how to Overlay an image on another image (as another layer, for example), that can be used with Actions ? I've just got Load image > resize > recolor > overlay image > save as... action now, but no idea how to Overlay the logo on top of the loaded image.
the problem with this is that due to the copy-paste action, the watermark logo is centered, which is not how it should be. i suppose i could put a black 1px dot in each corner,
For theoretical purposes, let's say that I am building an animation and that I have 10 layers in this animation thus far. Now, let's say that I would like a watermark to be overlay on every single one of these individual layers.
The only way that I would know how to do this would be to make a layer with the watermark, duplicate it nine times so that there were a total of ten layers with the watermark and then painstakingly go about the process of merging one layer of the animation with with one layer of the watermark and then repeat this process nine more times.
Whenever this situation comes up, whether it is a watermark or a correction of some sort that belongs on ALL LAYERS and I do this the only way that I know how, I think to myself that with something as powerful as CS 5, there has GOT to be an more automated and easier way of going about this.
I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I have some text on a transparent background. I want to apply an image over the text so that the image is only within the text lines.
View 2 Replies View RelatedI am trying to over lay an image,
I have one main image and what i now want to do is have a much smaller image, that will overlay the main one and place it in the corner say of the main image, so you can see both images,
How do I turn a photo into a watermark ? I want to make a background that's barely visible for a voucher.
View 2 Replies View RelatedIs it possible to use the crop tool but have an image fill overlay instead of a grid overlay? I do a lot of photo editing where the image has to be in certain boundaries but also has a complicated background, and I'd like to reduce a step.
View 3 Replies View RelatedMy Art teacher has just got Photoshop Elements 4.0, and needs to know how to 'overlay' one image on top of the other, for example, placing a leaf over a picture of a face and fading it slightly so that you can still see the face.
View 2 Replies View RelatedHow do you take a text image with a white background and make it invisible so when you put it on top of another image, only the text shows. The text has a shadow and a reflection, and it is it's own image.
Also, does photoshop have any kind of wordart? I used powerpoint to add shadow and reflection and glow to my text, but it would be perfect if photoshop had some kind of alternative (I'm sure it does, I just couldn't find it).
how can I insert an image as a Water Mark
View 3 Replies View RelatedHow does one create a watermark that can be placed outside the image? There will be a strike line surrounding the image and the watermark was requested to be placed outside that line. I started in Lightroom then progressed to Elements 10 looking for a way to do it.
View 1 Replies View RelatedI have two versions of a photo. One is the original, untouched version and the other has a translucent overlay on it. How would I go about isolating the overlay (for reuse)?
View 2 Replies View RelatedI've edited my photos, resized them all the same and now want to use the "process multiple files" funtion to put a watermark on each image.
In the past this has not been a problem but now when I use this feature, the watermark font size is inconsistent between each image.
I have a 200 photo batch and dont really want to manually put my watermark on it!
I need to overlay a transparent image of a tablet over about 50 images from a folder - is there any automated way to do this? I can use either Photoshop or Illustrator
View 2 Replies View RelatedI'm working for a client watermark his images. He has designed a watermark in PS CS6 that extends across the bottom of the image, the full width of the image. Like this:
Obviously, the images to be watermarked are all different widths and the watermark gets scaled up or down accordingly which is not the desired effect. On tall/thin images, the watermark is barely visible. Vice versa on wide or square images. I have tried many different widths of the watermark based on the widest and thinnest images. It works, but still not the desired effect for my client.
I've installed the Adobe Watermark Panel, but it seems that it wants to resize images with a width/height box on the right of the image quality and ppi boxes. (I might be reading that wrong though)
I've also tried several freeware programs. All work fine, but my client doesn't seem to think so.
So the question is, can I apply a watermark that doesn't get scaled? I know image height is a factor. I could write my own application to do it, but this seems like a re-inventing the wheel issue. I think the watermark should be scaled in height to a percentage of the image being watermarked and any excess width should be cut or truncated.
I know how to batch process images to place a logo or watermark on an image. Normally the image is different every time and the exact same logo is placed on all the images.
In this case the image is exactly the same every time but i need it saved in a folder 100 times each with a different logo. So essentially a reverse of the normal process. Same image different logo's.
There is a touchscreen monitor in my car.It allows custom background wallpapers to be loaded via USB.The touchscreen automatically adds what would appear to be about a 25% alpha black layer in FRONT of the image so the touchscreen controls and icons are clearly visible.The problem is, I don't know what values I'm supposed to adjust on my image in order to get it to look the same way it does on my computer screen.Would you adjust the brightness? Contrast?Or is this simply not possible because the ~25% alpha black tint is placed OVER the wallpaper?
View 14 Replies View RelatedI am trying to add the orangy-morning/evening overlay to an image.
I have a high resolution version of this image and I'm trying to add an orangy overlay so it looks like the morning/evening, so it looks like the third image below (Making a high resolution version of it).
I've tried playing around with hue and saturation without much success.
How do I simply apply a watermark to an image and have it save within Lightroom 4 without having to export each individual image? I also have Perfect Layers and am having the same problem, it asks me to save each image as a seperate file and it's incredibly time consuming. Am I missing something, or should I return Lightroom and stick with Elements, which has layers?
View 1 Replies View RelatedI'm trying to take an image and overlay it onto another image, which I can do just fine. The problem I am running into is that the image exceeds the borders and becomes nothing more than a dotted shape losing all its color. What I want to know is how do you expand the border so that the image once again becomes visible?
View 1 Replies View RelatedI want to take one image and overlay it on top of the other. How is that done in Lightroom?
View 1 Replies View RelatedAn export of .psd (works for raw and TIF) files with conversion to JPG where a visual watermark file is specified fails for .psd files.
View 1 Replies View Relatedexporting pictures with a PNG watermark to the exact ratio of 1:1 is impossible! that mean loss of resolution and quality of the watermark...I believe this is a BASIC function.Also the border distance trim for the image watermark, have too big steps.
View 3 Replies View Related How do I align/rotate a still image on the overlay track using Corel Pro x2. and is it possible to place text on the still image?
Windows XP H/P t650uk
2 Gbt memory
80Gb hard drive
i wanna write text but make it behind the overlay image track , how can i do that ? every time i write text it comes in front of the image.
I'm using X4 version.
If I have a picture with a transparent overlay, along with a nontransparent version of the overlay, is there a way I can remove the overlay from the original image?
One application for this would be removing GUIs from video game screenshots.
I have a 30 second .avi file, frame size 1440 x 1080 15 frames/sec Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I can play the video OK in vlc and when I insert the video into the timeline of VS X3 and play the inserted .avi.
As soon as I insert:
1. a .jpg at the start of the timeline with text and/or,
2. text (as a watermark) on bottom left hand side for the 30 second duration
whenever I play back (in VS X3 preview) this clip, the movie plays (but with a frozen first frame from the .avi) with only the audio with the text.
I have been using VS X2 successfully on my Windows 7 64-bit PC.I had purchased X3 sometime ago and decided to install my X3 version.
In Graphics Editing software like Photoshop you can rotate an image ever so slightly to the left or to the right. I'm trying to super-impose a png of a head onto something and I would like to match the angle of the original head.
View 4 Replies View RelatedTake a look at the following site:
[URL]
For the background image halfway down, there's a totem pole sort of "merged" in with the color. But it's not simply an overlay blend mode or opacity change. It has essentially seemed to adopt an entire palette based on the background color itself.
I think I recall a way to create this effect in Photoshop, but in GIMP I'm stuck. How would one go about making that "color overlay", given any regular picture and a colored background? I'm doing this for a website, by the way.
I am attempting to create screenshots from an old video game and one part of the game includes a semi-transparent overlay layer that I would like to extract into its own image. I am able to render each layer separately in the emulator I'm using, but the screenshot tool is only able to export the final rendered image, so the transparent layer, when rendered alone, still results in a screenshot where it has been merged with the game palette's background color. I have managed to get 2 different copies of the overlay image using 2 different background colors, but I don't know the transparency percentage on the overlay. Is it possible to extract the original semi-transparent overlay with its original colors and transparency levels knowing the original background color? I can get more screenshots with different background colors if that would work. Also, the overlay only has a 5-color palette, so it's not a terribly complex image. I'm attaching the images I have with the background colors included as separate layers in each.
View 3 Replies View Related