I'm looking to take an apple logo and twist it. Just enough that users can still tell that it's an Apple logo but also looking sorta twisted up.
Starting a new blog twistedmac.com and would be great to get a logo on the go.
Panning / dollying the camera, the image plane is still trying to maintain a 'forward' looking view to the camera. I would like to lock the talent / image plane so that when I do a camera move, the talent is 'sticking' to the virtual news room I have used.
View 2 Replies View RelatedI can draw the marquee squares or elipse. I can draw them and constrain them and reposition them.
What I cannot figure out is once I have drawn the shape, let go of the mouse and want to THEN go and change the size & shape of the marquee, how to do it. How do I make the top/bottom of a circular elipse change? And then bring a side in? Do I have to keep re-drawing until I am perfect?
I have some images with some very tough lighting. I think the images were shot in the wrong camera ISO settings. So most of the pictures have 4-5 people in them and it is there faces that have this HUGE amount of overexposure going on. How can I isolate their faces to work on the exposure/lighting/color correction for their heads? And then select inverse(?) and correct the rest of the area?
Is it possible to twist a bar shape. I have the inventor part file as well as a jpeg file of what the device should look like. Is it even possible with inventor or fusion.?
View 3 Replies View RelatedI am trying to create a solid model of a helical gear and need to know how to include a rotation or twist with the extrusion.
View 2 Replies View RelatedHow do I get rid of this twist in my blend? I've tried to rotate the rectangles to eliminate the twist, but it doesn't seem to fix the issue.
View 2 Replies View RelatedI need to draw a transmission gear with spiral teeth, rather than straight teeth on a typical gear. I know how to work the extrusion tool, but I can't get the shape to twist so the teeth are all aligned.
Is there any way to do this in Corel Draw X5? I'm pretty sure Corel Draw is sophisticated enough to do something like this, I just can't figure out how. The manual shows how to extrude, but nothing really beyond that.
Essentially, I am attempting to create something similar to this: [URL] .....
But cannot get enough twisting action. I just need to know how to twist an object properly. For example, what I have done is created a two sketches of hexagons on offset planes, and lofted between the two sketches. If I rotate one hexagon sketch slightly, it will result in a twisting effect. However, if I want to get any significant amount of twisting, rotating the sketch does not work. I have tried with a goil, but that gets the entire object (with a sweep, in this case) to spiral.
Im trying to reproduce the part attached. Its a rectangular aluminum tube. .320 x .180 approx an inch long. I tried lofting 2 sketches but the result does appear like the attached image.
View 8 Replies View RelatedWant to twist the splines around each other like strands in a rope and then use particle flow to unravel them.
What is the best way to twist the splines?
I have a problem I am using Autocad lite 2011 and need to draw if you can picture a column with a 15 mm deep fillet 42 mm wide which has a ramp and twist applied to it spiraling all the way up it. How do i go about this.
View 9 Replies View RelatedI’ve attached an image of what I'm trying to create in 3D .I can make two straight prongs with no problem, but I can’t figure out how to get them to twist around each other as they are in the picture. It’s important that the two prongs are symmetrical and do not merge into one another where they twist.
View 9 Replies View RelatedI'm trying to do a 3d curve stair rail. I had the 3d spline path, I had the polyline rail profile, but after I sweep the profile, it end up being twisted at the end of the rail. Same problem happens when I did a sweep using a helix path, imagine a vertically placed rectangular profile at one end of the path then after using sweep command, the other end was somehow twisted on a certain degree. How can I avoid this twisting problem
See the before and after image. I wanted the rectangle profile to remain vertical throughout the whole sweep
We meet a strange problem that all the line and cirele are twist as display. copy this file to another machine, or another version of AutoCAD, the problem still exist.
is thare a system value to control display effects?
I want to add a twist to my inventor gear model (helical gear). I need a twist approximate 30 degree.
File attached.
I am trying to draw a sun-like shape. I started with a star polygon and apply the Twist effect. That gets me pretty good arms on the sun, but I'd like for something a bit more flame-like, so I'd like to get the arms to now bend back in the opposite direction. Is there any way to use or modify the Twist effect so that I can apply it a second time but bend further out in the opposite direction? Or is there some other good way to get the rotation along all the arms.
View 6 Replies View RelatedI have the following sheet metal application: A flat bar steel (strip) 40x1mm is bent and twisted around three cylinders. In our process, the strip is running in loop around these cylinders, like a conveyor-belt. At first, it is bent around the first cylinder (blue). Then, it is bent and twisted around the second cylinder (green). Between these cylinders, a flat part is modelled so that the strip will be bent upwards (twisted) around the next cylinder. The same is done between cylinder two and three. In praxis, when I bend the strip, no flat part will be present, because the strip is quite stiff, as it is spring steel. In my Inventor model, no stiffness of the strip is taken into consideration.
I am looking for a better way to model this strip, where stiffness of the material is taken into consideration.
plotting a MrSid using DVIEW TW 270 ? Naturally we've spend 2 days on this. DVIEW used to be a great way to create dynamic views...
View 8 Replies View RelatedI was wondering how to you create a forearm twist expressions for IK mode?
View 2 Replies View RelatedI am trying to model a forged steel table base so I can create some tooling to reproduce it. See the attached photo of the base. I am able to sweep along my 3D projected sketch path but there is a twist at the center that I believe I need a guide rail to control. I have tried to draw a rail but it fails.
I suspect I am not drawing my guide rail correctly as to create the slight twist. I was considering drawing a shallow helix along the 3d sweep path but not sure that this is the best direction to head next. I have attached the .ipt with the sweep (without guide path being used).
How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
I use DVIEW and my contour and slope labels shrink. I suspect the dreaded OE factor but cannot confirm.
Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedAll the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View Related