For a while, I have been using gimp program but I've recently downloaded photoshop to try. I've used gimp for so long that I'm used to using the beside tool. The problem is that I don't like the results of gimp's path stroking smoothness. I want to export the gimp paths into photoshop to give the paths a smoother stroke. Is there a way to get gimp be ore paths into photoshop to stroke?
View 2 RepliesIt would be nice if there was a way to import all the Move Path settings for a project from an Excel-type spread sheet. It would reduce the irksome data input errors that I seem to make all too often. Plus, you could use the power of the spreadsheet to calculate different points/frames.
View 3 Replies View RelatedWhy the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View RelatedWhen i creates a new path with Shift+Click by path tool no new path created in path dialog.Why?
View 3 Replies View Relatedi can save a path i've created with the pen tool in one photoshop file, but i'd like to import that same path into a new photoshop file. how can i do that?
View 2 Replies View RelatedI have a graphic that's been created in Photoshop. Is it possible to take that graphic and import to Illustrator so that it can be made into a path, that way I can manipulate it without losing the intergrity of the image.
View 1 Replies View RelatedDoes Smoke keep the file path of a photshop import? If so, how do I find it?
View 7 Replies View RelatedI'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
Is it possible to import a 3D DWG (lines) to be used as a path for a sweep? I'm assuming (because I've found that it appears not to possible) that model lines must be assigned to a workplane and that "floating" 3D lines from a DWG aren't assigned workplanes and therefore can't be converted into Revit Model Lines.
View 9 Replies View RelatedI'm working on a graphic in which I wish to have some text around a circle. I know, I know, use "Text to Path" ... except that will not work in this case because the text I want to have go around the circle is not from a font, but drawn by me (my other other project; find a program for creating font files that I can afford to make a proper font so "Text to Path" would work).
So, I have a selection (and a path from that selection) that is basically the outline of the text I want to manipulate. I have another selection for the circle the text is supposed to go around. What is the (probably obvious) thing that I'm missing to get the text selection path to be drawn on the circle?
I have problem when I try import imagen inside Edge stage. Then I need close the file and re-open to fix the image paths.
I note that Edge create a image folder to save the image inside the Library.
Do I am doing anything wrong trying drag/drop image inside the stage?
I'm having serious issues in Illustrator CS5 trying to import SVG files with nested clip-path properties.
Illutrator seems to create unnecessary groups, and messes up with group parents, effectively screwing things up.
Here is a minimal example :
<?xml version="1.0" encoding="utf-8"?><!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd" [<!ENTITY ns_svg "http://www.w3.org/2000/svg"><!ENTITY ns_xlink "http://www.w3.org/1999/xlink">]>
<svg version="1.1" id="main" overflow="visible" xmlns="&ns_svg;" xmlns:xlink="http://www.w3.org/1999/xlink">
<g id="piece-1">
<g clip-path="url(#cpform)" id="form1">
<g clip-path="url(#cplogo)" id="logo1">
<rect fill="#FF0000" x="10" y="10" width="1000" height="1000" />
[Code]...
Such a valid SVG file displays fine in Chrome, IE, Opera, Firefox, but Illustrator fails loading it properly, because it creates two groups between "main" and "piece-1" (which is in itself not too bad), and sets piece-1 as a brother of another unnecesarry group from which piece-2 will descend. piece-2 and piece-1 are then clipped with piece-1 clip-path, which is just plain wrong and screws display.
Note that you can move piece-2 to the root of the document, which restores the display. But save this fixed file, and open it again : it"s back to its broken state.
Does anoyone know if this is fixed in CS6 ? If there is a workaround ?
way to make parallel shapes using the Path Tool similar to Photoshop?
I haven't used Photoshop in a while, but I remember that you could hold CTRL (on PC) and click with the Pen Tool and it would straighten up your shape for you once the paths are connected and would like to do similar in GIMP but can't find out how.
I am a bit skilled in basic gimp use but I am looking to do text along a path in gimp 2.8. I under stand about creating a path making it visible etc but i cant use the add selection tool nor does my text options include the button to text along path i read a post on a video some one mentioned a plugin i tried to find the plugin and could not getting extremely upset . Is there a plugin i need if so where can i dl it and how do i install it .
View 2 Replies View RelatedI've been struggling to get some text to go along a circular path. I've finally done it, but it's going along the wrong part of the circle - I want it to go along the top and it's part way round - and I can't seem to find a way to move it along. I've tried several times but it does the same thing each time.
Also the text isn't showing in the right font, although it is in the text box. Am I missing something?
I'm using GIMP 2.8.2 and I have problem with the Selection to Path tool. I've been using this tutorial [URL] to create a pie chart, but once I use the ellipse selection tool and create a circle I can't select to path (the option is greyed out).
View 4 Replies View Relatedi trying to stroke a text path, but when I stroke after selecting "Text to Path", the stroking "eats into" the text, instead of stroking outside of the text.
In PS, there is the ability to stroke inside, along the middle, or outside of the path.
How, in GIMP, can I select where the stroking occurs?
I've created a complicated polygon (hundreds of nodes) with the Paths Tool and am trying to fill it. When I select the Bucket Fill Tool, I get a tiny little error message at the bottom that reads: "Cannot modify the pixels of layer groups". Now then, I do have a Layer Group in the Layers tab to collect text items, but this is a Path in the Paths tab (which I thought was separate).
I have tried switching the path from Stroke to Selection, but it doesn't seem to make a difference.
In the past, I've used Fireworks (mainly), Photoshop, and Illustrator with varying degrees of success.
I just downloaded GIMP 2.8 for Max Snow Leopard. I like a lot of the new features, particularly being able to use the one window feature.
I'm having some challenges with Text along path. I found it under the context menu okay. However, when I use it, only part of the words I'm trying to put on the selected path show up. I was using three words that amount to a total of 20 letters. The last half of the last word is getting cut off. I've tried several different things to no avail.
j pgs can contain paths info. In Photoshop you'll be able to get that path.
We use it a lot for packshots, this way we can save a JPG, but with an embedded outline Path, this way you'll always be able to "cut out" the packshot by selecting the path.
It does not work with gimp .
Is there documentation on using the 'text along a path' command for gimp 2.8?
The documentation that exists ... [URL] ....shows the path tool in the tool box but I dont have this button. Is this documentaion out of date?
I found somewhere saying that 'text along a path' has been moved to the text context menu but I cant figure out what this context menu is supposed to be.
Text Along Path tool. I create a path then select the text tool and type some text. I click on the Text along Path button and an outline of my text shows up along my path. That's as far as I can go. How do I make the text stick there? How do I complete this process. I know the solution is simple but I can't figure it out and I don't see it in the GIMP manual.
View 1 Replies View RelatedI've saved a file with paths as .xcf and I can call up the paths again in the paths dockable dialogue. But I can't actually see the anchors or edit the paths. How can I continue working on a path I was working on before?
View 2 Replies View RelatedI'm an occasional Gimp user and am having a problem tryingto create some CD/DVD labels. I want to put text on a curved path but haven't beenable to get a persistent path.
I've followed instructions in the help manual and from the "Beginning GIMP" bookabout creating a path but the path won't display after switching to a differenttool.
These screenshot links show:1) Using brush selected for path
[URL].... Using line selected for path
[URL]...Resulting path (same for both types)
[URL]....
As soon as I select the text tool, the path disappears. Obviously I'm missing somestep that would make the path persistent or I'm misunderstanding how paths work.Shouldn't the path remain visible?
The Gimp version is 2.6.12 on a KDE desktop under openSuSE 12.1 & 12.2.
I have been using it to create graphics for the pin-back buttons I make. I have been using the Photoshop 1" button template located on this page:[URL]
The template has the words "perimeter text" that follows the inside of a path on the template. In the video demo on the same page in which the user used photoshop to demonstrate, she just hovers over the text with the mouse after selecting the text tool and is able to click on it and just change the exsisting text. I have not found this to be the case using Gimp. Is there a way I can easily edit this text, or do I have to create my own text along the path? If I have to create my own text along the path, how do I make it so the text follws in inside edge of the path?
I tried to install the "RMA Path Blend" plugin into my plugin folder, however it is not appearing in GIMP under Filters>Render>Path Blend.
View 2 Replies View RelatedI have an image, and I want to add some text along a curved path beneath it. Imagine the motto beneath a coat of arms, or a product or company name beneath a logo.
Now, I tried using the text tool to add the text along a path, and I think that I now understand how that works.
Now it turns out that there is a feature missing that I would like to see, which is that text justification should make the text conform to the ends or centre of the path... by this, I mean that if I draw a path and the text is too short to fill the whole of the path, I should be able to centre the text along the path.
The way around this that came to mind is that if the path is a circle then I can place my text starting anywhere, and then rotate that layer to centre the text beneath the image.
So I make a circle selection, and convert the selection to a path... but the path seems to start at the top of the circle (I don't now what you want to call it: 0°, 12 o'clock, top dead centre, North?) and go clockwise... meaning that if I rotate my text to be below the image it will be upside down.
My work-round is to create a temporary layer and draw a circle on it, then use that as a guide to create a path along part of the circle in an anti-clockwise direction.
But I thought that there might be a mechanism for easily swapping the start and end positions of a path,another, better way if placing text below an image,a way of centring text along a path.
I am trying to place my text along a path. I have followed the guides but gimp only places half the text along the path. I don't know what I am doing wrong. I have selected the path, text is on dynamic. It's a curve path but the text only goes up one side and it it not the full text. I have change size of text font everything I can think off.
111.tiff (Size: 281.24 KB / Downloads: 14)
Often I will have a complicated path that took a long time to make, only to lose it by selecting another tool. How can I restore a path after this happens? The undo function does not restore paths.
Also, is there a way so transform (scale, rotate, etc) a path? I know I could turn it onto a selection first, but I usually need to edit the path itself afterwards.
I finally managed to create some text along a curved path. That took a while. Now how do I A) fill it with some colour (it looks like it's just outlined text right now), and B) make it actually part of the image (exporting the image to jpeg, it doesn't seem to show up )
View 3 Replies View Related