Lr adjustments doesn't turn up when editing in Ps. I can see there´s many others who experience the same problem right now. Is it some bug with the latest update of Ps?
View 11 Replies
Sometimes when I want to edit a LR edited photo in PS, even when I open a copy with LR adjustments, some of those settings get lost when the PS file opens, especially brush adjustments.
View 7 Replies View RelatedLooking forward to this update because i use a Fuji X pro 1 and I had read that lightroom 4.4 now supports this camera and sensor.
However after updating all I get in the Lens adjustment under Fuji is the Fuji x100 which has been their for some time.The exif info is showing the correct camera and lens used etc.
I have tried uninstalling and then manually removing any left over files and folders with no luck.
Do i have to install support for this camera as an addon?
Also if i look in the lightroom folder Camera profiles/camera it only lists Canon, Nikon and Sony
I use two monitors while editing and in the past I was able to edit in Lightroom on the left monitor and do other things on the right (ie. email, netflix etc...) Now Lightroom wants to use my right monitor to show me a preview of whatever picture I am working on. I cannot manage to override this and turn the preview off. Is it something within the program or do I need to change something in my control panel?
View 4 Replies View RelatedWe have a bunch of shots taken using natural light - the shots all have completely different exposure and white balance adjustments.
Now that the shots feel like they've been shot at the same time of day (and on the same day) we'd like to start adjusting the white balance accross multiple shots - but use the current white balance/exposure from each individual shot as the starting point - not reset the adjustments.
Kind of like baking the current settings or making adjustments on top of current adjustments - or make new adjustments relative to the current adjustments.
I'm on Lr, edited some files to get a panorama, clicked on "edit in" then "merge to panorama in photoshop. All right until there. The problem is that once clicked it switchs to Ps CS6 and merging the pictures in a panorama but without the editing I did before in Lr (white balancing, lens correction and so on). I mean that Ps creates a panorama starting from the original pictures as if the pictures were not edited in Lr while I would like that - as I always did - Ps starts to work from my Lr's editing. I think that it is something about settings.
View 1 Replies View RelatedThought this was a Photoshop problem. When I select a portion of an image in Photoshop (which has come from Lightroom) and press Delete, it no longer brings up the Fill dialog; it just deletes the pixels.
After some discussion on the Photoshop forum, I see that now, when I tell Lightroom "Edit in Photoshop", it creates a file which does not have a Background layer, and this causes the Delete key to act differently. This was not the case several weeks ago, but has just started to happen. Is there any adjustment I can make to the "Edit In" settings to get a Background layer in Photoshop?
I'm new to Photoshop (CS5) and don't see the automatic masking layer appear when I choose from the adjustments panel (I have to create one in a separate step). Is the automatic feature something I have to turn on?
View 6 Replies View RelatedI'm using the oil paint filter and for some reason it doesn't turn out when I use it. It doesn't seem to be an issue for very very small sized images, if I make the photo smaller it will work just fine. However, for any regular sized images I get this result below. I just got a new computer, so i'm not sure what the issue could be?
View 5 Replies View RelatedCS4 animated zoom doesn't turn off. I have it unchecked in preferences but zoom still animates most of the time.
View 1 Replies View RelatedI am editing a profile. Is there a way to trun off the gray boxes so that I can see the text input box (in blue behind the gray box).
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Turn off sheets that are not done (but I still want the sheet layout setup in the project browser.) So that hey do not show up in the automatic index on the cover sheet.
View 4 Replies View RelatedI'm programming buttons in Edge Animate, which are just symbols with their own timeline. I've given them actions in click, mouseover and mouseout states. They just call URLs and work correctly, but I've noticed that the cursor doesn't turn into pointer (the hand pointing with the forefinger) in mouseover state. This creates a bit strange feeling, because users won't be sure that they are buttons before they click them...
View 2 Replies View RelatedI have noticed that CS6 Editor does not add a "_edited" or something like that when I pick Save As. This is not a terribly bad issue but if it is just that I have a setting wrong then I really would like to know.
View 4 Replies View RelatedLightroom adjustments that I make to an image are not being carried over when I "Edit in Photoshop CS6". I'm using LR 4.1 and ARC 7.1.
View 5 Replies View RelatedI don´t know why, but suddenly there seems to be no way, I can get edit in PS with LR adjustments. There used to be an options box in LR when selecting "edit in Photoshop". Now I get no options, and my adjustments from LR does not show in PS. I have tried both the tiff and PSD setting in preferences/external editing, but no luck. I have also used the "Reset Warnings" in LR, hoping this would bring back the external edit dialog box, but no luck.
as I have a lot of urgent work to do, and I go back and forth between LR and PS a lot.
Mac OS 10.8.5
Photoshop CS6 13.0.5 x64
Camera Raw 8.2.094
Lightroom 5.2
I have recently opened a LR catalog from an external hard drive connected to a new mac pro. All the 'user templates' are there and all the images in each respective collection, although I had to re-connect them as the originals had moved to a new external hard drive but... most (not all), but most of the images I had adjusted in 'Develop' have gone. Most of the images I made a virtual copy of before adjusting have reverted back to the original raw image without the adjustments.
If I have to start all over again from scratch or is there a magic 'LR Develop adjustments' file I haven't transfere to the new laptop and hard drive?
Are the modifications that you make during development added consecutively as you make each one or are they all added up and applied once at the end?
In other words: say I have a RAW file, well exposed, but it's flat and boring. So I choose to knock the whole thing down 1 eV in exposure. Then I use the adjustment brush and add 1 eV to just my subject. Is my subject essentially untouched as to exposure, or has the subject been brought down and taken back up and thus would have some inherent noise and whatnot?
And does the same apply for adjustments other than exposure, like clarity or tint?
I am using LR4 and PS-CS5. I just upgraded to LR-4 but now when I select an image to edit in PS, the LR adjustments have been stripped. I have looked at preferences and menu items but cannot find how I can change this.
View 3 Replies View RelatedI have reinstalled LR4.1 to the new hard drive on my computer. Had to import all the images again, and all my LR adjustments seems gone? Mapping, keywords, rating, development adjustments etc... The old catalogues are on the new hard drive. How can I get LR to find my ajustments? Or do I have to do it all over again :S ?
View 2 Replies View RelatedWhen I use send an image from LR to PS using "Edit in..." Only some of the LR adjustments show up in PS. (E.g. color adjustments are visible while crop and exposure are not). All versions (LR, PS, ACR) are the newest. I am on mac OSX 10.9.1.
View 11 Replies View RelatedI upgraded to LS4 without a hitch, and updated my catalogs. Everything seemed to work fine for a few days. Then I tried to drag my LR catalog onto another drive and open it from there. Afer that, it all went down the tubes, regardless of which copy of the catalog I open.
Normally I'll make adjustments my my imported RAW files in LR, then hit "command-E," and edit original to PS CS5.1 (all software is current release), with LR adjustments rendered to that TIFF file. Now, I don't ever get that dialog box, but I do get another box telling me to update to Camera Raw version 7.0, which I understand is not available yet. So I hit "open anyway," and the image appears in PS but without any adjustments. Furthermore, it appears to be an opened CR2 file, rather than a TIFF. I didn't even know PS could open a CR2 file without the Camera Raw plugin dialogue launching. So, it appears I have a CR2 file opened rather than a TIFF, despite the external editor presets being correct (TIFF, 16bit, etc.).
I can render it using lightroom, but that doesn't work for me because I need to be able to not save a tiff I've created (layers of different adjustment settings I discard), I need to be able to click "don't save" but that way just automatically saves them. Also,
I am running windows vista with lighroom 4.1 and CS4 11.0.2.
If I edit a photo with lighroom and send it to CS4 for final editing I am not getting any lighroom adjustments transfered with the image. I have been using lightroom 2.5 with no problems and now I have upgraded to lightroom 4 I am having problems..
I'm having a problem exporting a DNG file as an original or as DNG with adjustments. All the exports is the original DNG file. I do get a clean export with adjustments when I export to jpg.
here's the details: software is lightroom 4.1 and camera raw 7.1. File was NEF converted to DNG on import. numerous adjustment to tone, w/brushes, etc. xmp written to file. tried dng export preset as well as through the export module. exported to various versions of camera raw. all with no luck. opened in CS 5 and Preview, with the same results: no adjustments to DNG.
I have won a free high-end print and the printer says DNG will be better.
I have upgraded from LR4 to LR5, but my adjustments from developer module, stars, keywords tag etc is missing. I think I moved the catalog from 4 to 5 instead og copied
View 5 Replies View RelatedWhy my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
As you can see, I am in a frantic stage. I just finished editing through close to 800 photos of a wedding that I recently shot. After I finished editing them I went to the floder location, in Windows, not Lightroom 3 (huge mistake), and I made a folder inside of that folder called "raw". I selceted all of the photos and then moved them into the that folder. So, the files were in weddings/021812/ and I put them in weddings/021812/raw/ . When I went to Lightroom, of course it said that the files were offline. Instead of finding the missing folder, I clicked "synchronize folder" and pointed towards the "raw" folder. I noticed that the images were importing without their setting and I cancelled the synchronization. I went back to windows and moved all of the photos back to their original folder and now when I try to "update folder location", the photos do not show up in Lightroom.
View 13 Replies View RelatedI would like to be able to sort a set of photos by those that have Develop Adjustments and those that do not. For now, I don't want to sort by the type of adjustment.....just whether or not an image has one.
View 3 Replies View RelatedI use [k] to get me into local adjustments, and [z] to zoom in, how I can pan around without deselecting the local adjustments (which loses which local adjustment I have selected). I tried [fn]+[arrow key] without any luck. This is very disruptive for me.
retina MBP + OS X 10.8 + LR4.1
I need to pass raw files, but I would like to apply my adjastments. Can I do it with Lightroom?
View 9 Replies View RelatedI just bought LR5 yesterday. I own Photoshop CS5. Normally I open my images in LR, make my raw adjustments and then open in CS5 for my creative editing. When I do that now from LR5, the adjustments revert back to the original settings when opened in CS5. I downloaded and installed the new Camera RAW 8.1... it didn't make a difference.
LR5 is useless to me if the adjustments don't transfer over to CS5 as I ALWAYS use finish in CS5.
