Did you know that photpshop CS2 has 8 different layer types and you can have up to 8,000 layers.
Also if you have a image with layers, if you press CTRL right click on it, it will give you your layer names. Click on the layer name and hey presto it will pop up ready to work.
We're trying to do a simple thing like using text to filter an image. We've loaded a jpg image, changed it from being background, and try to add a type layer (as instructions said would happen). However, when we type, there is no new layer in the Layer palette, and thus we can't use it as a clipping filter.
I know about how some images don't create type images, but we've even tried creating a type layer with no image background. It just won't create a type layer.
I have upgraded from CS3 to CS6, apparently a no-no. BECAUSE: when I open a CS3 file and work on it in CS6, save it, and then reopen it again later, the type layers are inoperable. Clicking in the type area to edit changes the type to something that was on the former CS3 file. For example, if I typed "BOY" in Univers in CS3, and in CS6, selected and retyped it as BOYHOOD in Times, clicking in the text area of BOYHOOD mysteriously brings back the old "BOY" type in Univers. If I unclick, sometimes it reverts to BOY and won't budge.
If I try to move text from one doc to another, it comes in as different words and style and size in the other doc.
When I launch Photoshop CC the following error appears: Some of the type layers in this document were rasterized because an error prevented them from being read. Also when I click the text tool, a similar message appears, I am unable to create text. I am using a PC running Windows 8,
View 1 Replies View RelatedJust recently started getting the follwing error when opening any file up in Photoshop CS6 Extended. Running Windos 8, 64bit with 16GB of RAM and plenty of free disk space.
"Some of the type layers in this document were rasterized becasue an error prevented them from being read"
Select one type layer, as you can see below, the character panel reflects the setting correctly:
Select TWO type layers, with the exact same character attributes.. what happens?
It should say in the image above 36px/52px, not 12.16px (.16 px? Really?) and 17.56.I haven't the foggiest idea where that even comes from.
But the result for all photoshop users is that they have to individually change all the layers individually..I was hoping character styles would work, i have yet to figure out how it even works, i've tried multiple times, it just doesn't do anything to the selected type.
I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies View RelatedI often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies View RelatedHow to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies View RelatedHow do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies View Relatedmerged layer results to a slight different color compare to its original unmerged layers. the result is that the merged layer has more bluish, What's wrong and what's the solution?. Im using CS3.
View 9 Replies View RelatedI have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers. I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers.
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
I am loosing all my layers effects when I merge all the layers together to save the image in the tif format!
View 2 Replies View Relatedhow to unlink my "background" in the layers pallete from the other layers.
I am using photoshop CS2. on a mac OS X.
When i make changes to other layers in the layers pallete, it changes my 'background' as well. I know that i can duplicate it but regardless, the 'background' changes according to what i do to the other layers even tho it is locked.
I want to create a PDF from Photoshop while keeping on a master layer/group for all pages AND turning on/off individual layers/smart object in another group? I know there may be a way to do this with Layer Comps but I would rather just use layers.
View 3 Replies View RelatedI need to merge 2 adjustment layers with 2 image layers. When I do, the look changes. Are there ways to do this without changing the look? I have attached a screen capture of the layers affected. Additionally the "Stars" layer has a "Screen" blend mode. This is on a Mac.
View 2 Replies View RelatedI have brought in photos, added colour layers, and have had type files not show up in this particular document. There are seven other layers behaving normally. How to "find " these layers in the layers Column list as I would like to 1. move one, 2. delete one, and 3. merge one.
View 5 Replies View RelatedI have 3 layers
TEXT
SHADOW
BG
the blending options are normal for TEXT and BG, but I have soft light for SHADOW. Now the BG layer actually contains an illustration which makes my shadow look realistic, however what Im trying to do is, save the picture with a transparent background with only TEXT and SHADOW showing, but as soon as I hide BG, the SHADOW layer will go back to the black color I drew and not look like a shadow. I tried merging text and shadow but either the TEXT gets soft light and gets ruined or SHADOW becomes normal and gets ruined. Its very late, ive been trying to figure it out for the past 4 hours so I hope I explained it clearly.
why don't I see all the layers in the Layers palette
View 2 Replies View RelatedI would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
I am just starting to learn C# and .NET and I am trying to write a simple program to gather all the layers from a drawing in a directory, save them to a list, and use that list to change those layers to the appropriate layers. The way I want it to iterate is open the first drawing, gather the layers, ask the user which layer they want to change the original layer to, and when they select the new layer, it associates that old layer with the new layer so that in the future it won't prompt the user, it will just change it to that layer. Then it changes the layers and goes to the next drawing.
I wrote something very simple in LISP, but I need to make it more advanced and try to add in more features. Specifically I would like to be able to do everything in the background, without actually opening the drawings so I can avoid any user prompts or dialogue boxes.
I am at a complete loss at where to start though. There are so many members in the different namespaces for Autocad. Right now I am looking through acdbmgd.dll and acmgd.dll to try and find something useful, but I have no idea where to even start.
My guess would be to first define a method that gathers the layers from the drawing and saves them to an array. For example i would have multiple arrays for the different layers to which I want to convert the old layers, string [] 0layer, string [] walllayer that contains all of the layers to be changed to layer 0 and wall layer. Then I would compare the layers in the drawing to those arrays, if they are not present in any of the arrays, the program would prompt the user and ask which layers they want to change the existing layer to and add it to the appropriate drawing. Then all of the layers in those arrays would be changed to the different new layers.
At the very least, I am going to start making the different arrays to be filled. That much I can do. I'm just having trouble actually getting the data from the drawings.
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
when i select diffrent layers,the layer's name in toolbar does not change, i can not change the layer, color,and other settings.my autocad version is 2006 and 2007.
View 5 Replies View RelatedI'm working on a rather complex piece of artwork in Illustrator CC with the latest Mac OS, with several objects on each layer.
Whenever I click an object, its layer in the Layers palette auto-expands, pushing all of the main layers off of the edge of the palette. I then have to click the little arrow to collapse the layer so I can see all of the other layers and (quickly?) get to the one I need.
I am using a Magic Trackpad (don't ask) so this task is particularly arduous, as the cursor is often somewhat difficult to maneuver when attempting to target small UI elements. My display height is only 1050 px, so naturally I would rather not make the layer thumbnails any smaller (25 px.)
Is it possible to disable or defeat the auto-expanding behavior? Placed in bold
Why in the heck do Macs show layers in a PDF that are HIDDEN at the time of saving if "Create Acrobat Layers from Top-Level Layers" is checked is checked -BUT- PC's don't??
I just proofed a business card with my boss accidentily showing him some type on a layer that was hidden. He approved it. Now I have to make a bunch of type set up in very tight margins work in production.
Is there a way to collapse all layers in the layers panel with one click?
View 1 Replies View Related