I'm using the oil paint filter and for some reason it doesn't turn out when I use it. It doesn't seem to be an issue for very very small sized images, if I make the photo smaller it will work just fine. However, for any regular sized images I get this result below. I just got a new computer, so i'm not sure what the issue could be?
View 5 RepliesI'm running CS6 on Windows7, Intel HD Graphics P4000 with driver updated. I have used the oil paint filter successfully in the past. Now when I try to use it, the filter window comes up, and it notes that the image I want to work on is at 25% size, but it remains blank -- the image itself never shows.
View 2 Replies View RelatedAll of a sudden my images turn white when I go to apply sketch halftone to image.It worked before.
View 1 Replies View RelatedCS4 animated zoom doesn't turn off. I have it unchecked in preferences but zoom still animates most of the time.
View 1 Replies View RelatedAfter some time my filter->wind doesn´t work properly. Instead of the wind going outside the figure it makes it go inwards. I mean the area of the figure decreases instead of increasing.
View 1 Replies View RelatedI have an autocad LT drawing with multiple layers - When trying to add a new layer I now get a message saying "A new layer was created that does not match the current layer filter"
Have I inadvertently turned on a filter and how can I turn it off?
Photoshop did get an update. However, the shake reduction filter does not appear as an option.
View 5 Replies View RelatedLr adjustments doesn't turn up when editing in Ps. I can see there´s many others who experience the same problem right now. Is it some bug with the latest update of Ps?
View 11 Replies View RelatedI have files with oodles and oodles of layers, mostly from various x-refs. I Purge as many layers from x-refs as I can but we all know how fond some *cough*engineers*cough* are of layers. When I use the Layer Manager, I first click on the X-ref-category and then tick the Invert-box at the bottom. This nifty trick means that I only see the layers that I have created in my drawing.
The problem comes when I open the drawing the next time.
The X-ref-category is still in effect but the Invert-box is unticked. This means that I see all layers that I didn't create that are in the drawing. This is all fine and dandy if I am in the Layer Manager. But I also use the drop-down-layer-list on the Ribbon to quickly change layer on obejcts. And that drop-down-list is affected by the sorting in the Layer Manager. So I can't move my objects to the layer I want, because all I see in the drop-down-list are the x-ref layers.
As I said, this is more of a peeve than anything, and it's not a big deal to open the layer manager, click All Layers and then go on with my life. But it's just one more sigh each time I open a drawing.
Why can't the Invert-box stay ticked?
Or why can't the selection revert back to All and not stay on x-ref-layers?
encountering a problem with radial filter when sync it to multiple images? I am getting a different dimention and position every time I sync or press previous. For the rest of the settings are remaing the same.
View 13 Replies View RelatedTurn off sheets that are not done (but I still want the sheet layout setup in the project browser.) So that hey do not show up in the automatic index on the cover sheet.
View 4 Replies View RelatedI'm programming buttons in Edge Animate, which are just symbols with their own timeline. I've given them actions in click, mouseover and mouseout states. They just call URLs and work correctly, but I've noticed that the cursor doesn't turn into pointer (the hand pointing with the forefinger) in mouseover state. This creates a bit strange feeling, because users won't be sure that they are buttons before they click them...
View 2 Replies View RelatedI'm having problems with the oil paint filter in CS6. It runs and looks fine while in the filter, but once I commit the changes and go back to Photoshop, there are one to three bright squares of fluorescent green (sometimes pink, I think) overlaying parts of my image. I have a Radeon 7450 graphics card and Windows 8. Have drawing mode set to basic because of the flickering issues.
View 42 Replies View RelatedWhy my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
I too am getting the oil paint error when I try to use the filter. I have a new Toshiba L675 with Windows 7.
View 1 Replies View Relatedwhen i open the filter, 10-15 seconds later the screen goes black then white and an error message pops up saying that the nvidea "driver crashed and has recovered."
Â
I cant turn off openGl because i won't be able to sue that filter.
I'm using Photoshop CS6 on a PC. When I tried to apply the oil paint filter, I got an error message saying
"The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
The CS6 oil paint filter is not working. The error is: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
Â
I have the latest graphics driver software. I have the latest update for CS6. I have followed various community support recommendations to no avail. In the Advanced Graphics Processor settings (preference, performance) only "Basic" is available and I can't select (grayed out) "Use Graphics Processor to Accelerate computation" and can't select "use OpenCL".
Â
My System: Windows 7 (64 bit), HP Pavilion dv6-3250us Notebook with Intel(R) High-Definition Graphics Driver. Here is system information (from CS6):
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
i use the Type tool in PS ,input few words, and rasterize the type layer, then run filter"stylize->solarize", but nothing happened ,why?
View 4 Replies View RelatedWhen I click on the oil paint filter it barely opens and the disappears.
View 8 Replies View RelatedI replaced a standard hard drive with a new SSD drive and did a fresh install of Windows 7 and all of my programs. I made sure all Win 7 updates, program updates and drivers are current. The good news is Photoshop CS6 Extended loads much faster. The bad news is now Photoshop crashes when I attempt to use the Oil Paint filter. The only hardware change is the new SSD, I haven't changed any video devices and I never had any issues running the Oil Paint filter before I swapped out hard drives and did the software reinstallations. I've tried the OpenGL Drawing Mode in basic, normal and advanced, and still get crashes when attempting to use oil paint.
Â
System info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
[code]....
I am getting. I'm running Win7 64bit, photoshop cs6 (also 64bit), have an i7 2600 and 16GB of RAM and an ati 5870 card running the latest drivers (12.8)
Â
So, the operation could not be completed whenever I try to run the oil paint plugin and when I try to use the iris blur, my canvas goes blank. If I pull it out of docked mode and put it in a window, it's still blank until I move the window about and I can see my image, but as soon as I stop moving the window around, it's blank again.
I have need for some of the effects of Paint Alchemy and especially Terrazo. Any OS X filter set that does what those filters did?
I know there was an OS X version available for a while, but now I can't find anything.
Trying to apply the oil paint filter to a 45" x 30", 300dpi, 16-bit image I an error dialog that says: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
Â
The menus all become gray and the software freezes so I can't quit, but Force Quit does not show "not responding".
I want to turn OFF autosave. I cannot handle frequent interruptions while cloning, painting, ... etc. as PSP saves my large file every other minute!!!
I have looked at the AutoSave Preferences, and read the related HELP, but cannot turn Autosave off as documented. There is no check box next to the "Save edits ..." line in the Preferences --> Autosave Settings on the Adjust Workspace tab. My only option is to say OK or cancel. I cannot change anything!
On my zoom toolbar the command 'Fit to window' is faded out and does not function. I have set my window preferences to allow this functio yet it does not work. I want my rulers to fit to the image.
View 6 Replies View RelatedHow to turn a photo into a silhouette (I think that's what it's called). How to go about doing it?
Â
There's two styles I'm trying to do. One is all one color, and the other is two colors kind of highlighting shady parts. Here are the two examples:
Â
[URL]
how to turn down the opacity of the eraser?
View 5 Replies View RelatedAs I was cropping this image from a black background (not layered), I forgot to crop a single column of black pixels. However, I almost missed it, because the canvas always has a small shadow, for the simple purpose of looks. Is there any way to turn this off?
View 3 Replies View RelatedI have A background Image I want to make transparent how would I do this I know how to make the background behind the image transparent but not the image its self.
I want to be able to make the whole thing transparent/translucent.
I do have this in png but it is 2.5 meg and only aloud to post up to 256k
OK, my friend has an iPhone and he has a photo program that let's you select a color (such as red) and take a photo. When it comes out, everything that is normally red will be red, but anything else will be gray (b&w)
Is there a plugin that will allow you to do a post-processing to a photo like this?