I have Photoshop CS6 and i updated my graphics driver and oil paint still isn't working, I have a Mobile Intel 4 Series Express Chipset Family. Version: 8.15.10.2869
I read other discussions on the forum and still it wouldn't let me use Oil paint. It still gives me an error saying "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI've seen a few posts regarding this error, The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacture's website for the latest software, and have tried many of the suggestions with no success. I have a Dell Inspiron with an Intel(R) HD Graphics Family.
Is the problem that my graphics card is not supported? Has there been any fixes or resolutions to this issue?
I too am getting the oil paint error when I try to use the filter. I have a new Toshiba L675 with Windows 7.
View 1 Replies View RelatedJust got CS 6 (not extended) When I click Oil Paint Filter I get the following msg.
The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check manufacturer for the latest software.
Is it my graphics card. If so, how do I check to see what I have? I have an HP about three years old.
I'm using Photoshop CS6 on a PC. When I tried to apply the oil paint filter, I got an error message saying
"The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
There's no way to get back to the regular paint.net site from the documentation. On the banner at the top, you can hover your cursor over the "paint.net" part of "paint.net documentation" but it takes you back to the documentation. So without manually going back to the site, there's no way through the site's GUI to get there. So it's a small gripe, but it's also easily fixed.
View 1 Replies View RelatedI'm trying to scan a picture using a LEXMARK Platinum Pro905 all-in-one printer with PSP X3 (v. 13.2.1.20). Lexmarx drivers are the latest available.
Please note I'm using a French version of PSP so I'll try to translate the titles, menus and messages in English. I'm going in File > Import > From a scanner or a camera (3rd option)
A pop-up windows is opening with settings for scanning. I'm able to modify every option if I want to. If I click on "Preview" (with a document in the scanner), I'm getting a preview of the document. Using the preview, I can select the area of the document I want to scan. So far so good.
When I click on the "Scan" button, the pop-up with the scan setting is disappearing (which is probably normal) but a pop-up error message is displayed right away :
The French says "Une erreur s'est produite lors de la lecture du fichier".
In English, it would probably translate by "An error occurred while reading the file". The only choice I have is to click "Ok".
I also tried with another scanner (HP Scanjet Q4010) with same result. Both (Lexmark + HP) are using an USB connection. In the past (few months ago), I was able to scan a document using this method with my HP scanner and PSP X2.
I installed PSP X3 trial version to see if I actually wanted to buy it, but after installing it, I keep getting Not Responding when I try to open the program.I am running out of time on my trial time.
PS: I have the same problem with XI, so I reverted back to Jasc PSP9.
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
It's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
View 13 Replies View RelatedI purchased PSP X4 Ultimate, a little over a year ago, and recently purchased a new computer. (I had purchased the software through the corel.com website digital download, so I downloaded the files directly from their site.) After installing it on my new computer I started getting the Authenticity can not be Verified Error.
View 3 Replies View RelatedI made some changes to a photo and when I went to save the changed photo(save as) in JPG format I get an error writing file to drive, no explanation and it wiped out my original photo on the drive.
View 2 Replies View RelatedImage with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
My PSP X3 locked up and I had to use the Task Manager to close it due to "not responding." This has repeated each time I have tried to load the program, including trying the suggestion of pressing "Shift" and trying to launch the program on a reset. There's no error message, it doesn't get that far. The welcome screen loads, shows the program is updating the cache, etc. but then it goes to no response, no error message, just 100% locked up. Have to use the Task Manage every single time to get it to close.
Right before this happened yesterday, I also experienced difficulty copy and pasting one image or selection into another. No paste commands would appear. I tried doing the "clear" selection as posted online, but no real answer on that either.
short of uninstalling and going through all that crap again. I'd buy the latest version, but since I've had no end of problems with this version I am hesitant to move forward if there are more bugs.
Every time I try to change my profile image, I get an error message saying.
"The file you uploaded is too large.
This section will allow you to specify a photo to be used in your profile which is viewable by other board members. Photos must be no bigger than 150 pixels by 150 pixels."
The problem is the image is already smaller than 150x150px I've checked multiple times.
I recently installed some "Megalo's Plugin Pack" and it just kept crashing my paint.NET, so I tried going to the effects and file types folders and deleteing all the plugins, but there was so much I had no idea which was plugin stuff and normal paint.NET. So I just deleted everything paint.NET and tried reinstalling it, but it just says "Fatal error installing paint.NET (1603)"
View 10 Replies View RelatedI cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
I don't know if it is a bug, or something to do with Windows7 but it has been bugging me for quite a while.
On my old computer (which ran Windows XP), i could choose to open several images in PSP (all versions i had at the time) and the number of selected files didn`t seem to matter. Now, on my new computer (since a few years), i run with Windows7 and i find that if i select more than 4 files to open at once (usually jpg or png) i get an error message asking me to "select a valid file". If i deselect enough files to reach 4, it opens them fine.
It is not a big issue, although it might get a bit annoying if i have 20 small files to open at once, as i have to do it in groups of 4 at the time.
The PSP X4 trial I was using expired yesterday. Today when I try opening .pspimage files in X3 that I originally created in X4, I get an error message that says they are not valid Paint Shop Pro image files.
View 14 Replies View RelatedI installed PSP x6 ultimate using the install 32 and 64 bit versions. I tried to install the kpt and creative content and get the following message-
"setupnewsetup.cpp(143)
PAPP:
PVENDOR:
PGUID:
$15.0.0.498
@windows vista service pack 1 (7601)
IE version:9.11.9600.16428"
I also get the same error message using the 2nd dvd to install "perfectly clear" and "ultimate creative content".
I am running windows 7 pro and don't know why I am getting the error messages. Could this be because they do not run on the 64bit versions? If so when asked to install both versions would they run. There is no program start application for the 32 bit version even if you select install both.
Just upgraded from X3 to X4, software initialy worked fine, then I installed the KPT add in and now I get the following error message when attempting to view any pictures...An error has occureed while trying to read from the file.
View 1 Replies View RelatedI have installed my PSP X4 and from what i see it looks great, faster loading, but every time i click on a jpg i get the error message "an error has occurred while trying to read from the file"..i have looked in preferences and found nothing, i have reset it, and also tried ctr F8, but still cant get my jpgs to show to use them,
i have used PSP since about v5 and never had a problem like this before
I am creating photo scenery for Flight Simulator X - my source files are large bmp's. From each of these I create a greyscale file which I Save As a tif file. However, when I recompile the bmp and tif together, I get error messages. Most common is a reference to Date/Time being incorrect.
If I load the tif file in GIMP, it reports "Incorrect Count for field DateTime (21, expecting 20); tag trimmed" - If I then save the tif in Gimp, it recompiles without errors.
Halfway installing PSP Prox4 from my disc or via the web, error message comes up: "The system can not find the device specified" and "Your system has not been modified".I have the latest drivers and DirectX installed.
View 2 Replies View RelatedI installed Paint shop pro X2 on windows 7. I get an error message "detect language0 failure exiting".
View 4 Replies View RelatedI just purchased Corel PaintShop Pro x4 today.At the beginning of installation, a box pops up and says: "The feature you are trying to use is on a netwok resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "vcredist.msi" in the box below."
Nothing works when I change the destination folder, and when I finally click "cancel" another box pops up saying: "Error 1714. The older version of Microsoft Visual C++ 2005 Reditributable cannot be removed. Contact your technical support group."
When I'm saving my file as PSD I have strange error with "nice" description.The only way to avoid it is search and delete design elements - I found that its caused by one text object.
The question is what can be wrong with text object to generate this error. I can edit text and do everything with it but I cant save it as PSD. Its hard to find it in big complicated designs. I think similiar problem was in Corel Photopaint X3. Seems like it left to X6 version.Bug exists in all files with text objects.
system configuration:Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version: X6 VERSION: 16.4.0.1280
I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
