I can't figure out how! I know Lightroom has a feature, but the freedom with that one (fonts/colors/size) I have 900 images to stick a watermark on, and I really need to know how to do it in Photoshop CS4Thanks!
View 8 Replies
I am using AutoCAD Civil 3D 2011. I am wondering if there is a way to assign an mline to a figure style in the Figure Prefix Database. Ultimately I am trying to create storm drains that have a width automatically (ex. 12" SD would come in at 12"). Right now I have a single center line that comes in and I manually offset the line to create a width or I place an mline over the center line.
View 2 Replies View RelatedI've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
I'm tring to make a droplet and it's not working. I've created an action, the action works fine when applied to a photo while in PS, then I went through the steps to create a droplet. I set the droplet to appear on my desktop and the and set it to close and save. So I drag a photo onto the droplet icon and nothing happens, the photos just stay the same.
Ive made a bunch of actions and tried creating droplets for all of them and it's the same thing every time. I get the droplet Icon on my desktop, but when I drag a photo or a file onto it...nothing at all.
Used photoshop a few times before (succesfully!), and need to knock up something involving a infinity loop/symbol, or figure of 8 on it's side. It needs to have a certain shape or thickness. I'm sure i'd figure it out after a few hours, but haven't got the time for that..
View 1 Replies View RelatedI use Photoshop CS. I want to cut out a figure from the photo.
View 3 Replies View RelatedAttached are two files. First one is my best attempt at this endevour, the only problem with this one is that it isn't gold, I need it to be gold and the other is that I used the Chrome filter and it completely takes over the picture. I want to it to look like a figure but still be able to see that it's Costanza.
The second is the photoshoped version of the pose that I edited. The original photo was incomplete and had a background. I also made it grayscale in order to make it easier to color gold.
Third is a costanza version that I added the foot and part of the leg.
Ok I'm new to both photoshop and making a website, but I'm diving into both I know most standard websites have 3 columns to them, the main center website and then the side bars of color/design. The side bars are what I'm trying to figure out. The main background color of my website is going to be black, so I would like to have a dark grey side bars but then also wanted to layer 3 different images over the grey, in diagnol rows, parallel with each other, but almost kind of ghosted themselves... Does that make sense? How do I take a picture, and turn it ghosted/transparent almost so that they will show just ever so slightly on the dark grey side bars? Thanks.
View 2 Replies View RelatedIs there a faster way than having the image on a background layer and positioning all the text word by word? I want to do this for the state o hawaii and have the cities make up the islands. There 8 islands and it gets to be a little much jus word by word.
View 9 Replies View Relatedhow to create the explosion effect that's used on the 83' G.I. Joe action figure cards.
I've tried to do it freehand, but it's impossible to be consistant all the way around the drawing of the character.
how to use the marquee tool to delete the bottom 2/3rds of a rounded rectangle.
Here's what I am doing:
Clicking on the rounded rectangle and drawing it to the size I want
selecting the marquee tool and selecting the area of the rounded rectangle I want to delete.
After I selected the area with the marquee tool, I press delete and instead of the area I selected being deleted, the whole layer is deleted instead.
How do you get rid of the 3-figure cursor when in the rectangle select mode?
View 2 Replies View Relatedwhen I open two images in PSE9 how do I move the windows in order to transfer one figure to another?
View 1 Replies View RelatedWhere, and with what index/marker, does Photoshop store figure captions in JPEG files?
View 2 Replies View RelatedTexturing an .obj file with multiple maps keeps getting overlap when I paint on the figure.
I am very new to 3D Painting in Photoshop but I am nominally knowledgeable of Photoshop in general for 2D work. I exported the Genesis figure from DAZ Studio into an .obj file and painted on it in Photoshop 5.5.
When I paint on his face, other marks show up on his torso and thigh and eyes, even. It is like all of the diffuse maps are "stacked upon one another" (though not in layers, just one one layer.)
A thin white border around the figure that I had edited appeared out of nowhere. I was able to erase it before editing the background but now I can't erase it or remember how I did that.
how to get rid of this line? If by setting the eraser color to the background color, how do I do that? As I get rid of the line, I'd also like to refine the figure's outline so it becomes cleaner.
I want to know how you can get the coordinates of a figure that you upload in 'Paint.net' ?
View 4 Replies View RelatedWhere to start creating a figure similar to the attached image.
I'm trying to recreate a logo for someone who lost their original files and I'm struggling to create this little 'stick-figure'. Is CS6 the best place to try this or would I be best looking at an different software.
I need getting the crossing point for a survey figure relative to an alignment. I'm trying to use the IntersectWith on my active alignment. I'm able to see my figure in debug mode so, I think I've got access to each survey figure. I think I need to cast the figure as a com object to a acad entity using directcast, but that's where it's going bad. When using the ofigure.GetObjectId it returns an integer value and it fails in VS Express 2010 in the DirectCast when trying to pass the objectId.
The error (if I'm setting this up correctly) :integer cannot be converted to objectid
'Get figure crossing point Dim ofigures As AeccSurveyFigures = oSurveyProject.Figures 'Dim figEnt As Autodesk.AutoCAD.DatabaseServices.Entity Dim intPoint As New Point3dCollection() For i = 1 To ofigures.Count - 1 Dim ofigure As AeccSurveyFigure = ofigures.Item(i) Dim figObjectId = ofigure.GetObjectId Dim figEntity As Autodesk.AECC.Interop.Survey.AeccSurveyFigure = DirectCast(m_trans.GetObject(figObjectId, OpenMode.ForRead), Autodesk.AutoCAD.DatabaseServices.Entity) m_alignment.IntersectWith(figEntity, Intersect.OnBothOperands, intPoint, IntPtr.Zero, IntPtr.Zero) Next
I have a survey figure that no matter what will not come in with the correct elevations, its a spline (continous) curve that the elevations get blow up on.
Only thing I can think of is the when it starts to interpolate the curve it cant get the elevations correct, this only happens in the curved area, once it goes tangent everything goes back to normal.
C3D11
C3D12-13
Win7x64 6gb
I am having trouble plotting to scale, I have a large drawing which is set up in metres so I understand I need to scale up the figure by multiplying by 1000 but the problem is: I set up my paper at A1 and then zoom and adjust to an acceptable scale which turns out to be 1:850 by typing in .85xp, once drawing is printed to scale it is not 1:850 but 1:1185 approx, the thing is using the exact same method if I scale to 1:1 equivalent to 1:1000 the drawing IS to scale. Using design jet 500 and Autocad LT 2011.
View 9 Replies View RelatedI am trying to work on my figure database and have run into an issue I don't understand. Curious as to weather or not it's something I am doing, or just a bug.
I wanted to look at every possible line that could be imported so I created a dummy point file using the Figure prefix data base and imported it into one of my blank templates and ran into to curious issues.
Issue 1
CP is connecting to AA
Issue 2
OC only connects if the point has an identifier behind the OC, for example OC01.
Here is a copy of the figure database and point file I am using. I understand you will not have my layers, but the connectivity should be the same. Let me know if you need anything else.
I would like to find instructions or a tutorial on how to achieve this type of effect: [URL] ......
I've found lots of instructions and tutorials that deal with fiery or glowing text, but I've not found anything along the lines of this image.
In my document, all index entries will come from text located adjacent to an image, or on the facing page. I had planned to create a uniquely named character- or paragraph style for this purpose, and to import all items formatted in that style into the index topic list. Or is there some better method of tagging the captions?
Each figure caption consists of two parts: botanical name and source. If this design works, I propose to format the first part to a unique paragraph or character style, and add that to the index.
if that is the best approach, or other approach, and how best to implement it.
When bringing in some figures that don't match the figure prefix database in a drawing with a set default style for figures (settings tab>survey>edit feature settings) it is being ignored and the "standard" style is being created and used. Is there another setting?
(running C3D 2012 sp4, Win7 64bit, 8GB)
I have a survey figure in plan view that I want to project to a profile. I have a projection style set, and the command settings use this style. When I project the figure to the profile, nothing shows up.
If I try it again, the command tells me that an object already exists in the profile and will update it. What am I doing wrong? What is the correct procedure to project these lines to a profile?
using CIvil3D to figure volumes. I have a very large aerial topo from a couple years ago to compare against a topographical survey I completed this year. No problem creating surfaces.
Question: In the topo's, I need to get a volume from two different areas....one area being a fill area, the other being the borrow area. Don't want any volume data throughout the rest of the site.
Do I just create one large surface for each topo and designate boundaries somehow? Or do I need to create multiple surfaces for each topo? If this is the case, will I need to make sure any breaklines, etc. don't cross from one area to the other?
I have a biped that I created to rig a horse. It was originally created in 3da Max 9. The problem is that through the years and different max versions it has worked fine for the most part. But sometimes when I take it out of figure mode the clavicles want to go back to the original rotation. See the attached images.
I have used the rig in 3ds max 9 3ds Max 2010 and now in 3ds Max2011.
This problem occured mainly in Max 9 and now in Max 2011. I have had it happen on other bipeds used in normal upright biped mode.
It has a run cycle animated on it and the biped behaved the whole time it was being animated.
I recently put it in figure mode to model a saddle on the horse and now it jumps when I take it out of biped. I just reinstalled Win7 and completed all wundows updates and loaded Max 2011 and put sp1, sp2 on. A week ago I was working with it with no problems. Since rebuilding the system I have this problem.
Why are figure line styles and feature line styles not shared, or a parent / child relationship? Also, should match properties change the style of a feature line to appear to be the same style as the figure line? The style only exists in as a figure line style.
If we offset a Figure line (feature line stepped offset) we get feature line, then we match properties to a figure line that has the correct style. The prospector says the Feature line has the style of the figure line; however, if we edit the feature line properties the style is set to none.
I am taking a chair that i have and trying to make a 3d model of it on Inventor.
The problem that i have is this has many ridiculous curves and concaves. I wanted to know if their was such a tool, like a sculptor tool or something of that nature that will make a smooth 3D curvy figure.
I attached pictures of the chair to this message if that works.
I have a large number of screen caps from a DVD that I'm going to make a GIF out of. First, however, I need to use Photoshop to crop the images down to the part of the frame that I want. Is there a way to crop using coordinates or something? All of the images are the same size, so I figure that's the best thing to do.
View 1 Replies View Related
