AutoCAD Inventor :: Twist A Bar Shape
Feb 11, 2013Is it possible to twist a bar shape. I have the inventor part file as well as a jpeg file of what the device should look like. Is it even possible with inventor or fusion.?
View 3 Replies
ADVERTISEMENT
CorelDRAW X5 :: Shape Extrusion With A Twist / Spiral?
Mar 6, 2012I need to draw a transmission gear with spiral teeth, rather than straight teeth on a typical gear. I know how to work the extrusion tool, but I can't get the shape to twist so the teeth are all aligned.
Is there any way to do this in Corel Draw X5? I'm pretty sure Corel Draw is sophisticated enough to do something like this, I just can't figure out how. The manual shows how to extrude, but nothing really beyond that.
AutoCAD Inventor :: How To Twist Object Properly
Jun 10, 2013Essentially, I am attempting to create something similar to this: [URL] .....
But cannot get enough twisting action. I just need to know how to twist an object properly. For example, what I have done is created a two sketches of hexagons on offset planes, and lofted between the two sketches. If I rotate one hexagon sketch slightly, it will result in a twisting effect. However, if I want to get any significant amount of twisting, rotating the sketch does not work. I have tried with a goil, but that gets the entire object (with a sweep, in this case) to spiral.
AutoCAD Inventor :: Twist Rectangular Tube
Dec 24, 2013Im trying to reproduce the part attached. Its a rectangular aluminum tube. .320 x .180 approx an inch long. I tried lofting 2 sketches but the result does appear like the attached image.
View 8 Replies View RelatedAutoCAD Inventor :: Adding Twist To Gear Model
Mar 29, 2013I want to add a twist to my inventor gear model (helical gear). I need a twist approximate 30 degree.
File attached.
AutoCAD Inventor :: Sheet Metal - Fold (bend And Twist)
Apr 23, 2012I have the following sheet metal application: A flat bar steel (strip) 40x1mm is bent and twisted around three cylinders. In our process, the strip is running in loop around these cylinders, like a conveyor-belt. At first, it is bent around the first cylinder (blue). Then, it is bent and twisted around the second cylinder (green). Between these cylinders, a flat part is modelled so that the strip will be bent upwards (twisted) around the next cylinder. The same is done between cylinder two and three. In praxis, when I bend the strip, no flat part will be present, because the strip is quite stiff, as it is spring steel. In my Inventor model, no stiffness of the strip is taken into consideration.
I am looking for a better way to model this strip, where stiffness of the material is taken into consideration.
AutoCAD Inventor :: How To Generate Guide Rail To Control Twist
Sep 18, 2012I am trying to model a forged steel table base so I can create some tooling to reproduce it. See the attached photo of the base. I am able to sweep along my 3D projected sketch path but there is a twist at the center that I believe I need a guide rail to control. I have tried to draw a rail but it fails.
I suspect I am not drawing my guide rail correctly as to create the slight twist. I was considering drawing a shallow helix along the 3d sweep path but not sure that this is the best direction to head next. I have attached the .ipt with the sweep (without guide path being used).
AutoCAD Inventor :: Embossing Text / Shape To Cone Shape Using Wrap To Face
Nov 26, 2013I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
AutoCAD Inventor :: How To Revolve A Shape Around The Shape Of Window (oval)
Feb 19, 2012i am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
AutoCAD 2013 :: Extruding With A Twist?
Aug 19, 2013I am trying to create a solid model of a helical gear and need to know how to include a rotation or twist with the extrusion.
View 2 Replies View RelatedAutoCad :: Ramp And Twist Fillet On Column
Oct 21, 2011I have a problem I am using Autocad lite 2011 and need to draw if you can picture a column with a 15 mm deep fillet 42 mm wide which has a ramp and twist applied to it spiraling all the way up it. How do i go about this.
View 9 Replies View RelatedAutoCad 3D :: Make Two Objects Twist Around Each Other (2011)
Apr 11, 2011I’ve attached an image of what I'm trying to create in 3D .I can make two straight prongs with no problem, but I can’t figure out how to get them to twist around each other as they are in the picture. It’s important that the two prongs are symmetrical and do not merge into one another where they twist.
View 9 Replies View RelatedAutoCAD 2010 :: 3D Curve Sweep Without Twist At The End Of Path?
May 23, 2012I'm trying to do a 3d curve stair rail. I had the 3d spline path, I had the polyline rail profile, but after I sweep the profile, it end up being twisted at the end of the rail. Same problem happens when I did a sweep using a helix path, imagine a vertically placed rectangular profile at one end of the path then after using sweep command, the other end was somehow twisted on a certain degree. How can I avoid this twisting problem
See the before and after image. I wanted the rectangle profile to remain vertical throughout the whole sweep
AutoCAD 2013 :: Entries Twist Except The Text As Display?
Jun 7, 2013We meet a strange problem that all the line and cirele are twist as display. copy this file to another machine, or another version of AutoCAD, the problem still exist.
is thare a system value to control display effects?
AutoCAD Civil 3D :: Sid Don't Plot With DVIEW Screen Twist At 270 Degrees
Jun 12, 2012plotting a MrSid using DVIEW TW 270 ? Naturally we've spend 2 days on this. DVIEW used to be a great way to create dynamic views...
View 8 Replies View RelatedAutoCAD 2013 :: Get View Twist Angle To Match Line Exact?
May 22, 2012How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
AutoCAD Civil 3D :: Surface Labels Lose Annotative Properties After DVIEW TWIST
May 8, 2012I use DVIEW and my contour and slope labels shrink. I suspect the dreaded OE factor but cannot confirm.
Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900
3ds Max :: Twist In The Image Plane
Mar 8, 2011Panning / dollying the camera, the image plane is still trying to maintain a 'forward' looking view to the camera. I would like to lock the talent / image plane so that when I do a camera move, the talent is 'sticking' to the virtual news room I have used.
View 2 Replies View RelatedIllustrator :: How To Eliminate Twist In Blends
Oct 29, 2012How do I get rid of this twist in my blend? I've tried to rotate the rectangles to eliminate the twist, but it doesn't seem to fix the issue.
View 2 Replies View RelatedPhotoshop :: Overexposed Face With A Marquee Twist?
Dec 11, 2012I can draw the marquee squares or elipse. I can draw them and constrain them and reposition them.
What I cannot figure out is once I have drawn the shape, let go of the mouse and want to THEN go and change the size & shape of the marquee, how to do it. How do I make the top/bottom of a circular elipse change? And then bring a side in? Do I have to keep re-drawing until I am perfect?
I have some images with some very tough lighting. I think the images were shot in the wrong camera ISO settings. So most of the pictures have 4-5 people in them and it is there faces that have this HUGE amount of overexposure going on. How can I isolate their faces to work on the exposure/lighting/color correction for their heads? And then select inverse(?) and correct the rest of the area?
3ds Max Modeling :: Twist Splines Around Each Other Like Strands In A Rope?
Apr 19, 2012Want to twist the splines around each other like strands in a rope and then use particle flow to unravel them.
What is the best way to twist the splines?
Illustrator :: Any Way To Apply Twist Effect Twice In Opposite Directions
Feb 13, 2014I am trying to draw a sun-like shape. I started with a star polygon and apply the Twist effect. That gets me pretty good arms on the sun, but I'd like for something a bit more flame-like, so I'd like to get the arms to now bend back in the opposite direction. Is there any way to use or modify the Twist effect so that I can apply it a second time but bend further out in the opposite direction? Or is there some other good way to get the rotation along all the arms.
View 6 Replies View RelatedMaya Animation :: How To Create Forearm Twist Expressions For IK Mode
Jul 31, 2013I was wondering how to you create a forearm twist expressions for IK mode?
View 2 Replies View RelatedAutoCAD Inventor :: IDW To Dwg 2d-shape
Apr 12, 2013I have inventor 2013 and I try to convert a idw drawing with 3 sheets to a dwg/dxf version for a supplier who has ACAD LT2012. I tried to save as LT version, but he told me he just get a picture (bitmap image). He asked me if I can export out to a 2d shape. What do I have to do?
View 4 Replies View RelatedAutoCAD Inventor :: Cannot Extrude 2D Shape
Oct 10, 2011I cannot extrude a 2D shape that is drawn by lines.It appears to be linked but is not .I can see the problem saying not a closed loop or a constraint but don't know how to fix it.
View 6 Replies View RelatedAutoCAD Inventor :: Possible To Chamfer Shape
Oct 7, 2011Is it possible to chamfer shape like this (the white line) so that the chamfer degree and top chamfer length is same all around including the part on top of the slide? My goal is to use 0,75mm chamfer. I get error when I try to do it. URL.....
View 4 Replies View RelatedAutoCAD Inventor :: Getting Desired Shape On A Cut
Oct 7, 2011I`m having some trouble getting the desired shape on a cut.I used a Extrusion cut which is the desired shape except i need the cut to get deeper as it travels around the bowl.In the picture with this post the cut starts at point A and travels around to point B.I need point B to be 60mm lower as it passes point A.As it travels around the bowl from A to B the cut gets deeper..I was thinking maybe the Coil feature .
View 9 Replies View RelatedAutoCAD Inventor :: Using Interference To Determine Cut Shape?
Mar 1, 2013Is there a way to use interference checks to determine what material needs to be subtracted away from other parts to get the clearance needed? (See Attached) The way I typically handle this is to project the lines from one part onto the sketch of another and proceed accordingly, however as you can see, it didn't work out well in this instance as the face of the part in question is not parallel with the sketch plane in the other..Therefore making the cut location inaccurate.
View 2 Replies View RelatedAutoCAD Inventor :: Triangular Shape In Sheetmetal?
Nov 6, 2012what is the best way for me to design the attached part.
View 3 Replies View RelatedAutoCAD Inventor :: Beveled Edge On Box Shape
Mar 6, 2012I am fresh on the inventor bandwagon so this may seem remedial.
I have a box shape, open in the front which will be 1 part of a larger furniture unit.
I would like to create a beveled edge along the front face to receive a similarly beveled drawer.
This has been a problem.
I've read that I should look in the surface window and choose planar surface, but the inventor 2012 that I have has no planar surface tab.
So, any better way to create a bevel on an open box.
AutoCAD Inventor :: Moving Around A Complex Shape
Sep 23, 2011I have a problem regarding a mechanical design. I want to make a pin move around a complex shape, always tangent to the sides of the shape. The point is not to have it animated, but I need the constrain so I can further work on the mechanical design.
I've attached a photo and the files.