I'm successfully using the DNG Converter 6.7 RC to get my 5d3 photos into LR4, but it appears the only profile available under Camera Calibration is Adobe Standard. Typically I like to start from Camera Neutral.
View 5 RepliesI am using lightroom 5 on a windows 8 pc and can not get any camera calibration profiles to show up. I have 14 profiles for my Sony SLT-A65 in my cameraprofiles folder and a corresponding camera folder with also has these profiles. I have checked all file attributes and the only thing I see differrent from some other camera profiles is the file ownership is adminisrator instead of system. Also Photoshop does not see any camera calibration profiles either. I have done a lightroom installation repair from original disk which didn't fix. I have all my lens profiles which work fine. I have tried renaming profiles from SLT-A65V to SLT-A65 to match what shows up on displayed file information.
View 2 Replies View RelatedI'm using LR to process DNG files from Leica M 240.
I understand LR has some extra profiles ( "Camera Faithful, Camera Portrait, etc" ) for some Canon and Nikon camera models.
As under "Camera Calibration -> Profile" I can only see "Embedded" or "Adobe Standard", does it mean these extra profiles don't exist for Leica M 240?
I installed Xrite ColorChecker Passport software and loaded a couple of custom profiles in the develop module under camera calibration. There was a glitch in the software and it did not allow me to name those profiles. Once I uninstalled that version and loaded the newer version the naming process works fine. I would like to be able to delete the unname profile out of Lightroom but I am not seeing how that can be done.
View 13 Replies View RelatedHow do i remove unwanted profiles from the profile menu in camera calibration
View 3 Replies View RelatedI've got a nifty monitor that comes uses Spectraview II and the NEC calibration puck -- It is terrific, I calibrated the monitor for print and it gave me very close print emulation on my monitor.
However I do work both for print and for the internet (ads, banners, etc.) When I create a banner in Photoshop and then optimize it for the web, the resulting jpeg is often quite different in color from the psd file.
To solve this problem I recalibrated the monitor for rgb. However, that overwrote the print calibration profile, the NEC software did not give me the option to save it in addition to the print profile. I do not want to go through the entire calibration process every time I switch from working for print to internet.
If it is possible to save multiple calibration profiles that I can switch in system preferences?
I was saving a picture into JPG format, and I made sure that i converted it to SRGP (that long name thing) but when I put it in dreamweaver, the color profile wasnt working, and the colors of the picture were dull. I was sure that it had an Adobe 1998 profile when I designed it, and I converted it at the end to sRGP IEC61966-2.1, and it still was dull. I used to be able to see color profiles in dreamweaver..
View 4 Replies View Relatedwhy is cmarea calibration darken out in lightroom 4.4? Why can't I change the settings, I have a nikon D5100 camera, the software image come out lighter.
View 1 Replies View RelatedLooking for the Camera Calibration palette in LR 5, its not present.It has probably been missing ever since the upgrade from LR 4. In LR4 I had installed some camera profiles from Huelight. I'm not sure if this is related to the missing palette.
View 2 Replies View RelatedAdjust the color calibration for camera?
View 3 Replies View RelatedI recently calibrated my monitor with Spyder 4 express and the panels turned green. I am using windows 7. I reinstalled Lightroom but panels are still green.
View 11 Replies View RelatedI normally generate a new camera calibration profile by x-rite everythime I change the light settings. This gives rise to a lot of camera calibration profiles in LR5. How to erase them after use?
View 2 Replies View RelatedI use Lightroom for my RAW files and I used to be able to change the profile in camera calibration.. now it is just stuck on matrix?! What do i do to change this?
View 3 Replies View RelatedWe use mandatory roaming profiles for our students and have done for some 14 years with all previous versions of our Autodesk products.
Now Inventor 2014 Pro (running on Windows 7 SP1 x64) will not open with a mandatory profile applied all I get is the new "Send AutoDesk your error box" Remove the mandatory profile and let the user create a local profile from the same default profile used to create the mandatory profile, Inventor works. The only clue I get to what might be happening is in the infocenter.log (within the Appdata section of the profile) where it states that the inventor.xml is not found. Without the mandatory applied the log is clear and the inventor.xml exists in the same folder.
Yes, my monitor is an LCD and it is bright. It is not a proofing monitor. It was calibrated. I've been printing B&W from LR on an Epson printer (r1900 & r2400). I know proper color management. Turn off Epson Color Management, let LR manage color with the correct icc profile
Obviously I can do trial and error, brightening the photo until it looks correct.My thought is, is there a way I could print on one page Thumbnails or like in the film days strips with different "exposures." Then with one print I could pick how much of an adjustment is needed?
I have Lightroom 4.3 and a Canon 6D. I cannot get Lightroom to display my Camera Calibration Profile when I am developing a raw file.
I have dug through the MAC Library and Application Support folder and found CameraRaw. That folder contains my listed cameras. But when I am in Lightroom, I do not see that profile in the Camera Calibration section.
Is there a way to force Lightroom to display my camera profile? Lightroom 2 used to display it.
I wish there were camera calibration presets that matched the in camera jpeg settings for Fuji files like there is for Nikon. (They mimic the classic Fuji films.)
View 3 Replies View RelatedIf i want to get my files offeset printed so they will be done in CMYK...The word "working space" CMYK confuses me a little i thought printer profiles would be "output space" or something
1. Are the CMYK working space options in photoshop actually printer profiles? eg. U.S Web coated (SWOP) v2
2. I ask the guys who do the offset printing what printer profile they use and that is the one i should select in photoshop.
3. So when I soft proof it uses the CMYK working space and my file is previewed or it mimics what i would look like printed on the paper/ink combination at the printers.
4. All the CMYK working spaces available in photoshop are all ICC compliant?
how to change the default settings in Camera Calibration (ALT changes the Reset to Set Default) and from what I can find, any newly imported RAWs will have these defaults applied. how do I apply these defaults to images already imported?
Also, what I specifically want to change is the Profile: Adobe Standard to Profile:Camera Landscape (for example) and apply that to all the images I already have shot with this specific camera body. So, two questions: Does setting the defaults include the Profile or is it only the "Shadows, Primary Red, Green, Blue" that gets saved as a new default and can these changes only be applied to newly imported RAWs?
Downloaded LR4 today and it's not showing the lens correction or camera calibration in develop module.
View 1 Replies View RelatedRunning Lightroom 4.3 on my Mac, I have my D600 set to shoot using "Camera Neutral" profile. However, upon import into LR, for some reason, it changes to "Adobe Standard" profile. I can change it to camera neutral, but it's difficult.
View 1 Replies View RelatedMacosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again. Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11. Start it up again. Guess what first print is a mess again. all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11. Same thing.. first print a mess all others ok.
no problems with PSE10 or PSE9.
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedI have viewed many videos and read much literature to no avail.
View 13 Replies View RelatedI shoot with Canon EFS 55-250 and get the image as a JPG and CR2.
In the RAW file the EF-S 55-250 is recognized and selected the correct profile. In the JPG file, the lens is detected but the lens profile is set to mark = None, model = None. While I can make the change to Canon but still does not choose the lens EFS 55-250. It is missing. The list contains only 14 lenses. For RAW files, the selection includes a lot more Canon lenses.Why the EFS 55-250 exists only for RAW files and not for JPG? Are the profiles different?
Trying to find ICC Profiles. I am a college student going for my BS in Photography. Our assignment is to take photo paper from three different manufactures and download the ICC Profiles for each of our papers chosen. Let me tell you this is not as easy as it seems! Where I can find the profiles for Adobe PS for different types of photo paper. Each manufacture only gives the ICC profile for their products. No scanned profiles are available.
View 3 Replies View RelatedI've a question to *.icc Profiles and Adobe Lightroom 3.5. I saved 10 *icc profiles for different types of printing (for example on acrylglas, different photo papers, on aluminum) which I got from an online printing service. But if I want to select a specific profile for an jpeg export I just got a selection of 6 profiles; 4 profiles are not shown.
View 3 Replies View RelatedAre camera-specific camera profiles intended to match color/hue only, or color plus contrast/value?
View 6 Replies View RelatedDNG profiles created with QPcalibration and Colorchecker Passport are not appearing in the Lightroom profile pulldown menu since I upgraded to Photoshop CC.
View 1 Replies View Related