AutoCAD 2010 :: 3D Curve Sweep Without Twist At The End Of Path?
May 23, 2012
I'm trying to do a 3d curve stair rail. I had the 3d spline path, I had the polyline rail profile, but after I sweep the profile, it end up being twisted at the end of the rail. Same problem happens when I did a sweep using a helix path, imagine a vertically placed rectangular profile at one end of the path then after using sweep command, the other end was somehow twisted on a certain degree. How can I avoid this twisting problem
See the before and after image. I wanted the rectangle profile to remain vertical throughout the whole sweep
View 5 Replies
ADVERTISEMENT
Jul 9, 2013
How does one draw a complex curved line to act as the path for a sweep in REVIT 14?
I need to create an arch (shown in elevation), that follows a curved path (shown in plan).
View 9 Replies
View Related
Jun 7, 2013
I have a tunnel profile that I need to sweep around a path. This path is a 3D Polyline but it has arcs and slope associated with it. The sweep command has this automatic banking or twisting to it that just screws everything up. The profile needs to stay perpendicular to the path and the floor of this tunnel needs to remain flat.
I have attached the actual working drawing. It has the profile (which is a simple typical tunnel) and the path all situated.I'm working in AutoCAD 2012 if that really matters.
View 9 Replies
View Related
Jun 26, 2013
Is there a way to sweep a 3d polyline in AutoCAD 2012? Colleague has a sweep path that he wants to put radii in the corners. I know that in the past you could not do it. I didn't see anything in any post that told me otherwise.
View 3 Replies
View Related
May 11, 2011
I have looked through these forums and found plenty of sweep problems and the answers to the problems but none for this particular type. I made a 3d intersection curve and am trying to sweep a profile along that curve but I keep getting the discontinuous segments error. I am using standard inventor 2011.
View 9 Replies
View Related
Jan 7, 2012
I am practicing modelling 3D sweeps using an intersection curve, and tried to insert a swept cut on the attached model, but the ends are not circular. I assume this is because the plane which I drew the sweep profile on is not on the top face. Is there an easy way to rectify this and create the semicircular channel in the ends?
View 3 Replies
View Related
Jan 10, 2014
I have two faces of different size and am trying to sweep out a curve section between the two. But since the two faces are of different size it only follows the path with the original face selected.
View 4 Replies
View Related
Jan 24, 2012
Is it possible to sweep a solid along a 3d sketched line path to cut a groove / slot? This is like milling a slot in material on a milling machine so the cutter goes along a path removing material.
I can draw a rectangle that represents the side plane of a slot type cutter and this works but in the corners it is not working like a round cutter and leaves sharp corners which then need filleting to finish, but also I am not sure if it is cutting exactly as if a solid round/cylinder cutter would.
View 9 Replies
View Related
Jan 8, 2014
I am trying to sweep a profile throughout the helical sweep path which is a series of 3d sketches. The sweet prifile sweeps correctly to the first 3d sketch profile but whin I select the second line the preview is gone and Inventor gives me an error saying the sweep cannot be done. how I can have the sweep done throughout the helical structure.Attached is the ipt file.
View 3 Replies
View Related
Sep 8, 2011
Is there some way to get the overall length of a sweep path?
We are creating a 3D sketch to run a pipe cross section along and for the final material we need to know what the LF is.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 4 Replies
View Related
Aug 2, 2012
I am using Inventor 2012. I am trying to sweep the pink shape around the pink rectangle but I get a weird result. Can I not sweep around a rectangle from the center? See attachment. I want to add more to the shape but when I do the result gets weirder.
View 2 Replies
View Related
Feb 13, 2011
I have a project I'm working on which requires a sweep path to be a graphical parametric mathematical function in x, y and z.
ex:
x=1.25*sin(10*t)
y=sin(t)*(12+1.25*cos(10*t))+12
z=cos(t)*(12+1.25*cos(10*t))
(this curve is a groove in the surface a bicycle tire. It spirals around several times and gets subtracted from a solid torus)
I was using an old version of NX I-DEAS and this task was easily accomplished with the "function spline" feature. Is anything like this possible in Inventor? I know I could create a list of points in excel, but I'd really prefer not to.
View 9 Replies
View Related
Aug 29, 2013
I am trying to recreate and 3D model the impeller of a heartmate II LVAD (URL....) but I am having problems with the sweep along the helical path. The profile is the vertical line and the path is the helix. I want to use a surface output for now. I had to use Solidworks to generate a variable pitch helix and import into Inventor.
View 2 Replies
View Related
Sep 5, 2012
I encountered problem when using sweep (path&guide surface)
It was enable to give you preview option (which is a surface that i wanted) but when i hit OK. It gives error as the text box.I tried again to no avail.
View 4 Replies
View Related
Dec 30, 2011
I have a sweep that follows the shape of the path sketch, but the sweep itself is made to the right of the sketch. How can I get it to fall directly on the path? I have attached a picture of the sweep as well.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
View 2 Replies
View Related
Jul 11, 2013
I have been trying to convert this surface (attached file) into a closed volume. But somehow it isnt working.Then I tried to create this figure myself by creating two circles (one at the top and the other at the bottom) and then creating the path for using the sweep command , but it gives a error " sweep produces self intersecting curves".
convert this surface in to a sloid volume or if thats not possible can this geometry be created to the nearest possible approximation.
View 9 Replies
View Related
Jan 29, 2014
It's possible in maya to sweep a profile along a closed curve? Like in 3DsMax, for example to make a window frame with a particular section profile?
View 1 Replies
View Related
Sep 13, 2013
I am having a difficult time centered the helical path (the equation curve) and lofting the two profiles (centered) through the helical path in the axial rotation direction..
View 5 Replies
View Related
Sep 18, 2013
When preparing an assembly for export to a Revit family, all features need to be recognized as Revit features. I have a part which consists of a sweep with a 3D path, 2 planar sketches projected to a 3D surface to be precise. To make matters worse, it's a sweep whose end meets it's own beginning (the intent of this specific model is to just satisfy a shape, not necessarily reflect the way it's going to be produced). To date I have not found a way to have this sweep feature recognized as a Revit feature, be it as a single feature or multiple. I am running Inventor Professional 2014 on Windows 8 64-bit.
View 2 Replies
View Related
May 11, 2011
I have this part that need to be extrude along a complex path. However, every time i try this the bottom of the part does not stay parallel the the x-axis.
Here is the drawing:
Curved Stair.dwg
View 1 Replies
View Related
Feb 28, 2012
how to use the sweep command
View 9 Replies
View Related
Dec 22, 2012
I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
View 9 Replies
View Related
Jul 28, 2012
I've been following the Convert 2D to 3D video that is given in the Help section of AutoCAD 2012, and whenever I try to sweep the handle using the same methods that were used in the video it says that it is unable to sweep 1 selected object (when I select the path). I've attached the DWG file.
Also, when I went to use the 3D align feature I did exactly as the video did, but my handle wouldn't align with the side of the mug. It kept lining up with the side but never between the top and bottom of the mug like you'd expect. I kept having to move it to get it down where it needed to be.
View 3 Replies
View Related
Aug 15, 2013
I try to sweep along spline that made of elliptical arc and line.
Funny thing that I was able to create a solid few days ago by doing this method. Now I can't!
I tried even reload Autocad.
View 5 Replies
View Related
Jul 11, 2012
I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies
View Related
Nov 12, 2012
I have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies
View Related
Jan 29, 2014
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies
View Related
Feb 22, 2013
getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies
View Related
Nov 2, 2011
I am attempting to create a curve with the path tool and it seems like if I have a deep curve the curve becomes smooth but if I have a shallow curve (which is what I want), the curve is jagged and not very smooth - see attached thumbnail.
I've tried to convert the path to a selection then sharpen the selection and also add a feather to the selection to try and smooth it out but I have not been successful. How can I get this shallow curve I want but also get the curve nice and smooth?
Attached File(s) curve.jpg (10.35K)
Number of downloads: 17
View 4 Replies
View Related
Sep 24, 2013
I had actually just used it to render something, and went to create a new path to continue my picture. However, the path tool decided it doesn't like to curve anymore so when I click on the line it simply moves the object. I didn't change any settings between finishing my first path and starting the second. It is still in design mode.
I've also wanted to ask if it is possible to link two anchors together when one of the anchors in question is in a complete path. Like, say I have three lines and anchors forming a triangle, shouldn't I be able to link a new anchor to one of the existing ones? Because I sure as heck can't.
View 1 Replies
View Related
Aug 20, 2013
I am using Photoshop CS6. I created a curve path and a "new" layer that contains the brush stroke applied to the path. I want the brush stroke to dynamically update when the path is modified.
View 2 Replies
View Related
