe Standard. Typically I like to start from Camera Neutral.
View 5 Replies
View Related
Aug 19, 2013
I am using lightroom 5 on a windows 8 pc and can not get any camera calibration profiles to show up. I have 14 profiles for my Sony SLT-A65 in my cameraprofiles folder and a corresponding camera folder with also has these profiles. I have checked all file attributes and the only thing I see differrent from some other camera profiles is the file ownership is adminisrator instead of system. Also Photoshop does not see any camera calibration profiles either. I have done a lightroom installation repair from original disk which didn't fix. I have all my lens profiles which work fine. I have tried renaming profiles from SLT-A65V to SLT-A65 to match what shows up on displayed file information.
View 2 Replies
View Related
Apr 4, 2014
I'm using LR to process DNG files from Leica M 240.
I understand LR has some extra profiles ( "Camera Faithful, Camera Portrait, etc" ) for some Canon and Nikon camera models.
As under "Camera Calibration -> Profile" I can only see "Embedded" or "Adobe Standard", does it mean these extra profiles don't exist for Leica M 240?
View 1 Replies
View Related
Mar 4, 2011
I installed Xrite ColorChecker Passport software and loaded a couple of custom profiles in the develop module under camera calibration. There was a glitch in the software and it did not allow me to name those profiles. Once I uninstalled that version and loaded the newer version the naming process works fine. I would like to be able to delete the unname profile out of Lightroom but I am not seeing how that can be done.
View 13 Replies
View Related
Jun 23, 2013
How do i remove unwanted profiles from the profile menu in camera calibration
View 3 Replies
View Related
Nov 15, 2006
I've recently upgraded from Adobe Photoshop Album 2.0 to Elements 5.0 with integrated album. Here's my problem.
I have three separate user profiles on my XP computer, and I want to share the same catalog among them all. This was no problem with Album 2.0, however in Elements 5.0 I can't make it work. From each user account I've opened the program, selected "Preferences" and pointed it to the same "my catalog" file and photo directory locations, but it only works from the account from which I installed the Elements package.
Elements seems to be fully available and functional from the other user accounts, but selecting "organize" either gives me the metadata without access to the pictures themselves, or tells me the catalog was created with an earlier version of Album and needs to be converted. In the latter condition, if I allow it to convert it tries for a while then returns an error.
View 1 Replies
View Related
Oct 8, 2012
Is there a way to view files in LR with different profiles? I looking to perform the same function I can in PS (view>proof set up>custom>picking my stored profiles to use for viewing). I primarily use LR and prefer not to keep switching back and forth. I have LR 3.6.
View 2 Replies
View Related
May 21, 2012
I use GIMP for a number of purposes, including general image editing, drawing and pixel art.
I'd like to be able to set up profiles for different hotkeys, default windows/window positions/brush settings, etc., but so far as I can find the only way to do this is to either replace/edit the settings files when loading up a different profile or changing its directory settings, neither of which is very convenient, nor am I sure if either is even sufficient.
I'm using Windows XP and GIMP 2.8.
View 3 Replies
View Related
Aug 28, 2012
I am simply xref'ing a profile drawing into a sheet drawing to print out. AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to. It almost looks as if the PL linetype generation is off for this line.
View 1 Replies
View Related
Mar 7, 2013
I have a drawing with 13 profile views. 12 of them are working fine.
One profile view has 'lost' all its profiles. It should have one surface profile, and 6 superimposed profiles that are designed by layout in other profile views.
The profiles still show up in prospector and in the profile view properties, but you can't see them in the drawing. The profile view is on the same style as all the others, and the profiles are on multiple styles, but the same as their source profile and others in the drawing that are working fine.
I edited the alignment a little to see if that would 'jog the memory', then I turned all layers on and thawed. Still nothing. Then I superimposed a couple more profiles to see if they would show up. Again, they show in the properties, but do not plot in profile view.
I have a separate drawing with this alignment & profiles shortcut into it, and I'm seeing exactly the same behaviour there too.
View 8 Replies
View Related
May 18, 2013
I would like to know if it is possible to create more then one shortcut key profile in acad2011.
I need more then one acad.pgp file with different configurations that i can load via express => tools any time I want. Tried to make a copy and name it acad1.pgp, acad2.pgp, etc... but when I start up express tools, cmd editor, the option file => open does not give me the result I was hoping for. Does nothing actually, just allows me to view the shortcut configurations in the particular file. Hope that this explains my predicament
View 9 Replies
View Related
Jul 24, 2012
2012 SP2
I'm having a problem with profile shortcuts showing up under multiple alignments. I have 16-alignments and profiles in their own drawings. I didn't create the shortcuts right away as I was still figuring out how I wanted the project dir structure. When I had that solved, I started creating the shortcuts. When I checked them, some of the alignments had up to 6-profiles from other alignments listed under them. One alignment had 3-profiles, and not one of them was for the alignment.
I removed all the profile shortcuts and started bringing them in again. Same problem. This was after shutting C3D down, cleaning up the tmp files and restarting.
There are shortcuts for 36 other alignments, and none of them appear to be affected, only these last 16. Validate Data Shorcuts doesn't do anything.
View 1 Replies
View Related
Mar 15, 2011
there is a way to delete multiple profiles at the same time?
Currently, I have to go through the prospector and delete them one at a time. I have an alignment with many profiles (various walls along the length of the road), but have split the drawing up into several files... How can I delete all the profiles at once?
View 4 Replies
View Related
Nov 20, 2012
I can't sem to get a Half Section View through extruded Content Center parts such as channels, pipes etc.?
View 5 Replies
View Related
Aug 5, 2013
How can I show two proposed alignments in one plan and profile sheet?
View 3 Replies
View Related
Feb 16, 2009
When using the publish command to print multiple sheets from Civil 3D, it will sometimes fail to print certain objects. Usually it is a profile. Occasionally it drops some of the pipes. When we plot sheets individually it plots fine. Only C3D objects are affected, not regular ACAD objects. It only seems to be pipes and profiles. This problem is sporadic. It may be drawing specific but the sporadic nature of it makes it hard to say for sure.
The way we set up our drawings, profiles and pipes are almost always DREF's. This appears to be related. If we creat a test drawing with everything in one drawing publish works fine. If we then seperate into two drawings, DREF the data, and then publish again, the pipes disappear (from the plot not the drawing itself).
The same problem occurs on two different printers so I don't think it's driver related.
It started happening when we were on 2008. I thought maybe it was just that version. However, it seems to have gotten worse in 2009.
View 8 Replies
View Related
Aug 24, 2010
I have a design file that has and alignment with 3 profiles (one surface profilke and two layout profiles)
All these are data referenced to the project. Then they are data referenced into a new file. I bring in one of the profiles that brings in the alignment. Lets call it "Main Street". Then I create another reference to another one fo the profiles and it brings in a copy of an alignment and calls it "Main Street (1)"
This is a pain because I cant get a profile view to show all the profiles because the profiles are associated with three different alignments "Main Street", "Main Street(1)", "Main Street(1)(1)"
This is only happening with one of the of the alignments. The other alignment has all its profiles listed under one alignment.
View 6 Replies
View Related
Mar 31, 2013
Trying to find ICC Profiles. I am a college student going for my BS in Photography. Our assignment is to take photo paper from three different manufactures and download the ICC Profiles for each of our papers chosen. Let me tell you this is not as easy as it seems! Where I can find the profiles for Adobe PS for different types of photo paper. Each manufacture only gives the ICC profile for their products. No scanned profiles are available.
View 3 Replies
View Related
Nov 14, 2012
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 1 Replies
View Related
Apr 15, 2008
I'm working on a project, and I want to open another file (perhaps to drag it into said project). So I go to the Bridge and I double-click on the file, and it opens up, taking up the whole workspace like it should. HOWEVER, when I click the downsize button (to make it a smaller movable window) it makes it a smaller window in the top left corner, but I can't move it and I can't see my other project that's supposedly behind it. I have to maximize it, and then totally minimize it to see whatever is behind it.
Sometimes something really weird happens (I don't know if it's because I did something different or not). When I click the downsize button, the window totally disappears. No smaller window, no bar at the bottom. I can still see the document in the Navigator, however. To get it back, I usually just quickly create a new document, then exit out of it, and my original project that I was working on is back again.
I would really like to be able to just click that downsize button to have multiple movable smaller windows so I can easily drag stuff from one project to another.
View 1 Replies
View Related
Sep 10, 2013
How do I view multiple images in one window? I want to compare images side by side, not in tabs.
View 3 Replies
View Related
Mar 6, 2014
in photoshop elements 12 i try to select multiple people to view in organize but can only select one person at a time. if I try to select two or more people to see their pictures, I get nothing. I try to use CTL-click, but that does not work
View 6 Replies
View Related
Sep 5, 2012
After selecting the first image, I cannot select the subsequent images I want to include in the the multiple image views available in PSE. How to override the PSE and choose the images I want in the multiple views?
View 4 Replies
View Related
Jun 28, 2006
Is it any different than CRT calibration?
I just don't think my colors are correct.
View 3 Replies
View Related
Feb 24, 2008
I have a lacie electron blue iv 22 crt as a main monitor that runs great and i don't see myself replacing any time soon, cheapo NEC 17" LCD as a secondary and both running off an XFX nvidia geforce 7600gtx. the lacie is running analog output and the nec is running digital.
I get good color from the lacie and on all my prints (oly 330n and kodak 1400 pro, both are dye sub printers). still using adobe gamma from cs2. is this something i need, or should i just stick with what works. (i guess the answer is stick with what works, but do you guys think i would actually GAIN anything by going for this.)
View 5 Replies
View Related
Jun 21, 2012
There is an vast amount of information on this topic, that topic being LCD monitor calibration. Some LCD have presets, theater, games, etc. I want to calibrate my LCD so that if someone else is viewing my work on their monitor and they complain it is too light or to dark, I can say it is your monitor.
One of my LCD has two presets that are of interest 'standard' & 'sRGB' my other LCD doesn't have any presets. What is the best or near best calibration I can manually set both monitors too, if this is even possible on LCD.
View 57 Replies
View Related
May 1, 2013
When we slide the saturation slider for a primary to the left end (completely desaturated position), does it mean that we move this primary to the white point on the chromaticity diagram?
View 2 Replies
View Related
Aug 24, 2006
I was wondering what people were using for a calibration tool for monitors. This is not my profession so I am not looking to spend $500+ on a calibration tool but it seems like there is some fairly good units out there for under $300.
View 2 Replies
View Related
Oct 24, 2005
calibration hardware like Spyder?
View 4 Replies
View Related
Feb 24, 2003
How can I calibrate my monitor so that the photographic images I see on the screen matches what comes out of the printer. Have tried Photoshops monitor calibration. and have tried adjusting the the image's colour to match the print out The photographic images are in CMYK
View 3 Replies
View Related
