Photoshop :: Inconsistencies When Using Automatic Colour
Dec 15, 2012
explain the inconsistencies I am having with automatic color in CS6 updated on a Mac with OS Mountain (latest version)?
1. A screen-capture of 4 separate images - they are in 4 separate layers
The 5th layer of "Copyright Do Not Copy" does not affect automatic color!
2. An entire working PS screencapture
3. If I use Image >> Automatic Color on 1 layer at a time, the images go blue (cold)
4. A second Image >> Automatic Color illustrating the cold automatic correction
5. a. If I Layer >> Merge Layers or Layers >>Flatten Image
b. Image >> Automatic Color I get a slight color correction as I would expect.
6. If I use the any of the identical images from the first image at the top then Image >>Automatic Color, it goes cold (Blue)
If I keep all 4 images together without any white area between them or around them and then Image >>Automatic Color the correction again like # 5 is only a slight color correction.
Why the inconsistencies in Image >> Automatic Color in these different settings,but all of the same images
View 1 Replies
ADVERTISEMENT
Jul 26, 2012
I have received shp files from a county source and am confused on the inconsistency of the Object Data. They sent me a piece of topo in a shp format and I used MAPIMPORT, then opened a new drawing, did a query, alter properties, picked the elevation, related it to the object data, and all the contours have elevation, no problem.
They also have the zoning in shape files. However, using the same workflow as above, the object data is not there. If I use data connect and look at a property filter I can see the object data so I know in some way it is connected.
What causes the inconsistency between the shape files? how to use the property filters? I would do it that way if I could figure out how to properly do a property filter.
View 4 Replies
View Related
Apr 20, 2012
I have checked every setting and have even redrawn the file where the error occurs. We send out for prints to a printing company as we do not have a plotter so I need to fix this. When the file is converted to a pdf. the "sand hatch" seems to be printing at an inconsistant lineweight all within the same section. This error occurs when printing from a DWG to export to an Adobe PDF. The hatch is all on the same layer same settings and drawn in the same action period. it makes no sense why it would change when all the settings are exactly the same.
I have also tried drawing them on a new layer i created matching the same layer settings and it still converts inconsistant in the same two areas. I have completely erased that section of drawing and redrew it not changing out of any tools or settings and it just keeps doing it. I have also tried checking all the pdf settings and tried plotting it different ways and it wont dissapear. The only time it does not show up is when i export a window shot directly from model space.
But i need to print it from paperspace and this is where the error occurs. It almost seems as though the export is not processing the drawing corretly as it is converting the drawing but i dont know how to fix it. I first noticed the problem when i recieved the prints back from the printer as you can clearly see the hatch appears thicker and darker in two sections along the same hatch. I then looked at the pdf and it appeared fine, but as i zoomed in on the pdf up to 300% that is when you notice the change.
View 9 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Jul 26, 2013
Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
Feb 15, 2006
Is there a way I can apply a psd to many pictures at the same time? I've been trying some watermark programs but they didn't work... I want to keep the transparency from the psd on the pics
View 1 Replies
View Related
Feb 27, 2008
I have 10 images that are same shape and size and i must transform them all to different shape that is very complicated, can i somehow transform one and then transform them all the same way as first one?
I cant just group select and transform because i need to use Wrap filter.
View 1 Replies
View Related
Feb 27, 2008
I have 10 images that are same shape and size and i must transform them all to different shape that is very complicated, can i somehow transform one and then transform them all the same way as first one?
I cant just group select and transform because i need to use Wrap filter.
View 1 Replies
View Related
Feb 27, 2008
I have 10 images that are same shape and size and i must transform them all to different shape that is very complicated, can i somehow transform one and then transform them all the same way as first one?
I cant just group select and transform because i need to use Wrap filter.
View 1 Replies
View Related
Jun 21, 2013
Some my .psd files (CS6 Photoshop, MAC OSX 10.7.5, Processor: 2.5 GHz Intel Core i7) automatically resize to a percentage. I can't figure out what the cause is, and it will not allow me to change it back to 100% to slice out images for web.
File Type is .psd - RGB 8 bit/color
Fie Dimensions are 1400px by 10,800px.
File Size is 60MB
The file is extremely slow to open and adjust anything within the file as well, not sure if the issue is related. I am working off of my desktop not off of a server.
View 2 Replies
View Related
Jun 3, 2013
In Photoshop CS6, I have Shape Layer B clipped (ctrl alt G) by Shape Layer A. SL-B has a color fill different from SL-A, and has 50% opacity. Is there a way to automatically make every new Shape Layer drawn to have the same transparency and fill color as SH-B, and should also be clipped by SH-A?
When I select SL-A and then draw a new shape layer, it copies the fill color of SL-A and is clipped automatically. When I select SL-B and then draw a new shape layere, the new layer copies SL-B's fill color, but not the transparency, and it is also not clipped.
View 1 Replies
View Related
Jan 18, 2008
I just noticed that Adobe is downloading ExtendScript Toolkit 2 on my computer automatically. I only have Lightroom and CS3. Do I need to have this on my computer?
View 6 Replies
View Related
May 6, 2009
I have a big picture project coming up, and i need to finnish to retouch a large amount of images a day. This means it would be nice to have a function that would open the next picture in line when the one im finished with is closed, or something similar and effective like this.
View 2 Replies
View Related
May 6, 2009
I have a big picture project coming up, and i need to finnish to retouch a large amount of images a day. This means it would be nice to have a function that would open the next picture in line when the one im finished with is closed, or something similar and effective like this.
View 1 Replies
View Related
Apr 16, 2008
I did something when using the grid and now Extras defauls on with each image load. I have to do a CTR H after loading a new image to turn it off. Anyone know how I can set it back to default off.
View 2 Replies
View Related
Jun 8, 2009
I'm not sure how this started, but whenever I create a new adjustment layer, it automatically comes with a clipping mask to the layers below it. If I run an action with adjustment layers, all are clipped to the masks below them. I've looked for toggle switches in the preferences and elsewhere (with no luck) for a way to turn off this feature.
View 13 Replies
View Related
