I have images to print up poster size,does it make a difference if I hand the copyshop/printer a very large jpg as opposed to the same image as a tiff or tga?
(especially considering I have vector text that needs to stay crisp)
I'm having a problem with .tga files. They don't seem to be supporting transparency under any saving conditions unlike in Photoshop 7. I think this also affected Autodesk Maya before because i applied a .tga texture i thought had transparency in, and the material turned everything tranparent. Is there a way to get the format to keep the transparency like it used to?
View 2 Replies View RelatedI went to save a file with Alpha channel, RGB, 32-bit as a .tga but the file format wasn't there under the save as options. I've done it before and don't understand why it's not working now. I've tried everything - even ran install again. Didn't UN-install first - should I? I've even opened previous .tga files and tried to do a "save as" so I can change the name, but .tga not available. Even had the tga file open, then just hit save and it came up with a "save as and only gave about 4 options. This is an install on a laptop with a partioned drive running Vista 64. The adobe programs are installed on the c: drive in the Program files (x86) folder. Only thing new in my system is the addition of a second monitor and a cordless bluetooth mouse. Also, the text engine is goofed up - can't work because the text tool engine can't initiate.
View 4 Replies View RelatedI am trying to save a targa file with a transparent background.
View 3 Replies View RelatedI've got a short animation that I'd like to export, mainly because it's faster to use the tween function than manually adjusting my picture and saving every frame manually. Anyway, it doesn't look like Photoshop allows you to save animations in the Targa format and keep the alpha layer that I need in each individual frame. How I might go about either exporting the animation and keeping the alpha layer, or finding some way to work around this without having to manually copy the alpha layer to each individual frame by hand after I export it?
View 5 Replies View RelatedI have PSE9 and need to create an image without the background (mk background Alpha Channel) and save as Targa. I can edit the pic, save at 32 at 200k but PSE9 does not allow to save/create Alpha Channel. How do I make the (background an) alpha channel and save as Targa?
View 1 Replies View Relatedplease help me, when i go to save my image as a targa file it doesnt allow me too tick the alpha channel box, i need to save it as a targa file aswell, how can i sort this?
View 1 Replies View RelatedI been having a problem with 3ds Max 2010 crashing in Mental Ray. Not enough memory problems. I know you can use Photoshop and convert your jpegs into Targa files at 32 bit and a image size that is easy for 3ds Max 2010 to understand without crashing mental ray. I forgot the Image size. I ran across it in another forum, on another website, but lost the link to the forum. It's been years since I remember the site.
what they do for texture images in Material Editor in 3ds Max 2010. I am messing with image size around 2000 x 2000 or 4000 x 4000, which are Poser 8 texture maps.
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedI use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print. I am slightly confused on how to do this for the following reasons: Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size. I am not sure if "document" and "canvas" size are the same? Could somebody please advise me. Basically, I want to enlarge my tiffs to fill a European A4 size page. GF
View 2 Replies View RelatedI get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
I am having trouble printing to an HPÂ Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have a drawing where some lines have a 60% screening in there Plot Style. Â The print great from AutoCAD. Â But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.
I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X. Â I'm creating the PDF from AutoCAD 2012.
I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.
View 1 Replies View RelatedI have two layers. One is set to red color, the other to blue color (using ctb). I have both layers defaulted to 1 mm line weight thickness. Blue is continuous and Red is dashed.Â
When printing the blue layer prints at the correct weight of 1mm, while the dashed red layer prints at a much smaller thickness. All line properties are set to default or bylayer (this is not being caused by the lines having individual special properties).
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies View RelatedI wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
Â
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
Â
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.