When I launch Photoshop CC the following error appears: Some of the type layers in this document were rasterized because an error prevented them from being read. Also when I click the text tool, a similar message appears, I am unable to create text. I am using a PC running Windows 8,
View 1 RepliesJust recently started getting the follwing error when opening any file up in Photoshop CS6 Extended. Running Windos 8, 64bit with 16GB of RAM and plenty of free disk space.
"Some of the type layers in this document were rasterized becasue an error prevented them from being read"
I am taking a CS6 Photoshop class, I downloaded the data files from [URL] my task in the book is to click File on the Menu bar, then click Open, then navigate to the drive and folder where you store you Data Files. When I click the corresponding file (PS 1-1.psd), I get the following error message: Cannot complete your request because it's not the right type of document.
View 1 Replies View RelatedWhenever I try to open a file in Photoshop CS 5 extended it says it is not the right kind of document. I've checked the file extensions which are correct. The files themselves are not corrupt as I can open them in other programs..
View 1 Replies View RelatedI've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies View RelatedDid you know that photpshop CS2 has 8 different layer types and you can have up to 8,000 layers.
Also if you have a image with layers, if you press CTRL right click on it, it will give you your layer names. Click on the layer name and hey presto it will pop up ready to work.
I have pse 7. Can I open a pdf document and make a type change? I have a lot of pdf's to work with.
View 4 Replies View RelatedHaving a new problem with X3. Starting today, when I try to add borders to a raster image, I get the following message:
"Command could not be completed because the document type is unsupported"
Same thing happens if it is "Merged Visible"
If the image is flattened or is a background image all works fine. I do not have this problem in X2. I did reset the workspace, as sometimes that works, but not in this instance.
can i write a plug in c#(or any other language) for import/export a screen of the adobe illustrator cs6 in html (or any other format) if document of web type.
View 2 Replies View Relatedwhy isn't it allowed to move a layer from one open document to another one when in the tabbed view? I can't drag&drop the layer on the doc's name in the tab row and have the layer appear in the document?
View 6 Replies View RelatedIn Photoshop (5.5), how to paste all contents of one .psd into another .psd. All that happens is it pastes the contents of the layer I have selected. I already tried checking the link boxes of the non-selected layers, but that didn't seem to work. So...
View 3 Replies View RelatedWe're trying to do a simple thing like using text to filter an image. We've loaded a jpg image, changed it from being background, and try to add a type layer (as instructions said would happen). However, when we type, there is no new layer in the Layer palette, and thus we can't use it as a clipping filter.
I know about how some images don't create type images, but we've even tried creating a type layer with no image background. It just won't create a type layer.
When new two document or open two document,I will get a msg, "The instrction at "0x7c91b1fa" referenced memory at "0x00000010".The menory could not be "written"",then PS close.
View 1 Replies View RelatedI loved an ability in Photoshop 5 to just drug and drop layer onto different doc tab to paste it. But seems like i cant do this anymore in Photoshop 6. Are the copy/paste and arrange docs the only ways to move layers in to a new location in cs6?
View 3 Replies View RelatedIm currently running photoshop CS6 on windows 8 and when I try and open a file the images come up in the layers but not the actual document.
I know this has already been posted about Photoshop CS5 but I think CS6 is slightly different.
How do I get an ID CS4 layered document into PS CS4 with the layers intact for further editing there?
View 4 Replies View RelatedRandomly on both of my computers. It happens on different versions of Photoshop, on WIN XP and WIN 7, so it's quite random. It happens everytime I want to duplicate layers, only when I duplicate them (or group) to new document. What to do about it?
View 1 Replies View RelatedI'm looking for a way to resize all the layers in my document to a specific size. I'd like to resize every layer to be exactly 6 inches in height (while keeping proportions constrained). I can manually transform every layer to do this but I haven't found a way to do this automatically to all layers, I've tried to do it as an action but it's recording it as a percentage and not a fixed height, so it doesn't work on the other layers that aren't the exact same size.
View 12 Replies View RelatedHow do I select a layer inside the document area?
I would have thought that if I click on an object (in the document area) it should select the layer. But this does not happen. In order to select an layer, I have to select it from the Layers palette.
So is there any way I can select an layer inside the document area?
I have upgraded from CS3 to CS6, apparently a no-no. BECAUSE: when I open a CS3 file and work on it in CS6, save it, and then reopen it again later, the type layers are inoperable. Clicking in the type area to edit changes the type to something that was on the former CS3 file. For example, if I typed "BOY" in Univers in CS3, and in CS6, selected and retyped it as BOYHOOD in Times, clicking in the text area of BOYHOOD mysteriously brings back the old "BOY" type in Univers. If I unclick, sometimes it reverts to BOY and won't budge.
If I try to move text from one doc to another, it comes in as different words and style and size in the other doc.
I am using Photoshop CS5 on OSX 10.6.8. When I try to create a new file or copy and paste within an open file, I receive this error message: "This is not a valid Portable Document File (PDF) document. It cannot be opened." This does not occur when opening files, only when creating a new document or working within an open document. I have tried deleting preferences and resetting all warning messages but nothing has worked.
View 1 Replies View RelatedI'm getting this error when opening two specific PSD files in Photoshop CS3 on Windows XP Pro:
"This document has been damaged by a disk error..."
I've been testing hard drives and memory, as well as looking at other files, and as of now I think it's not a systematic problem; rather, I suspect that these two files were damaged when migrating from my old computer.
I have two questions for anyone out there who has troubleshot this issue before:
1. One of the files has a violent green stripe 50-100 pixels wide in Photoshop, but when opened in Gimp it looks fine except for two individual pixels that are pure green. The other has a blue stripe across it in Photoshop, but looks fine in Gimp. (I am comparing specifically the background, without any layers.) Why would the Photoshop and Gimp views of the same image differ so widely?
2. Does anyone know of a script that can check all files for this error? Sitting there opening all of my thousands of PSDs one at a time seems like a royal pain, and something that could be automated by someone who knows how...
While working and when the job was nearly done (Photoshop document with several layers to correct wrinkles, teeth, neck...) , I found out that the document is setup RGB.I have to convert it into CMYK but I don't want to merge it or lose layers since I need them in another Photoshop document too.
While converting the image from RGB to CMYK, I found out that some of the layers (hue/saturation adjustment layers) don't exist anymore when converted to CMYK...How do I get these layers (or at least the effect they give to the design) in CMYK?
Basically I am making a new pattern of stars, so I created a 1000 by 1000 document, filled with black, added noise, then added an adjustment layer to thin out the noise and make it look like stars in space. It looks great!
How to save it without the effect changing. I tried flattening the image, and it messed up how I wanted it to look. I tried merging visible, that didn't work. I tried just saving it as a PNG, like I do with all my projects, but that didn't work. And defining a pattern did the exact same thing. I just want to have what I physically see on the screen save as is so I can use it with other things.
Could not complete your request not valid photoshop document
View 1 Replies View RelatedI've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
I get a "Could not complete your request because it is not a valid Photoshop document." error message whenever I try to open up a PSD file created on a Mac using Photoshop CC on my PC using CC. Other people have been able to open the file from the same location, so the files aren't corrupted.
View 2 Replies View RelatedHow does one make a document one color and type in text of a different color?
View 2 Replies View RelatedWhenever I try to use the type tool in Photoshop CS5 (Mac) I get the message "Could not complete your request because of a program error." I already tried cleaning out the font cache and I validated all the fonts installed on the system and all passed.
Mac OS X 10.6.8
2.66 GHz Quad-Core Intel Xeon
8 GB 1066 MHz DDR3
I'm trying to do some work on a file I set up months ago. First, I tried to copy some text to paste into another program. I got this back:
"Could not use the type tool because of a program error."
I'm using a font called Hit the Road. Interestingly when I changed it to Myriad Pro it let me copy and paste.But - when I went to save the file out as a PDF, I got a similar message:
"Could not save as “xxxxxxx.pdf” because of a program error."
I've tried clearing my preferences and restarting the computer. I haven't uninstalled PS.
I'm using:
CS6 13.0.4 x64
And I'm on a:
MacBook Pro 13" Retina running up to date Lion
2.5 GHz i5, 8GB memory, Intel HD Graphics 4000 768 MB
I ran an error log from PS and got this -
2013-04-13 16:43:37File weather site.psd closed2013-04-13 16:43:37Photoshop quitDelete tool preset 44Delete tool preset 43Delete tool preset 42Delete tool preset 41Delete tool preset 40Delete tool preset 39Delete tool preset 38Delete tool preset 37Delete tool preset 36Delete tool preset 35Delete tool preset 34Delete tool preset 33Delete tool preset 32Delete tool preset 31Delete tool preset 30Delete tool preset 29Delete tool preset 28Delete tool preset 27Delete tool preset 26Delete tool preset 25Delete tool preset 24Delete tool preset 23Delete tool preset 22Delete tool preset 21Delete tool preset 20Delete tool preset 19Delete tool preset 18Delete tool preset 17Delete tool preset 16Delete tool preset
[code]...