I am using Inventor 2012. I am trying to sweep the pink shape around the pink rectangle but I get a weird result. Can I not sweep around a rectangle from the center? See attachment. I want to add more to the shape but when I do the result gets weirder.
View 2 RepliesIs it possible to sweep a solid along a 3d sketched line path to cut a groove / slot? This is like milling a slot in material on a milling machine so the cutter goes along a path removing material.
I can draw a rectangle that represents the side plane of a slot type cutter and this works but in the corners it is not working like a round cutter and leaves sharp corners which then need filleting to finish, but also I am not sure if it is cutting exactly as if a solid round/cylinder cutter would.
I am trying to sweep a profile throughout the helical sweep path which is a series of 3d sketches. The sweet prifile sweeps correctly to the first 3d sketch profile but whin I select the second line the preview is gone and Inventor gives me an error saying the sweep cannot be done. how I can have the sweep done throughout the helical structure.Attached is the ipt file.
View 3 Replies View RelatedIs there some way to get the overall length of a sweep path?
We are creating a 3D sketch to run a pipe cross section along and for the final material we need to know what the LF is.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I have a project I'm working on which requires a sweep path to be a graphical parametric mathematical function in x, y and z.
ex:
x=1.25*sin(10*t)
y=sin(t)*(12+1.25*cos(10*t))+12
z=cos(t)*(12+1.25*cos(10*t))
(this curve is a groove in the surface a bicycle tire. It spirals around several times and gets subtracted from a solid torus)
I was using an old version of NX I-DEAS and this task was easily accomplished with the "function spline" feature. Is anything like this possible in Inventor? I know I could create a list of points in excel, but I'd really prefer not to.
I am trying to recreate and 3D model the impeller of a heartmate II LVAD (URL....) but I am having problems with the sweep along the helical path. The profile is the vertical line and the path is the helix. I want to use a surface output for now. I had to use Solidworks to generate a variable pitch helix and import into Inventor.
View 2 Replies View RelatedI encountered problem when using sweep (path&guide surface)
It was enable to give you preview option (which is a surface that i wanted) but when i hit OK. It gives error as the text box.I tried again to no avail.
I have a sweep that follows the shape of the path sketch, but the sweep itself is made to the right of the sketch. How can I get it to fall directly on the path? I have attached a picture of the sweep as well.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
I am having a difficult time centered the helical path (the equation curve) and lofting the two profiles (centered) through the helical path in the axial rotation direction..
View 5 Replies View RelatedWhen preparing an assembly for export to a Revit family, all features need to be recognized as Revit features. I have a part which consists of a sweep with a 3D path, 2 planar sketches projected to a 3D surface to be precise. To make matters worse, it's a sweep whose end meets it's own beginning (the intent of this specific model is to just satisfy a shape, not necessarily reflect the way it's going to be produced). To date I have not found a way to have this sweep feature recognized as a Revit feature, be it as a single feature or multiple. I am running Inventor Professional 2014 on Windows 8 64-bit.
View 2 Replies View RelatedAny way to sweep a rectangle along a 3D spline and keep the top of the rectangle parallel to the ground?
I make complex spiral handrail and when i sweep and rectangle along a 3D spline normally, it twists and is wrong. I know that there is a plug-in on sketch that is specifically designed for this called 'Follow me and keep' .
I tried to make rectangle and get into create path.but i don;'t know hot to.First I made Rectangle
Dim Rectangle as SketchEntityEmulator
Dim SplitPath as path
Set Rectangle = SketchPlane.SketchLines.AddAsTowPointRectangle(Point1, Point2)
then I tried Rectagle into Path
PartDef.Features.CreatePath(Rectangle)
But There is a error...How i make Path from Rectangle? then I tried to SplitFaces.
I Got Face from HoleFeature.
I Got Face like this.
Dim oFace as Face
Set oFace = HoleFeature.Faces.Item(1)
and For Split I Add Face to FaceCollection like this
Dim oFaceCollection as ObjecCollection
Set oFaceCollection = ThisApplication.TransientObjects.CreateObjectCollection
[code]....
I have a tunnel profile that I need to sweep around a path. This path is a 3D Polyline but it has arcs and slope associated with it. The sweep command has this automatic banking or twisting to it that just screws everything up. The profile needs to stay perpendicular to the path and the floor of this tunnel needs to remain flat.
I have attached the actual working drawing. It has the profile (which is a simple typical tunnel) and the path all situated.I'm working in AutoCAD 2012 if that really matters.
I'm trying to do a 3d curve stair rail. I had the 3d spline path, I had the polyline rail profile, but after I sweep the profile, it end up being twisted at the end of the rail. Same problem happens when I did a sweep using a helix path, imagine a vertically placed rectangular profile at one end of the path then after using sweep command, the other end was somehow twisted on a certain degree. How can I avoid this twisting problem
See the before and after image. I wanted the rectangle profile to remain vertical throughout the whole sweep
Is there a way to sweep a 3d polyline in AutoCAD 2012? Colleague has a sweep path that he wants to put radii in the corners. I know that in the past you could not do it. I didn't see anything in any post that told me otherwise.
View 3 Replies View RelatedI have been trying to convert this surface (attached file) into a closed volume. But somehow it isnt working.Then I tried to create this figure myself by creating two circles (one at the top and the other at the bottom) and then creating the path for using the sweep command , but it gives a error " sweep produces self intersecting curves".
convert this surface in to a sloid volume or if thats not possible can this geometry be created to the nearest possible approximation.
I have this part that need to be extrude along a complex path. However, every time i try this the bottom of the part does not stay parallel the the x-axis.
Here is the drawing:
Curved Stair.dwg
How does one draw a complex curved line to act as the path for a sweep in REVIT 14?
I need to create an arch (shown in elevation), that follows a curved path (shown in plan).
I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View Relatedgetting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View RelatedHow do I create a rectangle of my desired size/shape and position as a Shape Layer then convert it to an editable Path?
View 5 Replies View RelatedOn solidworks, There is an option to rotate the profile along the path as it sweeps. I'm curious if there is anything similar to that ability in Inventor? And if not, if there is a way to create a helix along a curved axis.
View 3 Replies View RelatedI have looked through these forums and found plenty of sweep problems and the answers to the problems but none for this particular type. I made a 3d intersection curve and am trying to sweep a profile along that curve but I keep getting the discontinuous segments error. I am using standard inventor 2011.
View 9 Replies View RelatedTrying to create a 3D sweep. I want to keep the sweep parallel to the XZ plane (like a parting surface). In the attached part, there is a SweepSrf3 that has sort of what I am trying to do, but it does not go all the way around the path. Notice how the sweep is parallel to the plane. I tried to do the same thing in SweepSrf4, by selecting the 3D Sketch1 as the path, Sketch2 as the profile, and Workplane2 as the Guide Surface. That failed.
In SweepSrf4, the only way that I could get the sweep to come close to working was to use the 3D Sketch1 as the guide rail and the circle as the Path. Seems like I need to use the circle as the guide rail and the 3D Sketch1 as the path to get what I want... but that fails.
I do not understand why whenever I go to select the rectangle/polygon(or other similar tools) sometimes-in the options bar-the path functions(subtract from area, add to shape area etc) are NOT available.
The one who is always available is the "create new shape layer".
I am having difficulty aligning the profile for a sweep feature. I need the profile to be normal to the path, but aligned vertically. In other words, the rectangular profile should remain "plumb" along the entire sweep. Is there a simple way to do this?
I have shared the sample files, trying to use the profile in two different ways, through Dropbox (they are too large to upload). I am using Inventor 2013.
[URL]........
I tried the tube and pipe run to build this segment, and cannot select the route from the 3D sketch.
This route was based off of a 3D sketch made from included geometry from another part.
Tried sweeping too - and get error that the sweeping operation did not produce a meaningful result.
But I don't get the self intersecting error.
All this is is a .250 OD and .180ID profile that needs to be run through the path.
I included the part file.
am using Inventor 2012. Is there any way to select two rails when sweeping? One for the x and one for the y. I can only select one rail. If I choose Profile Scaling X & Y, it does not sweep the way I want to.
View 1 Replies View RelatedI have created a pipe using sweep through 2 planes and 3d sketch. I want a specific bend on that pipe to be extracted for drawing purpose. How do I do that ?
View 9 Replies View Relatedi used to use Solidwork's sweep-cut with a solid body feature but i can't find it in Inventor now.
Procedure:
In part file;
Create a second solid body (must be axis-symetric, like revolved feature),
Create a path that intersects with the solid (can be a line or a curve),
Sweep the solid along the path with cut command.
I need this where the sweep-cut with a profile is not enough, to get surfaces obtainable by milling on a cylindirical body on a helical path.