i desperately need a -free- or -shareware- photoshop plug-in for mac that does the mirror effect, you know like splits the image horizontally or vertically and flips it to mirror it, or make multiple mirror images kinda like a kaleidoscope?
View 3 RepliesI want to mirror cut the models "selected" portion but it gives me result very far to it which is highlighted with red in the screenshot.
View 1 Replies View RelatedKeep getting an error when trying to create the object reference using Excel 2011 and VBA macro. Are added files needed for Photoshop CC?
View 2 Replies View RelatedI have installed Genuine Fractals to try out. It is supposed to be a PhotShop plug-in.
But now I can't find it listed under filters or anywhere else.
Although by default it installs into the Plug-ins>File Format directory, after not being able to find it in PhotoShop I also copied into the plug-in folder too in case it needed to be there instead.
It does show up in the Help> About Plug-Ins list although it offers no help. It just shows that I have 20 uses left on the trial.
I'm looking for a script or action that will put the file name on the bottom of the picture. NAAP has a good one today but it puts it in a PDF file. I just want it on the JPG.
View 1 Replies View RelatedI just installed my new Photoshop CS2 and transferred all my plug-ins and other stuff from Photoshop 7 folder, but I cannot seem to transfer all the saved actions that I have on the 7 and that's bad. I have saved quite a few important for me sets of edits that I most frequently use with my images as actions and I apply them with a single click. I need to find out how to transfer them into my new version if possible.
View 1 Replies View RelatedDoes anyone know of a tute for doing water with large waves and spray?
View 1 Replies View RelatedI am experimenting with radial gradients and also elliptical selections with feather applied later via de Refine Edge command.
View 5 Replies View RelatedI'm curently using PSCS6 just for photo editing. My files typically never exceed 250MB(with layers) and rarely in excess of 8-9 layers.I plan on sinsatlling a 120 GB SSD scratch disk in a MacPro so just wondering if a 120GB scratch disk is sufficient - unfortunately I'm unaware of how to calculate or determine how much scratch space is required for oprimal performance.
My other option is a 1 TB 7200 RPM drive. my boot drive with Mac OSX will be on SSD as well.
I currently use only 2D applications. I'm having a problem with text. No matter what font I use the text comes in as a block, if I need to make a correction I have to explode the text before I can edit it.
In my much earlier version of AutoCad I didn't have this problem. I can't find anything in the text settings windows to change this. Is there a setting or flag in 2013 that will just use text without having to explode each occurence of it for any editing?
I'm using VideoStudio proX5. Previous versions of the VS program have allowed me to opt out of using a preset image template for the menu pages and instead to choose a background image of my own to put behind page headings and video thumbnails or text titles. I can't see how to do this in VSproX5. Any background image I introduce is always partly covered by unwanted areas of template and the right-click menus won't let me delete or move them to the back. I just want a plain uniform background and to be able to choose the coolur.
View 4 Replies View RelatedI have some assemblies that are made of iLogic parts. The code within the assemblies causes a common external rule to run in each of the parts to update the part's metadata (descriptions, part numbers ect.) to relect any changes to the part.
However, when a change is made to the assembly, not all the parts are effected and yet my code will still run the external rule within the uneffected parts. This slows things down some, but more problematic is the fact that the uneffected parts need to be checked out/revised, even though they themselves haven't changed.
Is there a way of reorganising my code so that external rules are only run in parts that are effected by the assembly change?
I want my pencil to be different in size from the eraser. Is there any other way other than to assign a new brush every time the tool is needed? I thought of maybe writing a script (possible?) to add another menu bar with my tools preconfigured.
View 2 Replies View RelatedI'm looking for a method to load images into an animate animation shortly before they are needed? My animation is (and has to be) really big (already 7mb and growing) so I want to find a way to load my images just before they are showing up in the animation. The process is sometimes known as lazy load and I would like to do something like this to my animation.
The standard preloader is not really an option as it takes ages till the users can see the start screen's content.Are there any preloading alternatives?
I would like to know about the permission needed to edit the autocad file. In my folder there are many autocad files. I need to give the edit permission to one particual file to a specific user.
First i tried with folder level security. But i failed.
1. I have given full permission for the particular user (Except: Delete,Write Attribute) in the folder level. But when i tried to open the drawing file, it throws an error. Error: "File is currently using by the user1. Would you like to open the file read-only?"
2. I have given full permission for the particular user (Except: Delete) in the folder level. Now i could open the file successfully. But after editing, when i tried to save the document, it throws an error: Error: "Unable to save to drawing D:TestTest.dwg as it is being accessed by another session. Drawing saved to "D:Testsav460B.tmp"
3. Now i have given full permission for the particular user including Delete permission in the folder level. Now i could save the drawing succesfully after editing.
From this , i guess, it needs delete permission in the folder level to edit and save the drawing (I understood this is for creating/deleting tmp/.bak files during saving the document.). But giving delete permission in the folder level is very risky.
When I export as a jpeg the images obviously are compressed, however, they also get darker and more saturated. Is there anyway to compensate for this without having to overcorrect the image before exporting?
View 4 Replies View RelatedWhen you're working on a sketch in the part environment the status bar shows the number of constraints needed to fully constrain the sketch. For example "2 Dimensions Needed".
How do you retrieve this value using Visual Basic Net?
I have a simple sheet metal part that does not require explicit bend radii. We leave it up to the shop to fab this part up as long as it's final outcome is within tolerance. We don't normally include a flat pattern, simply because it could cause confusion when cutting a blank. I use the default bend allowance and bend radius, which gives the exact blank size and bend locations. But our local fab shop probably doesn't/won't use the correct tooling to provide the exact bend radius, so this will throw off the final outcome if the blank was cut using the flat pattern dimensions.
I can apply the flat pattern to my drawings, because there is some sheet metal components we have that require the flat pattern to show cut profile features.
What are the folders of my current CorelDRAW installation i can back-up and use them to replace the folders of a new installation so to retain all my settings (workspaces, customizations, shortcuts, settings, plugins, etc)
I need to uninstall and re-install my current installation
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
Main question: I need the user to be able to type a command. Then use it or cancel it. Then i need them to type another lisp command. In the second command i need to know (have the string of) the previous command they typed in. How do i get that string?
What I have tried.
I have looked at "LASTPROMPT" though not extensively, and i believe it would just return "ineedhelp" if i tried that.
I have looked at "CMDNAMES" but that gives the command you're currently in.
And I have found one page on this forum titled: Command Line History Macro, but there was no answer on that post.
I could create a global variable for that string, but then I would have to put the set code in every function I create. Nope, will not.
Backstory:
There's a person that is going to make how-to videos on how to use some of my lisp routines.
Anyhow, I need the user to be able to type in "ineedhelp" and the lisp that runs must get the last command's string go to the shared drive and pull up the video file for that command.
I have made a lisp that opened a word file before, and if i could get the string of the previous command, i'm fairly certain that I can get the videos to work.
There will be approximately 60 lisp routine video's.
How to mirroring an image
View 1 Replies View RelatedWay do I do a mirror efect in Photoshop?
View 1 Replies View RelatedHow do I mirror an image? That is to flip it round so that instead of a person looking left, they're now looking right.
View 2 Replies View RelatedIs it possible with Photoshop (7.0) to reverse an image, i.e. so if the photo had someone in a T-shirt, the letters in whatever logo would be backwards?
View 1 Replies View Relatedhow to create a mirror image in Photoshop 7?
View 2 Replies View Relatedwanting to know what effect to use to make it have a mirror effect on the bottom of the image. Its kinda hard to explain but you have the photo itself then the effect that it is mirrored up at you.
View 9 Replies View RelatedI saw an image a while ago, but I cant find it.
Basically is was a mirror, made in photoshop, which appeared to have been in a bathroom with a hot shower running. Then someone had 'engraved' into the mist some words.
I was wondering how to do this. I figure the mist is some sort of cloud filter, but thats it, I cant make the mirror even.
Is anybody using Focus Magic or PhotoKit Sharpener with CS4
View 17 Replies View RelatedI am seeking for the software to buy for an arsenal of filters, textures, and all the other cool stuff we enjoy.
View 9 Replies View Relatedif there is any plugins for the above version of photoshop?
View 3 Replies View Related